10" 1024x600 monitor with battery and HDMI input for your upcoming GH2, $130 only

[Vitaliy Kiselev]

NURBS: You provided complete part number?

Mine was - CLAA102NA0ACW

As for inside. Mine is pretty ok.

 

[NURBS]

My is different model. My 10.1' Your 10.2'

Model: BT101/W02 PN: B101AW06V1

Specifications: 10.1", WSVGA (1024x600), Glossy, LED backlight, 200nits, 8ms, 500:1 <- Contrast not too bad

And stand screw on wrong position for me.

 

[Vitaliy Kiselev]

Yeah, they replaced LCD panel.

I suggest to replace it to S-IPS next time

 

[NURBS]

But for that money it's a perfect baby. :happy:

 

[Vitaliy Kiselev]

Under screw position you mean that it is better to have it on bottom of the unit ala Lilliput models?

 

[NURBS]

Yes, it's better for FF monitor.

 

[Vitaliy Kiselev]

Yes, it's better for FF monitor.

It is not hard to solve.
You need 1/4" screw, 1/4" thumb screw (look at hot shoe to 1/4 adapters, they have two of them), and metal plate.
Fold metal plate so small part will be at 90 degrees and below monitor, make two holes. Fix plate with 1/4" screw to monitor, and use another to fix whole thing to your mount.

 

[NURBS]

Yes I'll do something for this thinking about hand like this.

 

[Vitaliy Kiselev]

http://cgi.ebay.com/Lightweight-Var...cessories_TripodsSupports&hash=item4154e31b13
Very cheap. Works good.

 

[Vitaliy Kiselev]

http://www.aliexpress.com/store/803...with-TV-HDMI-input-support-Real-Media-RM.html
Did any body use this one?

No, because it is really the same player/monitor, with same case, but used LCD is smaller.
So, I do not see any point of using it.


BTW, guys.
Viner Chan is direct representative of manufacturer, as far as I know

 

[Cory Braun]

Would this work well with the 5D, with it only outputting SD? Also is it safe to attach monitors to an arm and attach that to the cameras mount? I would worry that it would rip out the camera mount.

 

[Vitaliy Kiselev]

Would this work well with the 5D, with it only outputting SD?

By idea it must work.
May be some firmware/EDID fixes will be required for better work.

Also is it safe to attach monitors to an arm and attach that to the cameras mount? I would worry that it would rip out the camera mount.

Use flash bracket to mount monitor to the bracket.
http://cgi.ebay.com/FLASHGUN-Flash-...=Camera_Flash_Accessories&hash=item1c17a0ccd5
You cal use more costly foldable brackets.

 

[Cory Braun]

By idea it must work.
May be some firmware/EDID fixes will be required for better work.



Use flash bracket to mount monitor to the bracket.
http://cgi.ebay.com/FLASHGUN-Flash-...=Camera_Flash_Accessories&hash=item1c17a0ccd5
You cal use more costly foldable brackets.

Thanks.

So I would attach the flash bracket onto the camera mount and then attach the monitor to the flash bracket?

 

[Vitaliy Kiselev]

Thanks.

So I would attach the flash bracket onto the camera mount and then attach the monitor to the flash bracket?

Normally you need monitor arm also - http://cgi.ebay.com/Lightweight-Var...cessories_TripodsSupports&hash=item4154e31b13.
You'll attach one end to flash bracket (removing plastic flash shoe) and other end to monitor.
Very handy.

 

[Cory Braun]

Normally you need monitor arm also - http://cgi.ebay.com/Lightweight-Var...cessories_TripodsSupports&hash=item4154e31b13.
You'll attach one end to flash bracket (removing plastic flash shoe) and other end to monitor.
Very handy.

What's the benefit of using the flash bracket rather than connecting the arm directly to the camera?

 

[DrDave]

I love to see a zoom on a mount that cost more than the zoom

 

[Vitaliy Kiselev]

What's the benefit of using the flash bracket rather than connecting the arm directly to the camera?

"is it safe to attach monitors to an arm and attach that to the cameras mount" this had been writtent by your second personality?

 

[Cory Braun]

"is it safe to attach monitors to an arm and attach that to the cameras mount" this had been writtent by your second personality?

Haha, yea I figured that's why you were recommending it to me, but I don't get why it's safer if I am still attaching the flash bracket to the mount on the camera and then the arm to the flash bracket and the monitor to the arm. Won't it still be putting the same amount of weight on the mount on top of the camera? I am probably just not understanding it correctly.

 

[Futchibon]

Would this work with the gh13 to get a standard def out if I used an rca to vga adaptor (it has a vga input)

THANKS

 

[Futchibon]

Does it take batteries? Doesn't seem to.

Here's one that does, only 7" and $220, but it takes batteries and it's 1920X1080:

http://cgi.ebay.com.au/Lilliput-7-6...=AU_Car_Parts_Accessories&hash=item3a60e063a6