ChuckS
Veteran
There are several threads on different sites discussing various camera supports, everything from DIY, RedRock Micro, to Zacuto, After looking at all of these I decided I couldn't/wouldn't spend more for the support than I did for the camera. I also knew I was not going to build one myself from scratch.
So I went in search of alternatives which I have shared in the several posts.
I decided to take pictures of my setup so people could see what it is and how it works. What I discovered is that I'm not very good at photographing products but here it is nonetheless.
http://www.frameyourart.net/7D2.jpg -- I don't know how to embed the image into this post?
This is a shoulder mount system which includes an accessories box, an adjustable back support, a counter wait (not shown), two hand grips, a telescopic support arm (not attached in picture), a CAVISION LCD swing away viewfinder, 15mm Carbon fiber support rods with quick release, and a 4x5 Matte box.
I have placed the accessories box under the camera to give it some additional height but it can also be attached on the back shoulder pad. The camera support can be adjusted to accommodate a larger camera like the EX1, the handles can be adjusted with the push of a button and the telescopic support arm is spring loaded and can be adjusted to rest comfortably on your stomach or waist. As an alternative to that you can attach the counter weight to the back pad and the 7D requires very little support.
Not only is there a substantial price difference between this setup and a Zacuto for example, but there's probably a bit of an ideological difference too. The aforementioned products are more configurable in the way a photographer might want to use it, this set up is probably what videographers are more accustomed to.
So I don't think choosing the right camera support is simply about price, although this setup is less then half the cost of a comparable set up from from Zacuto or RedRock, but about how you want to work. Clearly the 7D would benefit from either type of solution, and as you can tell I've approached it from more of a digital cinema perspective, which I'm not sure is the right approach. It works incredibly well in a production environment but it "hinders" the "gorilla" aspect of shooting with the 7D. I find myself detaching the camera from the support, removing the matte box (if I don't need filters) and holding the camera by the support rods. People don't pay attention to that and think I'm taking stills.
Since I've chosen this route the next thing is a follow focus, but I'm not going to pay $1200...
Anyway for others who are experimenting and looking for ideas I hope this helps.
So I went in search of alternatives which I have shared in the several posts.
I decided to take pictures of my setup so people could see what it is and how it works. What I discovered is that I'm not very good at photographing products but here it is nonetheless.
http://www.frameyourart.net/7D2.jpg -- I don't know how to embed the image into this post?
This is a shoulder mount system which includes an accessories box, an adjustable back support, a counter wait (not shown), two hand grips, a telescopic support arm (not attached in picture), a CAVISION LCD swing away viewfinder, 15mm Carbon fiber support rods with quick release, and a 4x5 Matte box.
I have placed the accessories box under the camera to give it some additional height but it can also be attached on the back shoulder pad. The camera support can be adjusted to accommodate a larger camera like the EX1, the handles can be adjusted with the push of a button and the telescopic support arm is spring loaded and can be adjusted to rest comfortably on your stomach or waist. As an alternative to that you can attach the counter weight to the back pad and the 7D requires very little support.
Not only is there a substantial price difference between this setup and a Zacuto for example, but there's probably a bit of an ideological difference too. The aforementioned products are more configurable in the way a photographer might want to use it, this set up is probably what videographers are more accustomed to.
So I don't think choosing the right camera support is simply about price, although this setup is less then half the cost of a comparable set up from from Zacuto or RedRock, but about how you want to work. Clearly the 7D would benefit from either type of solution, and as you can tell I've approached it from more of a digital cinema perspective, which I'm not sure is the right approach. It works incredibly well in a production environment but it "hinders" the "gorilla" aspect of shooting with the 7D. I find myself detaching the camera from the support, removing the matte box (if I don't need filters) and holding the camera by the support rods. People don't pay attention to that and think I'm taking stills.
Since I've chosen this route the next thing is a follow focus, but I'm not going to pay $1200...
Anyway for others who are experimenting and looking for ideas I hope this helps.
