Main Idea:
You can make the main body of the RED camera without a single electrical connector, by providing a special inductive interface designed for transferring data and power to and from a docking station. The docking station will have ALL standard connectors, will be an essential part of the camera and might be below the main body, (tripod mounted as I think someone has suggested for a docking station in this forum).
Advantages:
This will avoid all issues related to port failures and there will be *never* wear and tear related to ports on the main camera body. if a port failure occurs, you won't have to send the whole camera to the service. You will have to send only the docking station that will be much easier to repair and in some cases you might already have a second one, or rent one to keep working. Such an inductive system doesn't rely on electrical contacts that should be in good condition and always have limited life, doesn't have any friction elements, isn't prone to static electricity, can not be affected by dust and humidity or even water(!), doesn't wear and tear and therefore is not aging and it's 100% reliability doesn't fade. Also, you *don't* have to be careful when mounting the camera to the docking station and you can un-mount the camera from say the tripod to an underwater housing or a steadicam literally as fast and as carelessly as you can!
Technical details:
A multiple Inductive coupling can be used to transfer power to the camera and bidirectional digital data very easily, efficiently and economically.
The ADC and DAC converters for analog signals can be placed on the docking station, so even the component outputs (if any), as well as the audio input/outputs, can be transmitted in their digital form, between the docking station and the main camera body. When you mount the camera to the docking station, a cheap hall-effect sensor can be used to detect without any contacts the other part and initiate the handshaking signals between the two, establishing a contactless connection. Even the camera battery can be made contactless! There's no doubt about it, but you can choose to mount just a standard battery to the dock station instead.
Conclusions:
It's not science fiction, nor fantasy or Star-Trek technology. This technology was feasible more than a decade ago, but today there are much better components available to make such an implementation even more efficient, very compact, reliable and cost-effective!
You can make the main body of the RED camera without a single electrical connector, by providing a special inductive interface designed for transferring data and power to and from a docking station. The docking station will have ALL standard connectors, will be an essential part of the camera and might be below the main body, (tripod mounted as I think someone has suggested for a docking station in this forum).
Advantages:
This will avoid all issues related to port failures and there will be *never* wear and tear related to ports on the main camera body. if a port failure occurs, you won't have to send the whole camera to the service. You will have to send only the docking station that will be much easier to repair and in some cases you might already have a second one, or rent one to keep working. Such an inductive system doesn't rely on electrical contacts that should be in good condition and always have limited life, doesn't have any friction elements, isn't prone to static electricity, can not be affected by dust and humidity or even water(!), doesn't wear and tear and therefore is not aging and it's 100% reliability doesn't fade. Also, you *don't* have to be careful when mounting the camera to the docking station and you can un-mount the camera from say the tripod to an underwater housing or a steadicam literally as fast and as carelessly as you can!
Technical details:
A multiple Inductive coupling can be used to transfer power to the camera and bidirectional digital data very easily, efficiently and economically.
The ADC and DAC converters for analog signals can be placed on the docking station, so even the component outputs (if any), as well as the audio input/outputs, can be transmitted in their digital form, between the docking station and the main camera body. When you mount the camera to the docking station, a cheap hall-effect sensor can be used to detect without any contacts the other part and initiate the handshaking signals between the two, establishing a contactless connection. Even the camera battery can be made contactless! There's no doubt about it, but you can choose to mount just a standard battery to the dock station instead.
Conclusions:
It's not science fiction, nor fantasy or Star-Trek technology. This technology was feasible more than a decade ago, but today there are much better components available to make such an implementation even more efficient, very compact, reliable and cost-effective!
Last edited: