GH1 firmware research volunteers required

I think Vitaliy meant from 12 to 15.
Good luck.

He states that 15 is with pulldown and then says that with the patch it goes to 12 to make it standard 0.5 seconds. So I guess it has to go down to 12 in the GOP size option to match with the native setting. I am waiting until the dust settles to patch my GH1. I want to but I'll wait for the testing to move ahead. Until all the combinations are figured out by the experts!
 
He states that 15 is with pulldown and then says that with the patch it goes to 12 to make it standard 0.5 seconds. So I guess it has to go down to 12 in the GOP size option to match with the native setting. I am waiting until the dust settles to patch my GH1. I want to but I'll wait for the testing to move ahead. Until all the combinations are figured out by the experts!

John, it is clearly not place to discuss your understanding of my words.
PM me if you want to ask such questions next time.

As for my answer.
I don't know how you could interpret it as suggestion to make 12 GOP length.
Again - 24p patch changes GOP from 15 to 12. So, in 60i (without patch) GOP length is bigger. If you have problems in 24p you must input bigger GOP values in corresponding patch.
 
One more notice.

...
Good news.

I now have G2 firmware from undisclosed source. All seems pretty promising.
Really stunning stuff here, thank you for what you've done for us! I love GH13

But GH1 only support FAT32, not exFAT, this limits single file size to no more than 4GB, which typically means video clip no longer than 30 minutes, thus make the removal of 30min limit somewhat lame. What a pity.

Is it possible to port G2' support for SDXC(exFAT) into GH13?
 
Really stunning stuff here, thank you for what you've done for us! I love GH13

No emotions here, ok?

But GH1 only support FAT32, not exFAT, this limits single file size to no more than 4GB, which typically means video clip no longer than 30 minutes, thus make the removal of 30min limit somewhat lame. What a pity.
Is it possible to port G2' support for SDXC(exFAT) into GH13?

Your text is very uncorrect here. 30min is not related to 4GB limit.
As well as support of SDXC and exFAT do not mean support of files with more than 4Gb file size.
Any porting is, of course, impossible.
 
PTool 3.37d released

www.pentax-hack.info/firmware/pan/ptool3d.zip

GH1
Bitrate Adjustment Simplified renamed to Bitrate Adjustment FHD/SH Simplified.
Bitrate Adjustment H Added.
Bitrate Adjustment L Added (both by jobless request).

GF1
Compare version ported.
Bitrate Adjustment FHD/SH Simplified patch (non-simplified version removed)
Bitrate Adjustment H Added.
Bitrate Adjustment L Added (both by jobless request).

Last two bitrate adjustment patches require usage of first one.

From now on, first "d" will be available and only after testing it'll move to stable state available on first page.
 
Small notice.

From now on all messages from members with less than 15 messages will be deleted immediately in this sub-forum.
Send me your report by PM if you are new to this forum or, better, look at FAQ.
 
PTool 3.37d released

GH1
Bitrate Adjustment Simplified renamed to Bitrate Adjustment FHD/SH Simplified.
Bitrate Adjustment H Added.
Bitrate Adjustment L Added (both by jobless request).

I currently use B) setting (stable in both FHD and SH), so I set H to 22 and L to 16. They are working as I expected. I got around 21mbps footage from H and 15mbps footage from L. Thank you, Vitaliy and a nice request, jobless.
 
testing on gf1

testing on gf1

PTool 3.37d released

GF1
Compare version ported.
Bitrate Adjustment FHD/SH Simplified patch (non-simplified version removed)
Bitrate Adjustment H Added.
Bitrate Adjustment L Added (both by jobless request).

card 1 saved as gf1__129 :
version change
version compare

mjpeg quality 256 220 200 184
Table 56 56 56 56 (worked 25-45mbit/s)

avchd sh=66 h=54 l=32
overall 68
limit 70
(Crashed my camera had to remove battery
in all settings of avchd lern my lesson)

card 2:
only checked version compare patch
didn't work with the name: gf1__129
When I changed the name to gf1__130 it uploaded fine

mjpeg quality 256 220 200 184 table 100 105 110 115 (worked 15-35mbit/s) must find a better detail scene

avchd sh=50 h=32 L=22
overall 52
limit 60
worked as expected.
 
Another Reminder:

ONLY qualified testers should be posting in this forum! This thread exists in an entirely different subsection of the forum, which is devoted to firmware development. No questions, comments, etc are here. This is a noise-free environment.

Thanks for your cooperation.
 
PTool 3.37d released

www.pentax-hack.info/firmware/pan/ptool3d.zip

GH1
Bitrate Adjustment Simplified renamed to Bitrate Adjustment FHD/SH Simplified.
Bitrate Adjustment H Added.
Bitrate Adjustment L Added (both by jobless request).

