There's allegedly - at least, it was patented - a 24-70 F2.8 CN-E lens due to be announced at some point.... EF mount native - perfect for CN-E primes...
PS. IMO, addressing someone personally outside of the topic at hand is a bit uncouth.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
There's allegedly - at least, it was patented - a 24-70 F2.8 CN-E lens due to be announced at some point.... EF mount native - perfect for CN-E primes...
This is not true.And colour science? The whole point about RAW is that the camera doesn't contribute to the colour science! That's the whole point of RAW! You're recording the direct values from the photosites - bypassing all the "secret sauce" that might be claimed to give any mojo to a camera. All that's left is the sensor filtration and the silicon characteristics. Silicon is silicon, and the Bayer spectral filtration characteristics need to be pretty defined.
The moment you move to RAW, "mojo" moves from hardware to software.
The ONLY thing that RAW truly means is "not debarred". Everything else is up for grabs, and trust me as one who would know, EVERY manufacturer does something to the pure data that comes off the sensor block. Every. Single. One. And they each do different stuff. There are more things on heaven & earth than are dreamt of in your philosophies.
But surely most of what may be considered the colour science of the camera - it's "mojo" - comes after deBayering? Things such as colour matrixing, flare correction, gamma adjustment, DR handling (knee factors), edge enhancement, most noise reduction, let alone gain and colour gain (white balance)? I don't see that leaves a lot in the "everything else" category....? Yes, manufacturers do things to the pure data off the sensor, but my understanding is they were largely such as fixed pattern noise reduction, dead pixel concealment, analogue gain, and such as bit depth reduction to 10/12 bit, and/or basic compression (hopefully lossless or quasi-lossless). But by and large, such won't affect any "look" of the final picture.This is not true.
The ONLY thing that RAW truly means is "not debarred". Everything else is up for grabs, .......
But is there anything the cameras do to raw that falls outside one of these actions:
- add or subtract red, blue, or green to a pixel
- raise or lower the brightness of a pixel
- take away noise (or perhaps inadvertently add it)
Is there anything they do that cannot be compensated for in a color correction program?
I see as much variance among footage from different shooters with the same camera as I do from different cameras. And the night-and-day difference after a LUT is applied tells me that few modern cameras are so far apart that they cannot be adequately matched or that a camera's default color should be the main reason you pick it.
Yes, but when the wind is southerly, I know a hawk from a handsaw.
It's true, you cannot take the raw from a Sony camera and the Digital Bolex, apply the same LUT, and expect identical imagery. But is there anything the cameras do to raw that falls outside one of these actions:
- add or subtract red, blue, or green to a pixel
- raise or lower the brightness of a pixel
- take away noise (or perhaps inadvertently add it)
Is there anything they do that cannot be compensated for in a color correction program?
I see as much variance among footage from different shooters with the same camera as I do from different cameras. And the night-and-day difference after a LUT is applied tells me that few modern cameras are so far apart that they cannot be adequately matched or that a camera's default color should be the main reason you pick it.
I know about the "you can't compare different classes" mantra and ergonomics come into play a lot, but with all of the hoopla over these $20,000+ cameras and their releases, I am just not seeing the image quality benefits in the end product. I guess the era of being blown away by footage is over.
IMO, this is sort of an ACES thing - do you make the final "print" for your basic 1080p monitor or for a tablet/iPhone or for a 4K HDR set or whatever. It's like an audio engineer has to decide whether he is going to mix his track for a $100,000 state-of-the-art system or a boombox. As the video technology goes forward, it's more likely than not to be mixed for an HDR 4K set.Regarding the "First Footage" posted by Alohype, I would say we are pushing the limits of display technology and up against a wall for new cameras. The footage looks very nice but not anything better than many other cameras viewed through the same medium. My laptop has a very nice 1080p screen and the images were sharp and detailed but the highlights looked a bit strained to me. Maybe this would look different if a high dynamic range screen was involved, but that is really not in the mix for the majority of consumption...
I'm talking just about whatever it is people mean when they say "color science" and "mojo." I don't like those phrases, because really all it is, I think, most of the time, is contrast curves and coloring (again for two cameras with the same dynamic range and noise floors), and a lot of that goes out the window when you shoot in log or raw or both.
Regarding the "First Footage" posted by Alohype, I would say we are pushing the limits of display technology and up against a wall for new cameras. The footage looks very nice but not anything better than many other cameras viewed through the same medium. My laptop has a very nice 1080p screen and the images were sharp and detailed but the highlights looked a bit strained to me. Maybe this would look different if a high dynamic range screen was involved, but that is really not in the mix for the majority of consumption.
This footage looked very much like a Varicam. Panasonic has retained their look over the years. Kind of like a cleaner "Planet Earth" with more detail and less DOF. But I have to wonder about the worth of these level cameras outside of special viewing circumstances. Line up an RX10II, a GH4, an Fs5, an F7, a RED anything, a C300II, a Varicam etc... and have them all shoot in 4k. If 1080p or under is the delivery medium, at what point does the more expensive image become necessary?
I know about the "you can't compare different classes" mantra and ergonomics come into play a lot, but with all of the hoopla over these $20,000+ cameras and their releases, I am just not seeing the image quality benefits in the end product. I guess the era of being blown away by footage is over.
As I said, I'm under NDA to several manufacturers. Some legal contracts, some just common courtesy.There is a lot of "You're wrong, there's much more than that" but then no details.
Most cameras can make a pretty picture - even gh4 or whatever - but only a few cameras can make a pretty picture once the scene is stressed - bright backlit midday or maybe under the light of a match or a new moon.
Interestingly the vari35 reel was exceptional
This footage did not blow me away at all so a bit of a fail by panny to not pick the right subject, Dp, or something. We do not see the camera pushed.