DIY IndieSlider...

Hello,

I'm hoping to build one of these sliders for myself through also ordering the parts from IGUS. I read the directions for ordering and building on the first page (of this thread) and I just wanted to check if somewhere on this thread this info was updated (which parts, etc.) and if so, what page on this can I find it on.

I'm looking to build one that's around 3 feet long so I guess the 1000mm rail would be good for me. I have the velbon dv-700 tripod that I'll be mounting this on.

Thanks for taking the time to show everyone this and for answering all these questions.

Jason
--
Canon HV20, Jag35Pro
 
drumbeatjay said:
Hello,

I'm hoping to build one of these sliders for myself through also ordering the parts from IGUS. I read the directions for ordering and building on the first page (of this thread) and I just wanted to check if somewhere on this thread this info was updated (which parts, etc.) and if so, what page on this can I find it on.

I'm looking to build one that's around 3 feet long so I guess the 1000mm rail would be good for me. I have the velbon dv-700 tripod that I'll be mounting this on.

Thanks for taking the time to show everyone this and for answering all these questions.

Jason
--
Canon HV20, Jag35Pro
Click to expand...

I keep the first post updated, so yes, those are the proper part numbers & phone numbers.

I've sold so many of these, you can call igus and just ask for the ZazaSlider and they'll know exactly what you need!

Follow the direction, it's easy. If you need help or have questions, feel free to post here or PM me and I'd be glad to help.
 
Hey, so I think the Indian DVcity place is selling basically the zaza slider now:

http://dvcity.com/dve/product_info.php?products_id=328

Those are the same pieces right? Except they have the nice side things and have it all screwed together for you. It is 3 feet and just a bit more $ than buying the igus parts right? SO what do you think? SHould I get the DVcity one? How much am I looking at saving If I built a 3 foot one I wonder. I have read through most of this thread but it has been a while so I would appreciate it if someone reminded me about price when all is said and done/assembled.
 
Yeh, but where are they located? If it's India not only will you have to pay international shipping, but also import duties...
 
No import costs I am pretty sure. Shipping is like 40 bucks and is super fast. They are known for having cheap quality stuff at cheap prices basically. But I guess at 240 it may not be worth it. How much would a 3 foot zaza slider cost with the ends and screws amd everything? Like $180?
 
Jackson Miller said:
No import costs I am pretty sure. Shipping is like 40 bucks and is super fast. They are known for having cheap quality stuff at cheap prices basically. But I guess at 240 it may not be worth it. How much would a 3 foot zaza slider cost with the ends and screws amd everything? Like $180?
Click to expand...

First, why, in the DIY section, do folks feel the need to come in and say, "Well, xxxx company actually sells these?"

Second, DVCity is selling a cheap knock-off of the Glidetrack. It does not use IGUS parts. It uses cheap imitations. The bearings are not Dry-Lin and are not as reliable, and they are very noisy from examples I've seen (and heard).

Building it yourself, you'll spend about $200 after investing in a riser and end-stop hardware (the rail and carriage are $160), and you'll have the real IGUS parts.
 
C2V said:
First, why, in the DIY section, do folks feel the need to come in and say, "Well, xxxx company actually sells these?"

Second, DVCity is selling a cheap knock-off of the Glidetrack. It does not use IGUS parts. It uses cheap imitations. The bearings are not Dry-Lin and are not as reliable, and they are very noisy from examples I've seen (and heard).

Building it yourself, you'll spend about $200 after investing in a riser and end-stop hardware (the rail and carriage are $160), and you'll have the real IGUS parts.
Click to expand...


Thanks. That is what I was asking. If they are not Igus parts I will do it the DIY way. I happened to have store credit to DVcity though. I was able to get it refunded (something they typically do not do). I will behappy to never buy from them again after having two follow focuses break.
 
NOTE... for those of you in New Zealand & Australia.

I received quite a few questions regarding getting these parts in Australia, so I contacted the igus rep and here's his answer:

"We have a distributor in New Zealand - automation equipment ltd. - +62-7-847-2082 - but no direct office - They could order from us via credit card and we could ship parts to them."

I'll put this information in the first post also......
 
Australia has a distributor also, but they charge $170USD for the carriage alone and $200USD per metre for the rails :(. We sadly get jibbed here.
 
zhenjie said:
Australia has a distributor also, but they charge $170USD for the carriage alone and $200USD per metre for the rails :(. We sadly get jibbed here.
Click to expand...

Given the current Oz dollar exchange rate to the UK pound, that makes the Glidetrack a reasonable option.
 
zhenjie said:
Australia has a distributor also, but they charge $170USD for the carriage alone and $200USD per metre for the rails :(. We sadly get jibbed here.
Click to expand...

Did you check with the distributor in New Zealand?

I talked directly to the igus rep and he said there isn't a distributor in Australia, so that would explain why it's so expensive.

Also, why not use a credit card and order it from the US?

...just some thoughts to ponder....
 
Does anyone else think the Igus site is a mess? I tried to search for those parts and nothing came up.

How much do the rails and carriage cost?
 
bmxbud4130 said:
Does anyone else think the Igus site is a mess? I tried to search for those parts and nothing came up.

How much do the rails and carriage cost?
Click to expand...


The cost is right around $160, as stated in the first post on this thread.

As for the website, no it is not the cleanest or most user-friendly website on the Interwebs, but the parts are not hard to find. Go to igus.com, scroll down a little and click on the icon for DryLin Linear Bearings and Guides. Then click on DryLin W Linear Guides and you'll have the parts in front of you (scroll down just a little to get to the quote chart, and use the center column (16mm bearing).
 
Shawn Philip Nelson said:
Hey Zaza, how goes the "WiderSlider"?

Also, what do you make of Kessler's direction with cranks http://www.kesslercrane.com/index.php?option=com_content&task=blogcategory&id=42&Itemid=105
Click to expand...

Shawn... sorry about the delays (family stuff these days). I have been working on it. My biggest problem is finding a reasonable machine shop to do some fabricating.

I'm using single rail and a much wider & longer carriage. I want to have it machined out (the carriage) to allow for a bowl adapter.

picture.php


picture.php


I'm also working on a few other things...:thumbsup:

As far as Kessler's PocketDolly....like all Kessler stuff, I'm sure it's a really solid piece of gear. Personally, for me and my smaller cameras (DVX & HMC), I prefer to just slide by hand. I wouldn't use the krank much. Might be a good option for heavier rigs like yours though. I know he's working on a heavier-duty version.
 
ZazaCast said:
Did you check with the distributor in New Zealand?

I talked directly to the igus rep and he said there isn't a distributor in Australia, so that would explain why it's so expensive.

Also, why not use a credit card and order it from the US?

...just some thoughts to ponder....
Click to expand...

Haven't checked out the NZ rep, will give them a call today. There is an Australian rep which I found on their website.

USA is an option but postage was $160USD :(. In the end, it does work out cheaper to buy from Glidetrack with the weak GBP. Else I'll buy a Indislider as last resort.
 
> Also, what do you make of Kessler's direction with cranks

I played with the kessler crank slider at cinegear. It's solid and cool, but I too would rather just move it by hand. The only real upside to a crank it the potential to convert it to a motor - ie: moco...
 
You must log in or register to reply here.
Back
Top