OK, just tried it. I'm not sure how useful it is just to say: "It works" but, It works. ;)

I set:

  1. Version Compare Patch (never used Version Change - ever)
  2. 3rd party Battery (though I only have just the one Panny battery anyway :D)
  3. Interface Language:: Anglish. ;)
  4. Native 24p/25p
  5. MJPEG 4:2:2
  6. Bitrate Adjustment FHD/SH Simplified: 40,000,000
  7. Bitrate Adjustment H Added: 38,000,000
  8. Bitrate Adjustment L Added: 36,000,000
  9. Overall Bitrate: 44,000,000
  10. Limiting Bitrate: 48,000,000

And then took a crazy ~1.2min. video in low room lighting with a 2.8/45mm Tessar Zeiss in each of of the following modes:

  • AVCHD: FHD
    PlexSnapz_005.jpg

    And from Adobe Premiere's File Info:
    • File Path: /Volumes/NO NAME/PRIVATE/AVCHD/BDMV/STREAM/00000.MTS
    • Type: MPEG Movie
    • File Size: 121.5 MB
    • Image Size: 1920 x 1080
    • Pixel Depth: 32
    • Frame Rate: 23.97
    • Source Audio Format: 48000 Hz - compressed - Stereo
    • Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
    • Total Duration: 00;01;18;02
    • Average Data Rate: 1.6 MB / second
    • Pixel Aspect Ratio: 1.0
  • AVCHD: SHD
    PlexSnapz_004.jpg

    And from Adobe Premiere's File Info:
    • File Path: /Volumes/NO NAME/PRIVATE/AVCHD/BDMV/STREAM/00001.MTS
    • Type: MPEG Movie
    • File Size: 85.8 MB
    • Image Size: 1280 x 720
    • Pixel Depth: 32
    • Frame Rate: 59.94
    • Source Audio Format: 48000 Hz - compressed - Stereo
    • Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
    • Total Duration: 00:01:01:30
    • Average Data Rate: 1.4 MB / second
    • Pixel Aspect Ratio: 1.0
  • AVCHD: H
    PlexSnapz_003.jpg

    And from Adobe Premiere's File Info:
    • File Path: /Volumes/NO NAME/PRIVATE/AVCHD/BDMV/STREAM/00002.MTS
    • Type: MPEG Movie
    • File Size: 126.3 MB
    • Image Size: 1280 x 720
    • Pixel Depth: 32
    • Frame Rate: 59.94
    • Source Audio Format: 48000 Hz - compressed - Stereo
    • Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
    • Total Duration: 00;01;26;34
    • Average Data Rate: 1.5 MB / second
    • Pixel Aspect Ratio: 1.0
  • AVCHD: L
    PlexSnapz_002.jpg

    And from Adobe Premiere's File Info:
    • File Path: /Volumes/NO NAME/PRIVATE/AVCHD/BDMV/STREAM/00003.MTS
    • Type: MPEG Movie
    • File Size: 99.5 MB
    • Image Size: 1280 x 720
    • Pixel Depth: 32
    • Frame Rate: 59.94
    • Source Audio Format: 48000 Hz - compressed - Stereo
    • Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
    • Total Duration: 00:01:06:30
    • Average Data Rate: 1.5 MB / second
    • Pixel Aspect Ratio: 1.0
  • MJPEG: HD (Data Rate reported by QT7: 19.42 - no variance)
    PlexSnapz_001.jpg


More info later if you want. For now I must sleep.

But everything just worked! :) (I guess... the bitrates are low tho aren't they? shurg)
 
Last edited:
But GH1 only support FAT32, not exFAT, this limits single file size to no more than 4GB, which typically means video clip no longer than 30 minutes, thus make the removal of 30min limit somewhat lame. What a pity.

AVCHD file spans on the GH1. Lot more convenient then having to wait a couple seconds to hit record again.


BTW..
Note to testers

I need to know TV modes (FullHD TV connected via HDMI to camera) while playing photos with various aspect ratios and videos at 50fps, 60fps, 50/60i containers, 24/25p native.
Please check your HDMI Mode menu setting before testing (must be AUTO).

Vitaliy, did you get ALL the data you needed from that? Finally got my Mini-HDMI cable today. I also have a HDMI capture card for non-HDCP video.. if stills or clips would be in any way useful to any testing.
 
John, it is clearly not place to discuss your understanding of my words.
PM me if you want to ask such questions next time.

As for my answer.
I don't know how you could interpret it as suggestion to make 12 GOP length.
Again - 24p patch changes GOP from 15 to 12. So, in 60i (without patch) GOP length is bigger. If you have problems in 24p you must input bigger GOP values in corresponding patch.

