Does everyone shoot shoulder mount?

Hmmmm, a $4400.00 camera rig... to fly a $5000.00 camera... that would take some thinking about for sure.

:D

I felt like posting it for comparison's sake. That looks like a steel truss coming over the back of that vest, lol.

This is also the rig used on aforementioned feature shot with a fully-built Red ONE MX.
 
No doubt, it can be the right choice and can be done brilliantly. It just seems to have become a cheap excuse for everybody who doesn't want to learn how to frame a nice shot and shoot proper coverage.

Maybe. But I know how to shoot, so from my perspective it becomes another choice. And in the case of the Black Swan for example - a wonderfully beautiful choice. I just dont see that laziness can blanket the topic as some seem to believe.
 
those easyrigs need to be matched somewhat to the weight of the camera. if you use the model rated for 40lbs with a 15lbs rig, it'll just get sucked up to the top of the bar.

they're available for rent, which may make more sense if you don't know how heavy your rig will be for any given shoot. i used one on a 4-day shoot in november with an hdx900. wall-to-wall handheld, 13 hours each day. i would not have survived without the easyrig, but ultimately it does just spread the hurt rather than eliminate it entirely. it also engenders a slightly different way of shooting handheld.
 
I have thought about many ways to respond to this thread and have basically concluded its a bit like setting up a race car, or maybe choosing the right car for the race you are in today, taking that second example it may be a 4X4 one day and a sports car the next if you race on different tracks

Of course if you work with a focus puller the game changes again

fs_01.jpg

This is my rig, I have concentrated on getting the camera as low on my shouder as possible which helps the eyeline issue if you are interviewing someone shorter, but only marginally

The side handle allows me to operate waste height as does the fact that I use a monitor, not an EVF

It also drops onto my sticks

THats the best compromise that I can build.. I think to get better I would need to build a rig for specific shots, which might be fine in narrative but is no good for the corporate fast tuff that I do

get building!

My blog on this rig.. http://dslr4real.tv/index.php?option=com_zoo&task=item&item_id=98&Itemid=1

Best
SMM
 
The Turtle Rigs have weight adjustment so you can dial in for the camera weight you are using. I am thinking of the Turtle Strong version.

As for handle, I have a Berkey FS00 plate and top handle. I think I would use this ANY DAY over the FS100 handle. That said, I'd still try the FS100 handle just to see what it did.

My only concern with the Berkey handle is that the poles don't lock in when you thread them in. I am thinking to buy another block to put down over the threaded area how the handle comes in to lock the two together a little better.

I've been reading reviews for days now on this thing. Almost ALL positive. Some concerns about the bar over the head and how much clearance for people with log necks, which I don't think I have. I might order next week.

I will get someone to take a picture of me using it on our next shoot if I get it :)

Want to get it early so I can experiment with it!!
 
I have thought about many ways to respond to this thread and have basically concluded its a bit like setting up a race car, or maybe choosing the right car for the race you are in today, taking that second example it may be a 4X4 one day and a sports car the next if you race on different tracks

Of course if you work with a focus puller the game changes again

View attachment 46336

This is my rig, I have concentrated on getting the camera as low on my shouder as possible which helps the eyeline issue if you are interviewing someone shorter, but only marginally

The side handle allows me to operate waste height as does the fact that I use a monitor, not an EVF

It also drops onto my sticks

THats the best compromise that I can build.. I think to get better I would need to build a rig for specific shots, which might be fine in narrative but is no good for the corporate fast tuff that I do

get building!

My blog on this rig.. http://dslr4real.tv/index.php?option=com_zoo&task=item&item_id=98&Itemid=1

Best
SMM

Minus the microphone and mattbox, (or whatever that is, filter holder?) This is how mine was set up. My camera was a little bit further back as I wanted the camera sensor plane to be the same as my eye.

Which reminds me, anyone using a remote with their FS100 in the LANC port? The start/stop buttons are in horrible locations! :)
 
Hey Rick- I'm really curious if you check out the Easyrig or Turtle Rig!
With the shoulder mount cameras, you have the added point of contact of the camera (however lightly) resting on your shoulder.
With the smaller form factor (and especially with add-ons) I'm curious if you'll need to brace the camera against your chest to keep it from floating with less control.
Look forward to your thoughts- hopefully a full-blown review?!? :thumbsup:
 
Hey Rick- I'm really curious if you check out the Easyrig or Turtle Rig!
With the shoulder mount cameras, you have the added point of contact of the camera (however lightly) resting on your shoulder.
With the smaller form factor (and especially with add-ons) I'm curious if you'll need to brace the camera against your chest to keep it from floating with less control.
Look forward to your thoughts- hopefully a full-blown review?!? :thumbsup:

put rails on it and you can just hang your hand off them, pulling the weight down. i don't think stability would be an issue, even with smaller cameras.
 
If I remember correctly, I think I saw Emmanuel Lubezki, ASC, AMC shooting with an Easyrig in the BTS footage on the "New World" DVD. He was shooting with Panavision 35mm cameras. When I first saw the footage I didn't know anything about the rig, now that I have looked into them a bit, it seems like an interesting choice to use them with such large cameras. They did have a Steadicam and seem to use that quit a bit also. I really like the gizmo, from what I have seen from the promos. I think that your expectations need to be tempered a bit if getting this rig. I doubt that it would give Steadicam like stability, but would probably clean up handheld work a lot. If you get one Rick, I also look forward to your views on it.
 
Okay, quick question: Is there anyone else selling fully articulating pistol grips like Zacuto? I'm not saying their grip might not be work the $350 price tag, but I want something to try that's a little less expensive to see if it works for me.

The pistol grips would REALLY help on stability from the hand. The circular grips that I have I know already don't do that. Also, with articulation, I can move that hand grip around.
 
Okay, quick question: Is there anyone else selling fully articulating pistol grips like Zacuto? I'm not saying their grip might not be work the $350 price tag, but I want something to try that's a little less expensive to see if it works for me.

The pistol grips would REALLY help on stability from the hand. The circular grips that I have I know already don't do that. Also, with articulation, I can move that hand grip around.

How about something like this - http://www.bhphotovideo.com/c/product/442198-REG/Cavision_RHD1560_Dual_Handgrips_for_15mm.html
 
Getting closer! I want them on a ball joint so I can really get them into any position. I see that Gini has one, but I cannot find one for sale anywhere.

Ha - I use those Cavision grips. They rotate parallel to the rods axis, that's it. Super cheap but they do the job.

I finally figured out how to hold the rig though (left hand on the left grip, right hand under the camera plate, index finger on the focus gear - FF adds a little damping) so the hand grip position isn't a huge deal to me. What I need is a 4th "leg" - the grips and shoulder mount make three points - when I set the rig down, it flops over. I think a little stub of rod on a right-angle attachment should do the trick, give it one more "foot" when I need to lay it down.
 
Back
Top