GH1 firmware research volunteers required

gf1 test:
1440x1080
quality 256
table 8
420
jpeg analisis:
https://sites.google.com/site/pruebabbbb/temp/P1030646JPG_EQ256_T8.txt
P1030646JPG_EQ256_T8.txt

image:
P1030646.JPG

got more detail here than the avchd "c "setting
recorded 9 sec. on a class 6 after the camera stoped the recording.
 
tester, is it possible to add focus indicator for 3rd parties lens, or say indicate the max contrast during manual focusing.
 
What are the chances of the E-p2 getting a boost in bitrate? It already has full manual controls for video and with in-body IS the advantages for great 720p image is more attractive. I do however understand that the existing hack was built for Panasonic models so the transition is probably possible, just asking. :)
 
how about bypass the lens check? treat all 3rd parties lens as pana product, the camera then we turn the focus ring until match just like AF !! brainstorming........
 
not a crazy request i think.

like 3rd parties battery
just fake the camera believe controlling the len focus (AF), but of course in MF, then focus indicator will work while turn the focus ring, no matter in what mode (face detection, central focus etc).
 
24p native, and "C" settings listed in Ptool. Specifically:

Video Buffer......40.000.000
Video Bitrate.....50.000.000
Overall..............52.000.000
Limiting............60.000.000

Class 6 Transcend card.

Getting some strange anomalies. I'm posting 3 frames as an example. This specific error lasted 9 frames.


Frame 1. It's frame 0/9 of the error. Everything is fine; posting it to give context.
chinup1.png



Frame 2. Frame 1/9 of the error. My talent is moving and he's developed a double-chin -- and I don't mean that he's been eating too much McDonald's! The affected area reaches back to the backpack.
chinup2.png


Frame 3. Frame 9/9. Same area is affected, though the exact pixels have morphed.
chinup3.png


One frame later everything cleared up.

I formatted the card right before shooting, and got no errors from the camera. I'm going to order a class 10 card to be safe, but here we are.
 
24p native, and "C" settings listed in Ptool. Specifically:

Video Buffer......40.000.000
Video Bitrate.....50.000.000
Overall..............52.000.000
Limiting............60.000.000

Class 6 Transcend card.

Getting some strange anomalies. I'm posting 3 frames as an example. This specific error lasted 9 frames.


Frame 1. It's frame 0/9 of the error. Everything is fine; posting it to give context.



Frame 2. Frame 1/9 of the error. My talent is moving and he's developed a double-chin -- and I don't mean that he's been eating too much McDonald's! The affected area reaches back to the backpack.


Frame 3. Frame 9/9. Same area is affected, though the exact pixels have morphed.


One frame later everything cleared up.

I formatted the card right before shooting, and got no errors from the camera. I'm going to order a class 10 card to be safe, but here we are.


This is indicative of the settings not working quite right.
 
Tester13.
Please check out the link below.
http://www.semicon.panasonic.co.jp/e-micom/debugfactory/DFDLBuilder2.php
I downloaded the DebugFactory software from there and it seems that it contains an assembler and CC compiler on a 30 days trial basis.
The program I downloaded was for 103S. They have also an 103L and 103E version.
A documentation PDF file is also there.
Look in the tools folder for the assembler and compiler.

Thanks for your efforts and good luck.
 
tester, is it possible to add focus indicator for 3rd parties lens, or say indicate the max contrast during manual focusing.

Frankly I doubt it is possible with any contrast detection system.
The camera would have to focus the lens in a few steps including past the focus point to select the shot having the best contrast. With legacy lenses the best the camera could do is to tell the user that the focus is getting better or worse.
But the yseer would need to push some button to elicit this response.
 
Check my earler posts with this link :-)
I know you are very busy, but can you try to be less cryptic?
We are all here trying to help you.
So do you still need the assembler and compiler or you are good for 30 days or so?
It looks like Panasonic is selling a 103-based controller board for EEPROM programming.
If need be we can buy that one.

Thanks.
 
I know you are very busy, but can you try to be less cryptic?
We are all here trying to help you.

Sorry, TabletPC and stylus input, you know. Short sentences work best.

So do you still need the assembler and compiler or you are good for 30 days or so? It looks like Panasonic is selling a 103-based controller board for EEPROM programming. If need be we can buy that one.

If you want to buy this board, it can be useful.
As for compilers, 30 days is enough for now.
Full versions cost quite a money.
 
GH1 now, GF1, would G2 be able to be modified?

GH1 now, GF1, would G2 be able to be modified?

It appears the G1, G2, and maybe G10 has nearly the same specs as the GH1 except for Video.

I guess the question now is should I get a GH1 or a GF1 for HD video? The latest I think I see is that the GF1 can do 1080p? Is it the same video output quality as the GH1? Especially the 50mb/s video that just came out is stunning. I'm ready to ditch my Olympus E-P1.
 
Rolling shutter

Rolling shutter

Hi everyone.

While we are experimenting with sensor modes for the MJPEG patch, I am wondering if tester could take a look at sensor speeds from another perspective: Rolling Shutter.

I was thinking about how the rolling shutter issue is effected by the frame rate of the video. In 1080/25p we get massive RS, while in 720/50p the RS is much less pronounced. I am just guessing here, but the RS may be caused by different sensor output speeds. If so, can the 1080/25p upped to 50p sensor speed and drop every second frame?

Maybe we would lose some sensitivity to light as the frames would use a maximum of 1/50 shutter instead of 1/25, but I guess for some of us it would worth it.
 
24p native playback with Audio Encoding bps

24p native playback with Audio Encoding bps

Anyone able to get 24p native playback in conjunction with tweaking the Audio encoding bps? I have tried both PAL/NTSC as well as the range within Audio Encoding Bps- anything but the original default will not allow playback in camera.

Can anyone confirm this?
 
Back
Top