Sensor m4 Adjustment 7 Test
Sensor m4 Adjustment 7 Test
MJPEG Quality Patched -> 384, 330, 300, 276
MJPEG Tables Patched -> 24, 24, 24, 24
Each adjustment tested in 4 conditions:
1) On-Camera Light On - ISO 320
2) Light On - ISO 1600
3) Light Off - ISO 1600
4) Light Off - ISO 100
-------------------------------------------------------------------------------------------------
Sensor m4 Adjustment 7 Tested with below settings
Set 1) 2200 (50% of normal)
Set 2) 6600 (150% of normal)
Set 3) 17600 (4x normal)
Results:
http://www.jerseyforged.com/sampleclips/m4_adjust7.zip
Set 1's settings seems to squeeze (not crop) the image to the upper portion of the screen... making the image roughly 442 pixels high and leaving a stripped pattern in the remainder of the screen. Where the pattern begins isn't at a constant pixel height as the border seems to bend upwards several pixels in the middle. The pattern is relatively static, with the exception of a slight side to size shake. Set 3's setting gives nearly identically results as set 1, except there's slightly less shake at the bottom.
Here's a reformatted video clip from set 1 -> http://www.jerseyforged.com/sampleclips/adjust7_clip.zip
Set 2's setting has an entirely different effect. The image is shifted (not squeezed) to the left by roughly about 311 pixels. Once again the image border has a curve. Furthemore, no diagonal stripes are present, but there's a white stripe at the border with the rest of image being black. The left side of the image is pushed off the side of the screen. The video shows these artifacts to be entirely static.. with no subtle shake as preset in 1 and 3.
In both cases you seem to see a bit more of the image at the border then you normally would. In the shifted image you can see much more of a stack of VHS in the room (on the upper right next to the can and yogurt). On the squeezed image you can see make out more of my nerdhood on the box below the test chart.
Sensor m4 Adjustment 7 Test
MJPEG Quality Patched -> 384, 330, 300, 276
MJPEG Tables Patched -> 24, 24, 24, 24
Each adjustment tested in 4 conditions:
1) On-Camera Light On - ISO 320
2) Light On - ISO 1600
3) Light Off - ISO 1600
4) Light Off - ISO 100
-------------------------------------------------------------------------------------------------
Sensor m4 Adjustment 7 Tested with below settings
Set 1) 2200 (50% of normal)
Set 2) 6600 (150% of normal)
Set 3) 17600 (4x normal)
Results:
http://www.jerseyforged.com/sampleclips/m4_adjust7.zip
Set 1's settings seems to squeeze (not crop) the image to the upper portion of the screen... making the image roughly 442 pixels high and leaving a stripped pattern in the remainder of the screen. Where the pattern begins isn't at a constant pixel height as the border seems to bend upwards several pixels in the middle. The pattern is relatively static, with the exception of a slight side to size shake. Set 3's setting gives nearly identically results as set 1, except there's slightly less shake at the bottom.
Here's a reformatted video clip from set 1 -> http://www.jerseyforged.com/sampleclips/adjust7_clip.zip
Set 2's setting has an entirely different effect. The image is shifted (not squeezed) to the left by roughly about 311 pixels. Once again the image border has a curve. Furthemore, no diagonal stripes are present, but there's a white stripe at the border with the rest of image being black. The left side of the image is pushed off the side of the screen. The video shows these artifacts to be entirely static.. with no subtle shake as preset in 1 and 3.
In both cases you seem to see a bit more of the image at the border then you normally would. In the shifted image you can see much more of a stack of VHS in the room (on the upper right next to the can and yogurt). On the squeezed image you can see make out more of my nerdhood on the box below the test chart.