3 things for an AF successor

Um...USB 3.0 SD Card Readers exist.

i never take out my SD card out of camcorder.... i just connect my cam to pc.... i am not sure if its true , but i ve read somewhere that this way the card will live longer..., never had to change the card during shooting yet.... 32GB last for a long time... plus anyway i dont have sdhc reader on my desktop yet and not on my laptop
 
This is my superstition, may not be completely true and continues in the off topic... but I NEVER take SDHC cards out of the camera to transfer data as I don't want to incur any moving wear on the connectors. I feel that this may be the only real thing that could lead to card failure.

In truth it doesn't take that long to transfer data via USB 2 though I agree the new camera should be USB 3 spec.
 
1) SENSOR TECH: Full Frame sensor with micro 4/3 crop for legacy lenses
2) DYNAMIC RANGE: 13 stops of DR
3) IN-CAMERA CODEC: Recording option for in-camera AVCHD, 10-bit 4:2:2, 10-bit 4:4:4(!)
4) FORM-FACTOR: SLR form factor with LCD screen on back
5) INTERFACE: Dedicated buttons for Gain (with 1db increments without having to go into the camera menu), Iris, Shutter and White Balance and are conveniently placed in the natural grip position of the camera operator.

Well five things.
 
Chop the handle/LCD off this thing and slap it on with some sort of quick release a-la C-300. LCD, XLRs and Microphone available if you want it, compact body if you don't. Gosh people, the tech already exists right under our noses!

HDC_Z10000_back-slant_540x405.jpg
 
http://www.bhphotovideo.com/c/product/805158-REG/Panasonic_BNSDCMAB_UHS_1_Compliant_USB_3_0.html

If speed matters to you, and you're using the fast UHS-1 cards, then this is probably $52 well spent.

the thing is that i dont have usb 3 on my pc or laptop, for pc i could probably get pci e card, but laptop is actually what i take with me on shooting and this is where i store and back up my data at home i just transfer date to pc over network! also and i am not even sure if my laptop can read SDHC at all.... so usb cord is what i use....

i believe USB3 is the smallest possible improvement they should add to a new version of camcorder, -
 
1) I don't really care how it is accomplished with regards to codecs, sensors, chroma sampling or otherwise, but the successor should be specifically targeted to satisfy the BBC QC boys out-of-the-box. No issues with any broadcaster's HD camera "list" as an "approved" acquisition unit.

2) On board (swappable) SSD.

3) Harden/weatherproof the exterior a bit, beef-up the base to handle real baseplates and tripod plates.

3.1) Rethink the processing architecture to provide for meaningful firmware upgrades.
 
Last edited:
Just got off a short film shoot and two features I wish the AF100 had:

1. Input on back for AC power instead of getting power by plugging in via the battery port.

2. Metadata which recorded Scene File data for every shot. (If you essentially are locked into a look by how you shoot it would be nice to have that info to refer back to later when doing pickup shots)
 
Jan told a close friend of mine that no iteration ever of the AF100 will have 4:2:2. Not now, not ever.
So we can all forget about 4:2:2 in the AF170, AF200 or whatever it may be. I do, however suspect that they'll come
up with some technology that'll address this in a way that makes the discussion of 4:2:2 non sequitur.
 
Shoulder mount Egonomics!!!!!!!!

I don't care if its a mostly empty Shell a camera needs to sit on your shoulder, clunky rigs are a pain and a hogpog pain at that.
 
Shoulder mount Egonomics!!!!!!!!

I don't care if its a mostly empty Shell a camera needs to sit on your shoulder, clunky rigs are a pain and a hogpog pain at that.

+100 ... and it's easy to do because it's "old school" technology too ... ;-)
 
Jan told a close friend of mine that no iteration ever of the AF100 will have 4:2:2. Not now, not ever.
So we can all forget about 4:2:2 in the AF170, AF200 or whatever it may be. I do, however suspect that they'll come
up with some technology that'll address this in a way that makes the discussion of 4:2:2 non sequitur.

That's OK internally. I would be very happy with 4:2:2 off the HDSDI port BUT 10 bit, if that were possible.
 
Jan told a close friend of mine that no iteration ever of the AF100 will have 4:2:2. Not now, not ever.
So we can all forget about 4:2:2 in the AF170, AF200 or whatever it may be. I do, however suspect that they'll come
up with some technology that'll address this in a way that makes the discussion of 4:2:2 non sequitur.

if its true , it sucks, i see no reasons for it....of course i am not an engineer or product manager, but they already have 4:2:2 internal on prosumer cams (AG-HPX170, 250)......
 
I'd rather hear that from Jan than from some friend who says Jan said it, because who knows what may get lost in translation etc. I have never heard Jan rule out definitively any feature from any unannounced product, and would find it hard to believe that she would have done so.

Now, if she said "the AF100 itself will never have 4:2:2 internal", then that's perfectly reasonable and understandable -- there will not be a firmware upgrade or change to the existing model to make that possible. But to rule it out on a product that hasn't even really begun development yet? That's just not practical and I sincerely doubt she would have said that. I would chalk it up to a miscommunication.
 
1) keep micro-four thirds (invested in the glass)
2) keep sd cards (love the non proprietary competitively priced media)
3) enable incremental gain adjustments on switch instead of 3 presets
 
1. Change the aesthetics, leave the plastic-camera thing behind and adopt the Panasonic "toughbook" approach.
2. On board ssd with support for both the avc-ultra codec and a 4:2:2 solution.
3. Real 1080 resolution.
3.1. 120 fps 1080.
3.2. Move the VF to the front end of the body.
3.3. Somehow bury some of the switches a little so they aren't hit inadvertently.
 
1. Expanded focus assist.
2. Move the EVF to the front or make it removable.
3. Dump that mickey mouse power switch. ( I have to use my pinky to slide it!)

...and I know it's only supposed to be 3 but I would add a line of purpose built lenses designed for the AF platform. Parfocal with IS, AF, and on-camera control of lens functions.

As a side note, an upgrade of the AF100 to an AF100A model would be fine in my book. Similar to what Panasonic has done with the AC130/160. Make a few tweaks, add some features, and give us first generation guys an option to send our cameras in for the upgrade. Unlike the current firmware update, I would be willing to pay for that.
 
Back
Top