Andrew Brinkhaus
Veteran
The other benefit to the closet light he uses is that it fills the entire lens, so their is no chance of ambient light or other sources affecting exposure.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
hence the need for a dimmer, or just stop down accordingly if you have a manual lens. and you would probably need a lot of diffusion either way.My advice, just me, is to get a standard regular incandescent light and stay away from the LED...wayyyy too brighthttp://www.buyhardwaresupplies.com/...ht With Push Switch Lens&width=314&height=384
My advice, just me, is to get a standard regular incandescent light and stay away from the LED...wayyyy too bright. But if you have the 50mhz flicker that bothers you, maybe it's good for you. The led light is too small, so if you don't have it in the exact same spot every time your resluts are going to be different, even the slightest move and your shutter will be off. Also, the 3 way dimmer isn't really a dimmer. It just turns off 1 bulb each click. You may not get the same amount of light, but nothing the camera will notice.
I suggest this and use a cloth to dim it a bit.
http://www.buyhardwaresupplies.com/...ht With Push Switch Lens&width=314&height=384
maybe you have a different led lying around over in switz, but the ones around here, just don't dim
The diameter of the Dot it is almost exactly the same as my manual nikkors. I'm using a cloth too, otherwise the shutter closes too much.
The thing is, I don't have to get the exact same position all the time, because I can see the shutter adjusting, but I surely could, the thing fit's my lenses as it was made for them. The dimming function is just turning off one of the three leds at a time. Only one option offers the correct amount of light (I think it's the dimmest).
either. seems like you get the same shutter speed with the "before lv + polarizer" as with the "+/- 0 f/4", the difference is just that the former is overexposed. what if you stop that down to the same exposure, don't you get very similar results? i'm still not sure what benefit there is with locking before live view. since i work with 50hz lights i can't really use that method unless i find a light source that gives me 1/50 every time so i'm curious what i'm missing.
led dimmers are typically built into the light, so that's one thing to carry around total rather than a light and a cloth, which makes two. ;-) i'm not saying that led's are better per se, but i don't think it's fair to dismiss technology just because you don't understand it yourself. i can't perform cardiac surgery, but i sure as hell believe in its merits even though rest and the occasional dose of nitro can work well too.i've never heard you mention a pwm dimmer in your posts. but if you can dim an led light, awesome. i prefer to use less gear when the incandescent light does just fine when I put a cloth over it.
led dimmers are typically built into the light, so that's one thing to carry around total rather than a light and a cloth, which makes two. ;-) i'm not saying that led's are better per se, but i don't think it's fair to dismiss technology just because you don't understand it yourself. i can't perform cardiac surgery, but i sure as hell believe in its merits even though rest and the occasional dose of nitro can work well too.
/matt