GH1 firmware research volunteers required

Our task is to understand all major encoder parameters. And tune them for best possible result, it is hard, of course. And on much later stage we could try to make build-in procedure that read configuration file from SD card, stores to RAM and allow to set all such things. But it is far, far away.
 
@tester13 Don't you indend to opensource your patching tool and analysis ? It's a pity only you have the information.

Other ppl could help.
 
@tester13 Don't you indend to opensource your patching tool and analysis ? It's a pity only you have the information.

Other ppl could help.

Tester is very careful not to violate any laws.
Therefore he will not publish any copyrighted materials.
He might provide you with tools and links to such diassembly tools.
And that is also the reason how this project is proceeding.
Users are using tools to modify their own firmare.
 
publishing the source of his tools would not violate any laws (at least not more than releasing the binary).
Also I'm not asking him to release the firmware code itself but suggesting that he could release his _analysis_ : i.e. function names and such things
 
tester13, you wanted detailed information regarding video modes: here we go (at least for the EU PAL version)
i selected the different quality setting for AVCHD and made an short clip for each setting, in addition i took the clips from the following posts for comparision:
Chibs 20Mbps bitrate http://www.dvxuser.com/V6/showpost.php?p=1973374&postcount=347
Chibs original bitrate http://www.dvxuser.com/V6/showpost.php?p=1973440&postcount=378
check the attachement for details on average frame sizes, what's strange: Chibs clips have very small I frames, with original settings they are on average smaller than the average P frames?!?
possible settings for shutter speed with normal exposure settings: 30/40/50/60/80/100/125/160/200/250/320/400/500/640/800/1000/1300/1600/2000/2500/3200/4000
with increased EV setting the following shutter speeds are at least displayed on screen: 4/5/6/8/10/13/15/20/25

PS: file type is csv (which is not an allowed filetype :()
 

Attachments

K.S.

Thanks for your effort.
I'll try to look closely at all this.

But I need similar data for NTSC streams.
It look like I have some idea here.
 
Last edited:
Thanks.

PTool 3.07 is released.
GOP size (one I + P frames number) adjustment for all HD resolutions added.

K.S. - you can test various GOP sizes now and see if it improves things (as 720p have much higher GOP size). It is interesting is 1 will work and result in I frames only, or we have some restrictions.

Please note, that GOP sizes are also automatically changed to proper values
by" 60i wrapper" and "59,94->29,97 patches".
So, do not use GOP adjustment if this patches are checked (NTSC only).
 
Testing again 3.06 ver.:

This set combination don't work (freezing again).

Change one thing at a time.
a) Set
VA param 1 = 6
VA param 5 = 7


This set mus be: (less too bad)

VA param 1 = 5
VA param 5 = 5

And next step:

b) Next, set Bitrates as follows
Top Limit - checked
Bitrate 1 - around 10
Bitrate 2 - around 8


Media info show that:

FHD mode

General
ID : 0
Complete name : E:\PRIVATE\AVCHD\BDMV\STREAM\00011.MTS
Format : BDAV
Format/Info : Blu-ray Video
File size : 63.9 MiB
Duration : 1mn 0s
Overall bit rate : 8 808 Kbps
Maximum Overall bit rate : 10.7 Mbps

Video
ID : 4113 (0x1011)
Menu ID : 1 (0x1)
Format : AVC
Format/Info : Advanced Video Codec
Format profile : High@L4.0
Format settings, CABAC : No
Format settings, ReFrames : 2 frames
Duration : 1mn 0s
Bit rate mode : Variable
Bit rate : 8 259 Kbps
Maximum bit rate : 16.6 Mbps
Width : 1 920 pixels
Height : 1 080 pixels
Display aspect ratio : 16:9
Frame rate : 25.000 fps
Standard : NTSC
Resolution : 8 bits
Colorimetry : 4:2:0
Scan type : Interlaced
Scan order : Top Field First
Bits/(Pixel*Frame) : 0.159
Stream size : 59.9 MiB (94%)

SHD mode

General
ID : 0
Complete name : E:\PRIVATE\AVCHD\BDMV\STREAM\00010.MTS
Format : BDAV
Format/Info : Blu-ray Video
File size : 65.9 MiB
Duration : 1mn 0s
Overall bit rate : 9 090 Kbps
Maximum Overall bit rate : 10.7 Mbps

Video
ID : 4113 (0x1011)
Menu ID : 1 (0x1)
Format : AVC
Format/Info : Advanced Video Codec
Format profile : High@L4.0
Format settings, CABAC : No
Format settings, ReFrames : 1 frame
Duration : 1mn 0s
Bit rate mode : Variable
Bit rate : 8 530 Kbps
Maximum bit rate : 16.6 Mbps
Width : 1 280 pixels
Height : 720 pixels
Display aspect ratio : 16:9
Frame rate : 50.000 fps
Original frame rate : 100.000 fps
Standard : NTSC
Resolution : 8 bits
Colorimetry : 4:2:0
Scan type : Progressive
Bits/(Pixel*Frame) : 0.185
Stream size : 61.8 MiB (94%)
 
Looks like bitrates dropped according to setting.
Next time, please post only relevant info, as it is very long and hard to read for people.
 
hey, you mentioned something about the e-p1... where can I find that?

Thx

I've been looking at the E-P1 firmware (with tester13's help), but so far we only have a tool to decrypt and re-encrypt Olympus E-series firmwares.
If anyone feels like having a go at analyzing the disassembly, I'd be more than happy to send this tool.
However for regular users it is in nowhere near a usable state:
- No meaningful modification/hack has been made so far.
- There currently is no straightforward way to actually flash the camera with modified firmwares.
 
ai_torito

Very glad to see you here.

You need to make research, and E-P1 firmware is very good in this respect, much simpler to reverse.
 
More test result:

VA 720p GOP Size: 26 -> 52 (all right 'Bits/(Pixel*Frame) : 0.179 ') -> 13 (all right Bits/(Pixel*Frame) : 0.300 ').
VA 1080p GOP Size: 13 -> 26 (all right 'Bits/(Pixel*Frame) : 0.152 ') -> 7 (stop rec on 20 sec. 'Bits/(Pixel*Frame) : 0.279 ').

More results will be soon
 
Perfect.

It is interesting to compare famous mud.
Longer GOP must reduce some mud, especially with slightly upped bitrate.
Like 1080p25 21Mbps 26 GOP. As compression efficiency doubles + 15% bitrate increase .
Only if this smart guys didn't reduce bitrate automatically due to VBR thing.
Getting rid of this VBR could be good also, or at least learn to adjust it.
 
Back
Top