GH1 firmware research volunteers required

Thanks. That's fair enough. I'm fairly comfortable with assembler and disassembling (though not MN103), and yeah I've run ptools on the firmware I have under wine, but I'd have to find an equivalent unix debugger to make use of it, or try IDA.

Actually IDA seems to work on wine as well, so I'll look into that first.
 
Thanks. That's fair enough. I'm fairly comfortable with assembler and disassembling (though not MN103), and yeah I've run ptools on the firmware I have under wine, but I'd have to find an equivalent unix debugger to make use of it, or try IDA.

Actually IDA seems to work on wine as well, so I'll look into that first.

In fact you won't be able to debug anything. :-)
Just passive disassembling.
And no IDA alternative exists in this world.
 
Last edited:
thanks for the project , I have a gh1 in the box due to the mud, gh1 cannot be used professionally cause of the bad codec, we can deal with everything else (audio,pulldown,etc) , so I think the main effort should be clean hdmi out or improved bitrate.I'm willing to donate $50 or even $100 to this.

Just an idea about bitrates, gh1 uses 17mbps without b-rames, so increasing it to 24mbps wouldn't help too much, to get enough quality it should be close to the 7d 40mbps also without b-frames.

The bitrate is fixed to 17mbps, in 1080 there are 24 1920x1080 frames to compress, in 720 there are 60 1280x720 frames to compress, this means , averaging about 30kb per 720p frame and 70kb per 1080p frame.

If a special mode 720p24 could be set, then there is a chance that the codec automatically could deal with the new fps and then average 70kb per 720p frame, this would mean a equivalent visual quality of more than 35mbps in 1280x720. Probably enough to get the mud out!!
 
Maybe you can make a bin file for us to download and try?

I added BAT files to ptool distribution for completely inexpirienced users.

Read my first post in this thread for detailed instructions and Panasonic firmware link.
 
Last edited:
thanks for the project , I have a gh1 in the box due to the mud, gh1 cannot be used professionally cause of the bad codec, we can deal with everything else (audio,pulldown,etc) , so I think the main effort should be clean hdmi out or improved bitrate.I'm willing to donate $50 or even $100 to this.
If a special mode 720p24 could be set, then there is a chance that the codec automatically could deal with the new fps and then average 70kb per 720p frame, this would mean a equivalent visual quality of more than 35mbps in 1280x720. Probably enough to get the mud out!!

As for donation, I still waiting for someone with good reputation here to make simple page and provide his PayPal account for donations.
I bought gh1-hack.info domain today, so as this guy become known, I'll make special donation page as the front page of this site .

As for bitrate, I believe that coder have following settings : frame size, reccomended bitrate, hardcoded maximum bitrate setting, and frame rate.
We just don't know if hardware is capable of 720p24 in high bitrate, or any other low level changes are required.
 
Last edited:
Added 50,60fps->24fps patch to V1.20 ptool.
So, it'll be more interesting for early testers.
As I said early, most probably firmware update won't work.
But we must be sure and must know error messages.
For guys wanting to test 24fps, most useful must be make_fps2.bat, but it is better to start from make1.bat version to make it risk free.
 
Added 50,60fps->24fps patch to V1.20 ptool.
So, it'll be more interesting for early testers.
As I said early, most probably firmware update won't work.
But we must be sure and must know error messages.
For guys wanting to test 24fps, most useful must be make_fps2.bat, but it is better to start from make1.bat version to make it risk free.


Wait...are you saying that you may've cracked native 24p recording? But you need first firmare version to try?
 
So if I understand correctly, you have made a firmware that would allow 720/24 recording, and you just need someone to try the firmware as per instructions on the first page of the thread?
 
So if I understand correctly, you have made a firmware that would allow 720/24 recording, and you just need someone to try the firmware as per instructions on the first page of the thread?

Yes :-)
But with very high probaility updater will reject this firmware.
If not, it must work.
If it rejects it, I must know how it looks.
 
Hi tester13'

I did it for make1.bat - result, camera don't see firmware on the card.

I think the best choice it's a waiting official firmware and will see difference on those version.

Regards
NURBS
 
Hi tester13'

I did it for make1.bat - result, camera don't see firmware on the card.

I think the best choice it's a waiting official firmware and will see difference on those version.

Regards
NURBS

Use either make3.bat or make_fps2.bat as they also change internal version number to 1.13. I believe it actually check it.
Check if it could see it.
 
Yes :-)
But with very high probaility updater will reject this firmware.
If not, it must work.
If it rejects it, I must know how it looks.

I think many of us (I am any way) are just new to the whole process. The code makes no sense to me (I only dabbled in visual basic :cheesy:) and I know no one wants to screw up their camera.

If you can say that you are reasonably sure that the update will not render my camera inoperable, I may be willing to try.
 
In current state we just try to make and update and allow camera to see it.

Even previous post about camera ignoring file made with make1.bat allowed me to already find direct version check. And as I already said checked version value is patched if used make3.bat or make_fps2.bat

for blazer003 :
I am completely open about that I am doing.
For example, make_fps2.bat only changes three bytes containing version number (this is just constants) and change two other constants to be equal to 24. I don't see how this could break your camera. I did not touch any code, so, minimal risk here.
 
Last edited:
Same result, camera don't see any new firmware.

You must see something more.. Do IT ;)

Regards
NURBS
 
Back
Top