GH1 firmware research volunteers required

If these elevated MJPEG bitrates can eventually be used at 24-25 fps (without frame skipping) it would be so satisfying! And if it were also possible to change MJPEG frame to size to 1080 it would make it even more usable. Very encouraging, thanks.

Yeah, fantasy is good.
 
Small tests update.

Generally 1080p MJPEG is possible.
1920p30 stops after few seconds.
1920p24 runs as long as necessary (same bitrate as 1280).
File is pretty ok and playable.
But picture is awful green-magenta nightmare with artefacts.
So, MJPEG encoder works ok.
But all sensor setup and may be buffers are problematic.
 
My tests show that result:

MJPEG tests - Part 2. (static picture)

MJPEG Quality: 256
MJPEG Table: 266


Duration : 10s 0ms
Bit rate : 41.9 Mbps
Frame rate : 30.000 fps
Bits/(Pixel*Frame) : 1.517

If don't turn on MJPEG table, bitrate been less.

Regards
NuRBS
 
My tests show that result:

MJPEG tests - Part 2. (static picture)

MJPEG Quality: 256
MJPEG Table: 266

Duration : 10s 0ms
Bit rate : 41.9 Mbps
Frame rate : 30.000 fps
Bits/(Pixel*Frame) : 1.517

If don't turn on MJPEG table, bitrate been less.

Thanks.
I believe that table index (note - this is index in table of values!) drives estimator behaviour.
And quality sets maximum bitrate.
Shoot some detailed scene, I got jump from 30Mbps static simple scene to high detailed trees scene at 57Mbps with some fragments at 63Mbps.
 
Tester13,

Is it possible for you to disable certain features in the camera like internal sound to reserve processing power for other features? Like improving the codec?
 
Tester13,
Is it possible for you to disable certain features in the camera like internal sound to reserve processing power for other features? Like improving the codec?

:-)
Almost all features are implemented in hardware.
CPU in LSI only sets certain parameters of other hardware parts. :-)
So, it won't help.
 
I made small research and we have some parts already implemented - we can use playback audio level as control to set our level and we also have necessary small icons that can be taken from audio dubbing screen.

What are playback audio levels? What do you intend to do with the icons? Could you please be more precise on this?

Thanks
btw: i begin to love your mjpeg
 
Very interesting thing.

Setting 'MJPEG Table:' have direct influence for MJPEG thumbnail picture.

MJPEG Table: 1 -> 500kb
MJPEG Table: 128 -> 146kb
MJPEG Table: 1024 -> 60kb

;)

Regards
NURBS
 

Attachments

  • P1000784.JPG
    P1000784.JPG
    63 KB · Views: 0
  • P1000786.JPG
    P1000786.JPG
    143.5 KB · Views: 0
  • P1000790.jpg
    P1000790.jpg
    85.7 KB · Views: 0
Very interesting thing.

Setting 'MJPEG Table:' have direct influence for MJPEG thumbnail picture.

MJPEG Table: 1 -> 500kb
MJPEG Table: 128 -> 146kb
MJPEG Table: 1024 -> 60kb

Interesting.
Quality also affects thumbnail size btw.
Top table have only 1/5 compression ratio.
 
DVX forum script compress 500kb image to 80kb :-) but 146kb and 64kb is original.

Do not use attachments as they are invisible to non-members.
Use member upload center (red icon to the right) and insert provided link in message text.
It also won't touch your images.
 
crazy difference in image quality! are those uploads screengrabs from the video or thumbnails of it?
 
Last edited:
PTool 3.31 Released
MJPEG compression patches added.
MJPEG 1920 patch added, just for fun (very weird picture!).

This release allow you to precisely set MJPEG bitrate, for high detailed scenes, for average and for low detailed. Maximum normal working bitrate is at least 63Mbit/sec.
But you need Sandisk or good Class 10 card.

Note to testers is on first page - second post.
Table values can be also found at the end for second post.

P.S. We are now most popular thread in DSLR section and second or third on whole forum.
 
I hope you (Tester13) have some Google Analytics on your own website to see how often Panny is actually checking on your progress :)

Keep up the good work!!

It's hard for me to tell how promising the MJPEG is looking -- can someone who understands what we might be realistically hoping for shed some perspective?

In other words, is tester13 close to some major breakthrough with the MJPEG progress?

This is the only thread I read every day (5x-10x)...

Nice work guys!
 
It's hard for me to tell how promising the MJPEG is looking -- can someone who understands what we might be realistically hoping for shed some perspective?

MJPEG patches are already pretty usable.
For example, checking only E1 Quality and set it to 256 give you about 57Mbps bitrate at high detailed scenes (and I don't see any JPEG artefacts).

Here is my last test quality settings, working ok (average low detail bitrate was about 35Mbit):
Quality settings (E1 to E4) - 0x160, 0xDC, 0xC8, 0xB8
Table settings (E1 to E4) - 70, 40, 133, 120,

But we need many testers to understand how estimator works.
 
For same 'tester13' sttings I have: (static scene in all video same).

Bit rate : 43.1 Mbps
Frame rate : 30.000 fps
Bits/(Pixel*Frame) : 1.558

Next test:

Quality settings (E1 to E4) - 256, 220, 200, 184
Table settings (E1 to E4) - 233, 292, 300, 310

Bit rate : 13.0 Mbps
Frame rate : 30.000 fps
Bits/(Pixel*Frame) : 0.471

Quality settings (E1 to E4) - 352, 220, 200, 184
Table settings (E1 to E4) - 70, 70, 80, 70

Bit rate : 29.4 Mbps
Frame rate : 30.000 fps
Bits/(Pixel*Frame) : 1.063

Quality settings (E1 to E4) - 352, 220, 200, 184
Table settings (E1 to E4) - 70, 32, 32, 32

Bit rate : 45.5 Mbps
Frame rate : 30.000 fps
Bits/(Pixel*Frame) : 1.646

Quality settings (E1 to E4) - 352, 220, 200, 184
Table settings (E1 to E4) - 32, 24, 24, 24

Bit rate : 54.0 Mbps
Frame rate : 30.000 fps
Bits/(Pixel*Frame) : 1.955

Quality settings (E1 to E4) - 352, 220, 200, 184
Table settings (E1 to E4) - 24, 12, 12, 12

Bit rate : 44.6 Mbps
Frame rate : 30.000 fps
Bits/(Pixel*Frame) : 1.613

Quality settings (E1 to E4) - 352, 220, 200, 184
Table settings (E1 to E4) - 24, 24, 24, 24


Bit rate : 54.5 Mbps - Wow!
Frame rate : 30.000 fps
Bits/(Pixel*Frame) : 1.971

I can't testing 1920 mode setting, because don't have fast card.
 

Attachments

  • P1010037.JPG
    P1010037.JPG
    150 KB · Views: 0
Last edited:
I can't testing 1920 mode setting, because don't have fast card.

Go and by good fast card. Transcent Class 10 is quite cheap and looks good.

1920 mode do not require fast card (with defailt MJPEG settings, you can further decrease quality, btw), but must be used with 30-24fps patch.
Image is really weird magenta-green and distored.
Whole patch purpose was to prove that MJPEG encoder is capable to produce 1080p24.

And look at actual table values (see my second post at first page).
 
Back
Top