C300: C 300 Mk 2 Browser remote problem using WFT6a

M

Mark Smith

Veteran
I ran into this problem recently: Used the wifi remote control recently with an iPad controlling the camera through the browser remote/WFT6A adapter pathway. Everything worked perfectly, had a live view which could be toggled on and off, all controls worked. Today, while on a shoot a fired up the browser remote on the same ipad. The camera is set to one user Full control. When I go to log in with the web browser I get an error message that another user is already logged in, which is not the case, and while I can log in to control the camera, I can't get live view, but all camera controls function.

Has anyone one else stumbled on this problem and is there a cure ? I'd really like to have live view back in operation.
 
In the newest firmware version there is a mention that if you enable Magnification while Recording it disables the Live View over Browser.

Could your magnification while recording be turned on?
 
Macaholic said:
In the newest firmware version there is a mention that if you enable Magnification while Recording it disables the Live View over Browser.

Could your magnification while recording be turned on?
Click to expand...


Yep that was the issue. Just turned off magnification while recording and live view works again. Thanks for the tip!
 
You must log in or register to reply here.
Back
Top