GH1 firmware research volunteers required

Do you think that the upcoming firmare - ver 1.3 will be compatible with your tool, or you will need to adjust it?
Thanks for the effort and good luck.

Directly, no.
But PTool will be adjusted to it.
If Panasonic keeps making new firmware versions pretty fast, I'll add my dynamic engine to prevent manual adjusting. Manual check is just safer for now.
 
`and if there's any extra money left over, the boards will decide what to do with it. maybe buy tester13 a beer.`

Most certainly..
 
I don't want to cast aspertions where they are not justified, but isn't this link one of those Brooklyn joints that should be avoided at all costs?

On another note, I suggest as many beers as tester13 can drink - after he's finished everyhting. :bath:

Yes I believe it is. Even if it isn't, 99.1% is HORRIBLE feedback (seriously.)

http://cgi.ebay.com/Panasonic-Lumix...ewItem&pt=Digital_Cameras&hash=item1c11e04aa1

100% positive. this link was posted by ydgmdlu (1766 posts) in http://www.dvxuser.com/V6/showthread.php?t=206577&page=2
 
Ok so now that we seem to be on our way to have custom GH1 firmware I imagine many of us will want pretty different firmware.

long term wise
Should there be a compendium of premade choices or could we have tester and others create custom firmwares for a individual fee?
 
Testing new firmware for Ptool 3.03:

AVCHD FHD mode:

Maximum Overall bit rate : 18.0 Mbps

Audio:

Format : AC-3
Bit rate mode : Constant
Bit rate : 192 Kbps
Sampling rate : 48.0 KHz


MJPEG mode:

Overall bit rate : 11.0 Mbps
Frame rate : 24.000 fps

;) I don't have NLE in this moment but Mediainfo show this info. ;)

Regards
NURBS
 
Testing new firmware for Ptool 3.03:

Format : AC-3
Bit rate mode : Constant
Bit rate : 192 Kbps
Sampling rate : 48.0 KHz

MJPEG mode:

OK. I need your precise values for AVCHD patches.
I suggest to apply all VA patches from v3.05.
Up both bitrates to 20.000.000 - 24.000.000 (with Top Limit it must be much better).
Low values are also interesting (<13).
You could also recheck 23,97 and wrapper behaviour.
MJPEG bitrate seems to be set on per frame basis (so we need distribution of frame sizes, top, average, etc), as we have dropped framerate for 24p.
 
Testing Ptool 3.05:

AVCHD mode is same as 3.03

VIDEO:

Bit rate : 11.0 Mbps
Maximum bit rate : 16.6 Mbps

Audio:

Format : AC-3
Bit rate mode : Constant
Bit rate : 192 Kbps
Sampling rate : 48.0 KHz

MJPEG mode have a problem, when I stop recording, camera be freezing and restart. And files can't open. (MJPEG mode fault). ;-)

Regards
NURBS
 
Again.
I need list of all values set and patches applied. Without such info it is not much use.
And try to set them low also.

As for MJPEG we must look at this later.
Try open these files in any universal player.
 
I apply in 3.05 ver.

Version change (X)
30min limit removal (X)
VA bitrate top limit (20->25Mbps) (X)
MJPEG (30->24fps) (X)
Audio sampling rate (X)

MJPEG files can open any player ;-)

AVCHD FHD mode info:

General
ID : 0
Complete name : E:\PRIVATE\AVCHD\BDMV\STREAM\00000.MTS
Format : BDAV
Format/Info : Blu-ray Video
File size : 127 MiB
Duration : 1mn 31s
Overall bit rate : 11.6 Mbps
Maximum Overall bit rate : 18.0 Mbps

Video
ID : 4113 (0x1011)
Menu ID : 1 (0x1)
Format : AVC
Format/Info : Advanced Video Codec
Format profile : High@L4.0
Format settings, CABAC : No
Format settings, ReFrames : 2 frames
Duration : 1mn 31s
Bit rate mode : Variable
Bit rate : 11.0 Mbps
Maximum bit rate : 16.6 Mbps
Width : 1 920 pixels
Height : 1 080 pixels
Display aspect ratio : 16:9
Frame rate : 25.000 fps
Standard : NTSC
Resolution : 8 bits
Colorimetry : 4:2:0
Scan type : Interlaced
Scan order : Top Field First
Bits/(Pixel*Frame) : 0.212
Stream size : 120 MiB (94%)

Audio
ID : 4352 (0x1100)
Menu ID : 1 (0x1)
Format : AC-3
Format/Info : Audio Coding 3
Format_Settings_ModeExtension : CM (complete main)
Duration : 1mn 31s
Bit rate mode : Constant
Bit rate : 192 Kbps
Channel(s) : 2 channels
Channel positions : Front: L R
Sampling rate : 48.0 KHz
Stream size : 2.09 MiB (2%)

Regards
NURBS
 
Wonderful that this great little camera will be genuinely upgraded while we're still young!

I'm very interested in any image quality optimisation in 1080p mode (datarate, changes to P frames) since I've only felt 720p was safe enough to use so far. Wow, the possibility of using mjpeg mode for the first time is now on the cards -- formerly discounted by me on account of no 25 fps. I think what I'm feeling is excitement...let the good times roll.

Can't keep up with the momentum of this thread; next week: solving world peace.
 
No, I mean patch values.
VA bitrate top limit without applied two other bitrate patches is pointless.
So, you must enable them also and enter proper values for both.
First - something around 22Mbps.
Second try - something in 10-12Mbps range.

Audio sampling patch must be disabled.
 
Okey I'm understand'

I apply in 3.05 ver.

Version change (X)
30min limit removal (X)
VA bitrate adjustment (X)
VA bitrate adjustment 2 (X)
VA bitrate top limit (20->25Mbps) (X)

update now:

Video
ID : 4113 (0x1011)
Menu ID : 1 (0x1)
Format : AVC
Format/Info : Advanced Video Codec
Format profile : High@L4.0
Format settings, CABAC : No
Format settings, ReFrames : 2 frames
Duration : 1mn 37s
Bit rate mode : Variable
Bit rate : 13.2 Mbps
Maximum bit rate : 16.6 Mbps
Width : 1 920 pixels
Height : 1 080 pixels
Display aspect ratio : 16:9
Frame rate : 25.000 fps
Standard : NTSC
Resolution : 8 bits
Colorimetry : 4:2:0
Scan type : Interlaced
Scan order : Top Field First
Bits/(Pixel*Frame) : 0.255
Stream size : 154 MiB (95%)
 
NURBS

Values you entered???
I believe that you leave all by default?
And why it is 25fps NTSC??? It is 25fps PAL model :-).
It is also worth checking 720p 23,97 fps and 60i wrapper patch (only for NTSC camera owners!).

If all testing will be detailed and completed i could provide you to personal V3.05 Private with PAL/NTSC switching.
 
Last edited:
Back
Top