Using the Rode Blimp with the Oktava MK12?

V

vanlam

Member
I'm a noob, so this might be an absurd question.

Anyway, I currently have an Oktava MK012, which I love, and I'm looking for a windshield. I know most people here would recommend the Rycote BBG w/ windjammer.

However, that system would only work with the Oktava. I also use a Rode NTG-2.

So I was wondering if anyone here has used the Rode Blimp successfully with the Oktava? It would be good news to my wallet if it were possible to use the Blimp for both mics.

The Blimp in question is this one:
http://usa.rodemic.com/accessory.php?product=Blimp
From the pic it does look like the suspension rings could be adjusted closer, but I can't be sure.

Thanks.
 
Last edited:
I'm not an expert, but I'd think the big tradeoff would be length, time, and weight. The Rode blimp is honestly massive. Using it with a low ceiling would cause problems.

Time, as taking apart a blimp to swap out a mic does take a while.

Weight, well the blimp is heavier.

If those tradeoffs are acceptable, then I'd think it would work fine.
 
Last edited:
I have a blimp that I used for my Sennheiser ME66/K6 combo, which would also work quite well for the MK012- while it's not the most heavy-duty (like the Rode or the Rycote, it is pretty light weight (1.3 lbs including furry cover) & only 17" long.

It's the "Indian" Blimp (made by CineCity in India) which They're not too expensive- $110:
http://www.thecinecity.com/tcc/product.php?productid=17&cat=264&page=1

I've also found that the Rode WS-6 softie works for most light winds, and they're affordable enough (around $100) to pick up a pair & keep them on the mics.
 
Rippie said:
why would you be using a blimp indoors?
Click to expand...

From his post I gathered he was looking to use the blimp as a windscreen on the Oktava indoors to cover fast swings, and then using the NTG-2 for outdoor shots with the blimp.
 
Wouldn't this be an excellent use for the Rode WS-6 softie? It wouldn't add any length on the rear & would cut fast swings.

Gohanto said:
From his post I gathered he was looking to use the blimp as a windscreen on the Oktava indoors to cover fast swings, and then using the NTG-2 for outdoor shots with the blimp.
Click to expand...
 
Gohanto said:
From his post I gathered he was looking to use the blimp as a windscreen on the Oktava indoors to cover fast swings, and then using the NTG-2 for outdoor shots with the blimp.
Click to expand...

Yeah, that was my idea. I have a crappy windscreen for both mics right now and it would be nice to have a softie that was compatible with both mics.

Alpha Flying Monkey said:
Wouldn't this be an excellent use for the Rode WS-6 softie? It wouldn't add any length on the rear & would cut fast swings.
Click to expand...

Would the WS6 work with the Oktava? I've never used one, but I think it might be too long and wide for the MK-012.
 
Rather than start a new thread I thought I'd reactivate this one.
I have a rode set up for outdoor work, including a blimp.

I'm looking at getting an Oktava MK12 for indoor work (plus partial outdoor work like on a veranda where the mic would be subject to some wind).

Question is the same as the above: does anyone know if the Oktava Mk12 could be used with my existing Rode Blimp (both as wind protection and shock mounting)? Has anyone actually tried this?

I also have a rode pistol grip (with the rubber mount) somewhere which I haven't used since got the blimp (would it fit in that for basic shock mounting)?
 
I'd like to piggyback on this thread. Can a blimp be too long for a mic? I have a chance to get a good deal but it is longer than mics I plan on using.
 
Call me un-informed here, but what suspension system is he using? I thought the Rode system came in different handle/suspension lengths. That is the first place to start. The MK-012 is not a long mic. So a long suspension system may not work for him. Once that question in answered, then we can move on to the blimp side of the question.
 
Well, the blimps suspension is on a rail, so it can be moved closer together and further apart. But the plastic clips that hold the Rode shotgun would require that the MK012 would have to have roughly the same diameter as the Rode to clip in.

I figured as these are both popular mics with people on these boards there might be someone who has tried rigging them both on the blimp.
 
Yes this could be done since the suspension on the Rode Blimp is adjustable for length, but you won't like it at all. For indoor booming with an Oktava or other small condenser, try whatever short suspension you prefer and a Rycote Baby Ball Gag. The keeps the compact nature of you Oktava intact, and provides plenty of protection for quick moves. If you need more protection, add a Windjammer furry.

Note: they make the BBG in a couple of diameters and I can't remember which one to use for the Oktava.

Grant

http://www.bhphotovideo.com/c/product/322363-REG/Rycote_011001_Baby_Ball_Gag_Windshield.html
 
You must log in or register to reply here.
Back
Top