GH1 firmware research volunteers required

Thank you for your great works.
I found a problem after hacked the firmware by using 3.40d: after hacked the firmware, language option not work for original Japanese GH1 model, as no language menu appeared in menu setting and the langauage can only be shown in Japanese.

First, this is development thread.
Second, you are first one reporting about this for long time.
I don't have Japanese GH1, but Japanese G1 works fine as well as normal GH1.
To conclude. You are doing something wrong.
 
First, this is development thread.
Second, you are first one reporting about this for long time.
I don't have Japanese GH1, but Japanese G1 works fine as well as normal GH1.
To conclude. You are doing something wrong.


Thanks... Will check it again on my Japanese GH1,
 
PTool 3.40d updated

GF1
Added "Manual movie modes (old version)" patch (by request).
Added "Version patch for v1.24" (this is totally untested, must be used alone by owners of cameras with v1.24 firmware!)

GH1
Added "Movie format error" patch. (removes error if you try to record PAL footage on NTSC card).

Added "Lens mount flag" patch (prevents Lens not mounted errors).
Added "External microphone" patch (makes camera think that external mic is attached, useful then external mic is used with remote shutter).
Last two patches are risky patches (system routines called before any interface), so, I warned you. But we need to know how they work to go further.
 
Last edited:
PTool 3.40d updated

GF1
Added "Manual movie modes (old version)" patch (by request).
Added "Version patch for v1.24" (this is totally untested, must be used alone by owners of cameras with v1.24 firmware!)

GH1
Added "Movie format error" patch. (removes error if you try to record PAL footage on NTSC card).

Added "Lens mount flag" patch (prevents Lens not mounted errors).
Added "External microphone" patch (makes camera think that external mic is attached, useful then external mic is used with remote shutter).
Last two patches are very risky patches. First one just risky :-)

Thank you. Those are some great features.
 
PTool 3.40d updated
Added "External microphone" patch (makes camera think that external mic is attached, useful then external mic is used with remote shutter).

This is very interesting! Some time ago I was wondering if something like that is possible. :)

I would just like to ask you something. Is it possible to distinguish PTool releases by numbers (e.g. PTool 3.41)? Namely, it's not easy to refer to which version are we talking about in some threads.
 
PTool 3.40d updated

GF1
Added "Manual movie modes (old version)" patch (by request).
Added "Version patch for v1.24" (this is totally untested, must be used alone by owners of cameras with v1.24 firmware!)


Tried the "Version patch for v1.24" without any other paches selected. Unfortunately the firmware it wasn't recognized by the camera as usual (see my camera details in my signature).

Thanks for working on this problem.

BTW: Another poster in the general "GF1 GH1 Hack problem thread" mentions a GF1__123.bin available from Panasonic France - has that been investigated?
Link to thread
 
PTool 3.40d updated

General
Release build date present in window caption.
Added short message that suggest to store settings first for empty settings slots.

GH1
Added "MJPEG Playback error" patch. Then playing high bitrate MJPEG movies you see read error message and playback stops. Now it must just stop without any error message :-) So, it is not solution of MJPEG playback problem. Not yet.

P.S. I need test reports for latest patches.
 
PTool 3.40d updated, yet again

GH1
Modified "AVCHD 1080p24/25->720p24/25" patch. I hope that changes allow to get proper 720p frame (not cut out one as before).
Added "MJPEG Playback error 2" patch. Read description of first version. Try each one separately end report one that works.

Want to remind that without your reports we won't get any progress.
 
Tried both MJPEG Playback Error 2 patches.

First one: Didn't get error but file didn't play.

Second one: "Read Error Please Check The Card."
 
Tried both MJPEG Playback Error 2 patches.

First one: Didn't get error but file didn't play.

Second one: "Read Error Please Check The Card."

Yes, it won't play, but error must be gone.

Can you try MJPEG with good start part (low detail), so we can see stop in process.
Also, try to damage AVCHD file (place garbage in the middle, or something like it).
Test MJPEG playback then cam is connected to TV. As it has different menu in this case.
 
Last edited:
Tried connected to tv.

MJPEG error patch 1 and 2: It shows up when connected to tv. Didn't play though. I shot low detail of table without bottle.
 
Tried connected to tv.

MJPEG error patch 1 and 2: It shows up when connected to tv. Didn't play though. I shot low detail of table without bottle.

Sorry don't understand you.
Error shows up?
Or MJPEG playback stops?
How about damaged AVCHD?

So, as far as I understand error is gone using first patch only then not connected to tv.

Stupid question. Are you able to update firmware using play button during TV output active?

Btw. Test PAL recording on NTSC card (or reverse), please. It is not risky.
 
Error doesn't show up when connected to tv in both modes, but still no playback. I click play, you hear that slideshow music for tv mode but no playback happens.

What do you mean by damaged AVCHD? Not sure what you mean by putting garbage in the middle.

Will test the PAL on NTSC later, does this require the in camera NTSC/PAL switch? Or just doing a firmware update and then recording in both modes?
 
Error doesn't show up when connected to tv in both modes, but still no playback. I click play, you hear that slideshow music for tv mode but no playback happens.

It does not show without patches also, right?
Most important for now is error message and not playback or not.

What do you mean by damaged AVCHD? Not sure what you mean by putting garbage in the middle.

Get this thing
http://www.hhdsoftware.com/Products/home/hex-editor-free.html

And make garbage in the middle of MTS file on SD card :-)

Will test the PAL on NTSC later, does this require the in camera NTSC/PAL switch? Or just doing a firmware update and then recording in both modes?

Yes, use PAL<->NTSC patch also.
And try recording different footage on same card (changing standard in menu).
 
PTool 3.40d updated

GF1
Added "Manual movie modes (old version)" patch (by request).
Added "Version patch for v1.24" (this is totally untested, must be used alone by owners of cameras with v1.24 firmware!)

GH1
Added "Movie format error" patch. (removes error if you try to record PAL footage on NTSC card).

Added "Lens mount flag" patch (prevents Lens not mounted errors).
Added "External microphone" patch (makes camera think that external mic is attached, useful then external mic is used with remote shutter).
Last two patches are risky patches (system routines called before any interface), so, I warned you. But we need to know how they work to go further.

Please be more specific about the external microphone patch.
The microphone uses the first three connections of the four contacts on the plug.
The remote control uses the last two rings, contacts 3 and 4 close to the base as in this
schematic

http://www.instructables.com/id/Panasonic-G1-GH1-Remote-Shutter-Release/

My guess is that the camera can tell what is connected - mic or remote - by measuring the resistance across points 3 and 4. If it is zero, it means they are shorted by the microphone plug, if it is greater than 2 Kohm then a remote is connected.

My guess is your patch ignores the zero resistance test result.
But the microphone still needs to be connected in a way as not to shorten connections 3 and 4, rendering the remote useless.

Please confirm that a special 4 contact plug needs to be adapted to the microphone to make it work with the remote.
 
Last edited:
Back
Top