DVX100AE flaws/problems (same as in DVX100)!

Re: DVX100AE flaws/problems (same as in DVX100)!

[quote author=mine link=board=Events;num=1077122851;start=125#137 date=03/02/04 at 02:34:45]
You for sure mean 1/25  - as we live in PAL countries(I share this with 75 % of the world population.
[/quote]

Hi mine,

No, I know you're in PAL territory. I meant 1/30th, because 1/25th would mean you had no shutter whatsoever and the resulting video would probably be way too blurry. You can choose 1/30th by using the synchro-scan menu. Lots of NTSC users have mentioned getting satisfactory results with 1/36th -- kind of a compromise between 1/24th (no shutter) and 1/50th (default). So try using 1/30th or 1/36th and make a progressive PAL DVD and plug it in to your TV through DVI. I suspect that you will be thrilled with the results.
 
Re: DVX100AE flaws/problems (same as in DVX100)!

barry--great tip on the 1/36th for NTSC users: I'm going to try it out when I get home! :)
 
Re: DVX100AE flaws/problems (same as in DVX100)!

[quote author=Barry_Green link=board=Events;num=1077122851;start=125#140 date=03/02/04 at 10:55:15]

Hi mine,

No, I know you're in PAL territory.  I meant 1/30th, because 1/25th would mean you had no shutter whatsoever and the resulting video would probably be way too blurry.  You can choose 1/30th by using the synchro-scan menu.  Lots of NTSC users have mentioned getting satisfactory results with 1/36th -- kind of a compromise between 1/24th (no shutter) and 1/50th (default).  So try using 1/30th or 1/36th and make a progressive PAL DVD and plug it in to your TV through DVI.  I suspect that you will be thrilled with the results.[/quote]

@Barry
great I will give it a try today
 
Re: DVX100AE flaws/problems (same as in DVX100)!

I dont know how many of u have seen these grabs and clips (I am sure many would have), but i saw them for the first time. May be of interest...some good illustrations of motion blur on pans..in the NTSC version. In fact not quite dis-similar to what we are talking about in the 100 PAL.

http://www.dvinfo.net/panasonic/reports/farr/
 
Re: DVX100AE flaws/problems (same as in DVX100)!

I posted a new topic dedicated to audio delay in live mode, with a poll...

Cris
 
Re: DVX100AE flaws/problems (same as in DVX100)!


Hi,
just wanted to post my Diagnostic/Adjust menu settings:

BER DISPLAY – OFF
SAMPLE SPEED – SLOW
VERSION- V:1.06 C:1.09
A. OFF 000000-000000-0000
000000-000000-0000
000000-000000-0000
000000-000000-0000
000000-000000-0000

Adjust Menu

ATF GAIN ----
LINEARITY ----
Y LEVEL 9A
C LEVEL 6D
DEFECT COMP 0
DEBUG INF OFF
EEPROM VERSION 1.02

Cris
 
Re: DVX100AE flaws/problems (same as in DVX100)!

[Only an idea but perhaps it's some sort of problem with some sort of "progressive scan" or "100Hz" technology that's being built in most modern TVs here in PAL land...
I tend to agree with this theory. I just bought my dvx 100ae and was most horrified to see the jaggies as i panned however slowly. The local Pani engineer was present and said it wasn't any manufacturing defect but that if you record 25P, you need to be / have progressive down the line....meaning, the television monitor or projector all have to be progressive. sigh!...
 
You must log in or register to reply here.
Back
Top