Panasonic NAB 2011 Press Conference LIVE Coverage

Okay, I'm stationed in the press conference, waiting for it to start. I've got Luis Caffesse and Stephen Mick on my right, and Mikko Wilson and Jake Carpenter on my left... press conference starts in five minutes.
 
Last edited:
Any word on low light sensitivity, latitude etc? Never been a fan of CMOS but looks like everything has gone that way. RIP CCD. <cue funeral music>
 
Jan,

Just curious...What's the technical reason behind that? Why can AVCCAM have the capability of 1080/60p VFR and not AVC-Intra? Thanks!

I'm sure it's so you have to buy both or buy one and rent the other when needed. No company want's to make a camera that does everything, otherwise what will they sell next year? They all want to keep us just happy enough to buy, but keep us wanting more to buy the next model. It's the nature of business.
 
Jan,

Just curious...What's the technical reason behind that? Why can AVCCAM have the capability of 1080/60p VFR and not AVC-Intra? Thanks!

I'm guessing it's because 10-bit 4:2:2 is a lot more data to process than 8-bit 4:2:0.
 
I'm guessing it's because 10-bit 4:2:2 is a lot more data to process than 8-bit 4:2:0.

The RAW signal from the sensor digitizes to an uncompressed 422 stream that then gets compressed, so I believe it's actually it's the opposite. Someone correct me if I'm wrong.
 
The RAW signal from the sensor digitizes to an uncompressed 422 stream that then gets compressed, so I believe it's actually it's the opposite. Someone correct me if I'm wrong.

The AVC version of the camera is still going to be working with an 8-bit image as opposed to the P2 version's 10-bit...i.e. the AF100 only does 8-bit out the HD-SDI indicating that whatever image it ends up with internally is 8-bit, whereas in the HPX370 and HPX 250 that use 10-bit AVC-I, the HD-SDI out is 10-bit. So what it boils down to is 10-bit is a lot more data than 8-bit, and is probably what limits the 10-bit cameras from doing 1080 60p.
 
The AVC version of the camera is still going to be working with an 8-bit image as opposed to the P2 version's 10-bit...i.e. the AF100 only does 8-bit out the HD-SDI indicating that whatever image it ends up with internally is 8-bit, whereas in the HPX370 and HPX 250 that use 10-bit AVC-I, the HD-SDI out is 10-bit. So what it boils down to is 10-bit is a lot more data than 8-bit, and is probably what limits the 10-bit cameras from doing 1080 60p.

Good point. I wonder if that is enough to offset the heavy compression of AVCHD tho.
 
Good point. I wonder if that is enough to offset the heavy compression of AVCHD tho.

Currently the "heavy comprression" of AVCHD handles the 60 Frames just fine in the AF100. And I wouldn't call it heayvy, I would call it elegant and efficient. Go look at the scenes in the Verse before dying. The reason that the 250 doesn't do 60 in 1080 is the the bits at 100Mbs becomes too much to handle. It is not whether it is 10 bits ot 80 bits in the codec, it is because signal is just too big too handle in the AVC-Intra. Easier when the Mbs is smaller.
 
Currently the "heavy comprression" of AVCHD handles the 60 Frames just fine in the AF100. And I wouldn't call it heayvy, I would call it elegant and efficient. Go look at the scenes in the Verse before dying. The reason that the 250 doesn't do 60 in 1080 is the the bits at 100Mbs becomes too much to handle. It is not whether it is 10 bits ot 80 bits in the codec, it is because signal is just too big too handle in the AVC-Intra. Easier when the Mbs is smaller.

Sorry Jan I didn't mean "heavy" as in bad by any means. I am very happy with my AF100, I was just saying 24mbps is quite a big difference from uncompressed compared to the 100Mbps AVC-I. Didn't mean to offend.

Now as for your explanation, that makes perfect sense. Thanks for the explanation Jan.
 
Thanks for explaining your reference. Keep in mind that in 10 bit HD, the compression is against a 1.2 GBs signal. In 8bit it is 994Mbs. So the AVC compression family is probably the most elegant way of getting signals smaller. Eventually we will have chips that are big enough and small enough to fit into a camera, to do the job but we aren't there just yet. Think about the fact that the AF100 is the first AVCCAM camera to do Variable Frame Rate. It is a pretty good trick. Couldn't do it at the birth of the HMC150. So the end result is that we just can't do this today but technology marches on.

Best,

jan
 
I'm sure the technology is there, just at too high of a cost to the consumer. I mean if Panasonic only made super expencive perfect AVC-Elite cameras with 6 figure bitrates and sensors so sensitive you can see if there are ghosts in the shot, Panasonic would go out of business. Although I would like to see the camera. Maybe I could use it to see grandpa.
 
Back
Top