GH1 firmware research volunteers required

As for 60i wrapper patch

It just makes video like 25p->50i (2x)
So, instead of 23,97p->59,94i
it makes 23,97p->47,94i (at least I hope so :-) )

So, we must make quick low level file structure research here.

P.S. Board have some bug in PHP script.
 
Last edited:
Assuming upping the bitrate works is there any chance of 1080p motion jpeg?

Not until we got to sensor settings details.
MN103 processor module is quite poor, no stack handling, no local variables, many jumps not handled propertly (like mov 0x123, A2; jmp (A2)) and we have many not usual jump tables and nested jump tables and pointer tables (I believe I remember table within table within table) :-(
And WinGraph32 is just a mess.

Anyone with C++ knowledge want to look at it?
http://www.hex-rays.com/idapro/freefiles/wingraph32_src.zip
I need depth adjustment (from current function) and realtime dirty filtering (visually removing functions these names not contain input string).
 
more testings in daylight are required but the dynamic mud is gone!!!

back on testing, just tested the GOP hack on 720p60 I set GOP=3 and seem to works fine, the frame structure now is:

IPPIPPIPPIPP...

the mud caused by low bitrate + extremely long gop is gone TOTALLY!

Also, the bitrate seems to be incremented, and only GOP is patched :

bitrate declared : 16 568 320
real max : 21 661 421
real avg : 18 099 056
real min : 15 835 715

avg/max (I) : 60 100 / 102 144
avg/max (P) : 26 868 / 68 928


BTW, gh1 suffers two mud types, dynamic and static, the static mud is caused by low bitrate, appears badly when shooting detailed scenes, like scenes with lot of grass.

tomorrow I will do also the "mud grass test" to check the static mud.
 
on ptool 3.9 MJPEG freezes the camera again if record more than 1 second, I'm using a sandisk videoHD 16 gb, this couldn't be the cause. The 1 sec video framerate is 5, apart from that is a nice 5fps video.
 
more testings in daylight are required but the dynamic mud is gone!!!

back on testing, just tested the GOP hack on 720p60 I set GOP=3 and seem to works fine, the frame structure now is:

IPPIPPIPPIPP...

the mud caused by low bitrate + extremely long gop is gone TOTALLY!

Also, the bitrate seems to be incremented, and only GOP is patched :

bitrate declared : 16 568 320
real max : 21 661 421
real avg : 18 099 056
real min : 15 835 715

avg/max (I) : 60 100 / 102 144
avg/max (P) : 26 868 / 68 928


BTW, gh1 suffers two mud types, dynamic and static, the static mud is caused by low bitrate, appears badly when shooting detailed scenes, like scenes with lot of grass.

tomorrow I will do also the "mud grass test" to check the static mud.

GOP hack work with 1080p? Give it a try? Or would it run into problems thanks to pulldown? IPPIPPIPP would be amazing...again I would be testing a lot of this myself but my GH1 is needed this week for film project and I don't want to run any risks...not of bricking the camera or anything but mainly just of not getting things back how they should be (which I a get should be pretty easy but still.)

To clarify, to get things back to normal what do you do again? Can you just load a default firmware version or do you need to make a version # or other change with the tool?
 
tester13, i had a thread a long time ago started about the 30p from mjpeg and i was using a method to delete every 5th frame in order to get 24p. you can see the results here. both 30p and 24p are up for comparison. try that method instead.

http://www.dvxuser.com/V6/showthread.php?t=186262&page=6

I did that test (check out the thread) and I found the image looked unacceptable to me....I recall you disagreed.

It just looked like 30p with a frames dropped because dropping every 5th frame does not change the incremental difference between the other frames.
 
What about GF1?

What about GF1?

Hi!

this looks very exciting, except that ... I have an GF1, not GH1.

Is there any plan to support GF1 as well? How difficult would supporting GF1 be?

G
 
dvx needs to solve the php error inlast page

dvx needs to solve the php error inlast page

repeat, this thread is utterly addictive, tester your a hero if you sove this mud? but it does raise the question, if it is solvable why arent Panasonic with access to the whole data set doing something about it? very very frustrating.
 
repeat, this thread is utterly addictive, tester your a hero if you sove this mud? but it does raise the question, if it is solvable why arent Panasonic with access to the whole data set doing something about it? very very frustrating.

Because they make more profit when they give you crippled devices initially, and later they can extract more money from you by making a new model available for the same device they first sold you crippled...
 
f it is solvable why arent Panasonic with access to the whole data set doing something about it? very very frustrating.
Panasonic will have chosen values which, overall, will be the best compromise for the target market. For instance, juggling data rate vs card capacity. It's a call which they may have got wrong, of course.
 
Good day'

Someone who have SDHC card Class 6 or Class 10, please test it setting on Ptool. Thanks.

Settings in Ptool:

VA Bitrate adjustment: 200000000
VA Bitrate adjustment 2: 240000000
VA 720p 50 GOP Size: 2 (and next test on 1)
VA 1080p 25 GOP Size: 8 (and less)
AU Audio encoding bps: 320000


I can't test less GOP because have only SDHC card Class 4.
(This text show's on my camera display: "You Card Speed is too low for recording video").
 
Last edited:
And next info:

Then Ptool setings is:

VA Bitrate adjustment: 200000000
VA Bitrate adjustment 2: 240000000
VA 720p 50 GOP Size: 3
AU Audio encoding bps: 320000

General SHD

Overall bit rate : 20.3 Mbps
Maximum Overall bit rate : 24.0 Mbps

Video

Bit rate : 19.2 Mbps
Maximum bit rate : 16.6 Mbps


8GB Card can write 51min. video (original setting file time is 1.01 h). 10 min less..
 
Can we send money for testers to buy fast cards?

Can we send money for testers to buy fast cards?

Good day'

Someone who have SDHC card Class 6 or Class 10, please test it setting on Ptool. Thanks.

Settings in Ptool:

VA Bitrate adjustment: 200000000
VA Bitrate adjustment 2: 240000000
VA 720p 50 GOP Size: 2 (and next test on 1)
VA 1080p 25 GOP Size: 8 (and less)
AU Audio encoding bps: 320000


I can't test less GOP because have only SDHC card Class 4.
(This text show's on my camera display: "You Card Speed is too low for recording video").

Looks like we have some extra funds. I suggest we invest in fast cards for users who do testing. What do you say?
 
+1

Get a class 10 card to tester13 and NURBS as soon as possible.

\/ \/ and Chibs
 
Last edited:
I'll try it soon with a class 6 card.

Please note that for NTSC models you would most likely try changing the 720p 60 GOP and the 1080p 30 GOP, instead of the PAL variants.
 
Good day'

Someone who have SDHC card Class 6 or Class 10, please test it setting on Ptool. Thanks.

Settings in Ptool:

VA Bitrate adjustment: 200000000
VA Bitrate adjustment 2: 240000000
VA 720p 50 GOP Size: 2 (and next test on 1)
VA 1080p 25 GOP Size: 8 (and less)
AU Audio encoding bps: 320000


I can't test less GOP because have only SDHC card Class 4.
(This text show's on my camera display: "You Card Speed is too low for recording video").

I have good news and bad news.

First off, these settings work. However, class 6 speed is NOT enough for recording longer then a couple of seconds. After about 30 seconds I get the message that Recording has been cancelled due to the writing speed of the disk. However, I'm still left with a short clip of pure awesome. :) I tried to induce mud, but none appeared. I will no try it again in my over-detailed garden, to see if we're truly rid of any mud.
 
Back
Top