Three pins: Ch1 positive, Ch2 positive, and common ground. The RCA ends will each take one of the positive feeds (to the center pin) and the common ground (to the collar).
Connecting SD302 to TASCAM HD-P2
- Thread starter hazmattt
- Start date
Three pins: Ch1 positive, Ch2 positive, and common ground. The RCA ends will each take one of the positive feeds (to the center pin) and the common ground (to the collar).
marsupilami_4
Active member
I'm feeding the Tascam line level (+4 dBu) from an SQN mixer with the pads engaged on the Tascam's inputs, don't know if that's how it's supposed to be but I never had any issues in terms of sound quality. I know how it sounds when for instance you feed the camera's mic inputs with line level and dial gain to min, meters tell you you're good but you get a crunchy/distorted sound. I can affirm there's none of that. I set the Tascam at ref = -12 dBFS (the SQN's limiters kick in at +7 dBu) and the gain is in between 2 and 3.
I have to add that the SQN's line outputs are transformer balanced as opposed to the SD's transformerless outputs which might make a difference (or not, I really don't know to be honest).
I have to add that the SQN's line outputs are transformer balanced as opposed to the SD's transformerless outputs which might make a difference (or not, I really don't know to be honest).