Sorry and thanks. I'll go away to another section now. Keep up the good work.
 
Sorry I didn't notice that this thread is only for pure firmware development discussion.

And here is the test result of mine (3.36), checked:
version change (2)
version compare patch
3rd-party battery
interface language (english)
30min limit removal
native 24p/25p
video bitrate adjustment simplified (22M)
overall bitrate adjustment (24M)
limiting bitrate adjustment (26M)
audio encoding bps (384000)

Everything went OK during firmware upgrade, but after the upgrade, you can record video in AVCHD FHD or SH, but playback doesn't work, it said "motion image can not be recognized" or something like that, and you can't delete those video clips either. But the video clips work well on my computer.
 
Sensor m4 Adjustment 3 Test

Sensor m4 Adjustment 3 Test

I have redone my Sensor m4 Adjustment 3 test with the setting at "5".

I could not repeat the white balancing issue I experienced, so that was likely due to a testing error. So no noticable changes as of yet to report with the Adjustment 3 setting.
 
Sensor m4 Adjustment 4 Test

Sensor m4 Adjustment 4 Test

MJPEG Quality Patched -> 384, 330, 300, 276
MJPEF Tables Patched -> 24, 24, 24, 24

Each adjustment tested in 4 conditions:

1) On-Camera Light On - ISO 320
2) Light On - ISO 1600
3) Light Off - ISO 1600
4) Light Off - ISO 100
-------------------------------------------------------------------------------------------------

Sensor m4 Adjustment 4 Tested with below settings

Set 1) 419
Set 2) 1676
Set 3) 838 (unpatched)

Results:

http://www.jerseyforged.com/sampleclips/m4_adjust4.zip

The setting 419 shows a static picture darkening on the bottom half of screen. Not noticable on chart in below example since it's so bright....

Adjustment4_line.jpg


The 1676 setting showed no detectable difference from unpatched. Video showed no additional irregularies discernable from this test on any patch. Picture darkening was consistent throughout video in first test.

--- Update ---

Testing a Adjustment 4 setting of 209 caused the darkening to occur higher in the screen... 3 quarters up to be exactly.. so the effect is linear like the results in m3 Adjustment 1.

Testing a Adjsutment 4 setting of 0 shows the darkening (or lack of lightening) on the whole image. There's a yellowing as well, but that may be due to the darkening bringing out the color temperature of my background lighting.
 
Last edited:
...
Your text is very uncorrect here. 30min is not related to 4GB limit.
As well as support of SDXC and exFAT do not mean support of files with more than 4Gb file size.
Any porting is, of course, impossible.
I mean with 4GB single file size limit, with typical 17Mbps video bitrate, one single file can only contains about 30min's video clip.

With exFAT, at least you get rid of the hard limit of 4GB single file size, with FAT32 you won't be able to get a single file larger than 4GB.
 
Sensor m4 Adjustment 5 Test

Sensor m4 Adjustment 5 Test

MJPEG Quality Patched -> 384, 330, 300, 276
MJPEG Tables Patched -> 24, 24, 24, 24

Each adjustment tested in 4 conditions:

1) On-Camera Light On - ISO 320
2) Light On - ISO 1600
3) Light Off - ISO 1600
4) Light Off - ISO 100
-------------------------------------------------------------------------------------------------

Sensor m4 Adjustment 5 Tested with below settings

Set 1) 26
Set 2) 78

Results:

http://www.jerseyforged.com/sampleclips/m4_adjust5.zip

No noticable change. No video abnormalies.
 
Sensor m4 Adjustment 6 Test

Sensor m4 Adjustment 6 Test

MJPEG Quality Patched -> 384, 330, 300, 276
MJPEG Tables Patched -> 24, 24, 24, 24

Each adjustment tested in 4 conditions:

1) On-Camera Light On - ISO 320
2) Light On - ISO 1600
3) Light Off - ISO 1600
4) Light Off - ISO 100
-------------------------------------------------------------------------------------------------

Sensor m4 Adjustment 6 Tested with below settings

Set 1) 759
Set 2) 2227

Results:

http://www.jerseyforged.com/sampleclips/m4_adjust6.zip

Set 1 showed a subtle darkening on the right half of the screen. Set 2 showed no apparent change.
 
Vitaliy, did you get ALL the data you needed from that? Finally got my Mini-HDMI cable today. I also have a HDMI capture card for non-HDCP video.. if stills or clips would be in any way useful to any testing.

Yes, it is still useful.
I need reprted resolution and mode (like 1080i60) by TV for all playback modes.
 
Back
Top