upgrate firmware ???

I don't know what to tell you.

I've upgrade our HVX200 twice now on a Mac using a 64 GB SD card and the process outlined in the manual.

You have the cam on AC power and you are following the procedure exactly?

Exactly which firmware did you download?

You aren't trying to use an Asian or European version?

And what is your existing firmware?
 
Thank you for your help:

>You have the cam on AC power and you are following the procedure exactly?

Yes.

>Exactly which firmware did you download?

4.06-00-0.00

>You aren't trying to use an Asian or European version?

I don't think so, but how does one tell? The link 'm following was one found here & on another HVX board.

>And what is your existing firmware?

2.03-00-0.00
 
Had a friend who's done the update and called me to say he's lost the fuctionality of switching between 16x9 etc.....Is anyone aware of any gremlins or bugs in the firmware update?
 
You can only switch to 4:3 in DV25 and DVCPro50 mode -- you can't do that in DVCProHD.
 
I made the update and it worked...I shot using the two 16gb cards, all seemed to work well. Now in post trying to download the cards but my comp see them when I try and mount I get a bad disk error from FCP. I put the cards back in the camera and all the clip numbers are red and they wont play back, should I freak out now?

Thanks for the feedback....double checking that I did ALL the updates.
 
FIXED it...never mind last post. But to warn anyone who is upgrading to 16gb P2 cards...GO ahead and update all your gear now so you never have to think about it, nothing is worse then the morning of the shoot you realize you need to upgrade.
 
You must log in or register to reply here.
Back
Top