Glimpse Of Over World (bar Sequence)

[jaket]

This is a dialogue sequence from a larger screen play that I'm working on.
I needed to shoot an assignment for a film class I'm taking so I shot this.

We had to cut the shoot short due to an accident on set (one of the extras almost got his eye poked out with an umbrella)

Enjoy.

http://www.youtube.com/watch?v=Pa2BDG_ubqg

High def Clip
http://www.fullspectrumstudios.net/?dir=/Demo+Reel

The file is "glimpse bar.wmv"

 

[PappasArts]

Excellent job. Nice look... Thanks for sharing?

What lens did you use?

Was that Cine mode?

I was looking at you site, I noticed that your Brevis has what appears two Achromats. Why?

This Image: http://www.fullspectrumstudios.net/?dir=/My+Rig&image=Frank6.jpg

Michael Pappas
Arrfilms@hotmail.com
PappasArts & Arrfilms Main site
http://www.pbase.com/Arrfilms
http://www.PappasArts.com
http://www.Myspace.com/PappasArts
CONTACT VIA AOL INSTANT MESSENGER
AT { PAPPASARTS2 }

 

[jaket]

achromat

achromat

I am only using one achromat, the other is a 20mm spacer ring.

I was using a minolta wide zoom 28-70mm (old lens)

i was shooting in cine mode it seems to give you the cleanest image to work with.

 

[PappasArts]

I am only using one achromat, the other is a 20mm spacer ring.

Why do you need the spacer ring?

I thought Dennis said the achromat was enough on the HV20!

 

[Dennis Wood]

The achromat alone is all we use, but if you have a very slow lens (or are attempting to use CF1L on the HV20) the spacer gives extra zoom-in room. J, are you using CF1 or CF1L in there?

 

[jaket]

Honestly I don't remember why I bought the spacer ring. I just took it off and I think it's easier to setup my back focus now.

Thanks for noticing.

 

[jaket]

The achromat alone is all we use, but if you have a very slow lens (or are attempting to use CF1L on the HV20) the spacer gives extra zoom-in room. J, are you using CF1 or CF1L in there?

I'm not too sure, I bought the HD bundle just when it was still just under $1000 and before you put in the variable motor. Is it marked somewhere on the projection surface?

 

[Dennis Wood]

Ah, then it's CF1, and you don't need that spacer...but you already figured that out

 

[ESTEBEVERDE]

Nice sounds.

Details?

 

[ESTEBEVERDE]

What was the on set accident?

 

[wilx]

I hope none of those were supposed to be Irish accents!


Footage looked nice though, considering it's an HV20. Although having said that there's a lot of good-looking HV20 stuff about....