SCENE FILES: FOr HMC 152EN

Desertfox

Desertfox

Active member
Hello fellow HCM users.

I'm using an HMC 152EN (Asian Code) I've been trying to copy the scene files from all suggested HMC 150 post to no avail. Probably due to different frequency? Or I just have no idea on how I'm suppose to copy the files!?!

Despite my failure, I tried to edit Scene configuration manually and found out that the maximum numbers I could push up is at ( 7 ). Where else, you guys using HMC 150/1 are able to put in 8 for detail level, V detail level etc..etc

Example.
<F6>
SCENE NAME:CINE D ; NAME EDIT
00003001: 8 ; DETAIL LEVEL
00003002: 8 ; V DETAIL LEVEL
00003003: 8 ; DETAIL CORING

My question is, is there anyone using my version of HMC 152EN and encounter complications when it comes to using these scene files?
__________________
 
Fox of the desert you can only go up to seven or minus seven with the detail settings .

Your right Averan, shoot me
 
Last edited:
i thought it was +7 or -7 from a neutral 0.

as i've found through experimentation, you probably don't really want to be at the max of any setting anyway. ;)
 
The menu settings in-camera are -7 to +7. But in the actual scene file, negative numbers aren't possible, so the range is given as 0 to 15, with the midpoint being 8.
 
Thank you guys for the prompt reply.

Yes the menu setting for my HCM 152En is -7 to +7.

Barry, are you saying that it is possible for me to just Load the .txt file even though manually, I am not able to set a range from 0 to 15?

Below is a .txt file which I would really like to use. Have a feeling I need to change the (SYSTEM FREQ:59.94Hz) or something else in order for me to load and utilise this file.

Ver 1.00-00
AG-HMC150
SYSTEM FREQ:59.94Hz
TITLE: CITI
<F1>
SCENE NAME: CITI; NAME EDIT
00003001: 8 ; DETAIL LEVEL
00003002: 8 ; V DETAIL LEVEL
00003003: 8 ; DETAIL CORING
00003004: 8 ; CHROMA LEVEL
00003005: 1 ; CHROMA PHASE
00003006: 14 ; COLOR TEMP Ach
00003007: 15 ; COLOR TEMP Bch
00003009: 78 ; MASTER PED
0000300a: 9 ; A IRIS LEVEL
0000300b: 0 ; DRS
0000300c: 6 ; GAMMA
0000300d: 0 ; KNEE
0000300e: 2 ; MATRIX
0000300f: 1 ; SKIN TONE DTL
00003011: 702 ; SYNCRO SCAN
 
On that camera you'd have to change it to AG-HMC152EN.

Save some scene files from your camera onto an SD card, and examine the first few lines, and make sure that they match any files you're trying to import.
 
fyi

00003001: 8 ; DETAIL LEVEL = +0
00003002: 8 ; V DETAIL LEVEL = +0
00003003: 8 ; DETAIL CORING = +0
00003004: 8 ; CHROMA LEVEL = +0
00003005: 1 ; CHROMA PHASE = -7
00003006: 14 ; COLOR TEMP Ach = +6
00003007: 15 ; COLOR TEMP Bch = +7
00003009: 78 ; MASTER PED = -50
0000300a: 9 ; A IRIS LEVEL = -7
0000300b: 0 ; DRS = off
0000300c: 6 ; GAMMA = cine-v
0000300d: 0 ; KNEE = auto
0000300e: 2 ; MATRIX = uh, i don't remember...=)
0000300f: 1 ; SKIN TONE DTL = on
 
hello to all,
sorry for my English is not good.
I would like to know how scene file used.
c'e 'qualche good document that explains when to use a certain type of scene file according to certain shooting conditions video?
bye bye marco
 
You must log in or register to reply here.
Back
Top