The New Lens

  • Thread starter Thread starter Guest
  • Start date Start date
If I remember correctly the 6 lens set is $48,990

We had all 6 lenses. Ended up gravitating to the 50mm and the 65mm for this shoot. Also, one guy used the 1.6x on the 100mm

The 65mm allowed for getting in close. The 100mm minimum focus kept from getting that ultra ultra close up.

For some reason the 50mm was the ‘money’ frame for what we were doing. Was a little worried about weight on the Ronin 2, but it handled it well. Powered the Mini from the Ronin batts.
 
Speaking of anamorphics...

There are a few new ones out. Cooke has some FF34 1.8x anamorphic. And there is a newer company making a 2x ff35 anamophic which i slooking extrememly promising. I’ll check those out a bit more tomorrow.

P+S Technik has some really vintage feeling anamorphics.

M43 is also getting a new anamorphic budget lens, but it is still in prototype.
 
Last edited:
M43 is also a great format for small yet dynamic zooms. I didn’t have mich interest in m43 until i realized how small a good zoom can be on them. The Panasonic zooms are very nice. Sharp and clean. For anyone that migh like a different look, DZ Optics started a cinema zoom line under the name DZOfilm. They have two lens set: 10-24mm and 20-70mm.
 
And while this may not be a lens per se, but Tilta may be releasing a Red internal ND mount. It is a variable ND from 0.6 to 2.1 in .3 increments. What makes me interested in this, is that the filter can be removed from the side without removing the mount! This mean you can go from filter to bare lens as fast as swapping a mattebox filter.

I don’t know what they plan, but it seems they could easily put any type of filter in, so there could be everything from single value Natural ND type filters, to diffusion effects. This mount has a lot of potential.
 
And while this may not be a lens per se, but Tilta may be releasing a Red internal ND mount. It is a variable ND from 0.6 to 2.1 in .3 increments. What makes me interested in this, is that the filter can be removed from the side without removing the mount! This mean you can go from filter to bare lens as fast as swapping a mattebox filter.

I don’t know what they plan, but it seems they could easily put any type of filter in, so there could be everything from single value Natural ND type filters, to diffusion effects. This mount has a lot of potential.

Hopefully, there becomes a standard size for these “insert” style filters, and that way third party lens mounts and filter companies can all be interchanged.
 
And while this may not be a lens per se, but Tilta may be releasing a Red internal ND mount. It is a variable ND from 0.6 to 2.1 in .3 increments. What makes me interested in this, is that the filter can be removed from the side without removing the mount! This mean you can go from filter to bare lens as fast as swapping a mattebox filter.

I don’t know what they plan, but it seems they could easily put any type of filter in, so there could be everything from single value Natural ND type filters, to diffusion effects. This mount has a lot of potential.

Actually, that filter in the optical path will change the flange ficus length, so you would need to adjust this for no filter, or use clear material with the same refractive index as the ND.

I see this same thing on the lens collimator that I built. It works as expected when no filters are between the lenses, but add an ND to the front of one if them, and the focal length changes enough to see the shift on the kens barrel.
 
Actually, that filter in the optical path will change the flange ficus length, so you would need to adjust this for no filter, or use clear material with the same refractive index as the ND.

I see this same thing on the lens collimator that I built. It works as expected when no filters are between the lenses, but add an ND to the front of one if them, and the focal length changes enough to see the shift on the kens barrel.

+1

Good point.
 
Actually, that filter in the optical path will change the flange ficus length, so you would need to adjust this for no filter, or use clear material with the same refractive index as the ND.

I see this same thing on the lens collimator that I built. It works as expected when no filters are between the lenses, but add an ND to the front of one if them, and the focal length changes enough to see the shift on the kens barrel.

I knew this about filters mounted between the lens and the sensor, but didn't know front-mounted filters would have an effect as well. wow.
 
Front mounted may only do this in that strange flow of pattern through infinity focused lens through filter through infinity focused lens through to sensor. I've never noticed this when just using a filter to view an object through a lens. But as you said, anything behind a lens will change the distance to the sensor, so a variable ND that goes from none to dark would work because you can leave it in the path at all times. Also a reason that cameras with a filter wheel have a real clear glass in the clear position.
 
Arri’s signature primes are pretty awesome to see. Light weight for the size. Machined magnesium makes for a nice “exotic” feel. The image is very neutral, while not running into anything going in a bad direction. For those accustomed to the idea of “lens mojo” these lenses are in a whole different field.

Surely to become the next “envy” of cinema lenses.

From what i’ve heard, the lenses were not designed by any traditional conema lens design, but came from something more technical and industrial. So, the “perfection” aspect is kind of front and center. But nothing looks forced, as they really are good, not forced to look good.

At this point, they are up there with Master Prime and Leica, so they are firmly out of my budget, even for a rental. I just wanted to mention them, as they are part of the new breed of lenses.
 
Last edited:
CN-E series are the only ones that enable Dual Pixel Focus Guide on C200/300/700.

Is there a possibility to program Leica R to EF adapter to fool them thinking there is CN-E on them?

I've experimented with ef adapters for manual lenses on the cinema cameras. It's a mess. To work at all, you need a an adapter that allows you to adjust the aperture because the DPAF reading is dependent on the aperture. You also need to test which aperture reading gives the correct information for foucs. I finally managed to find an adapter, but it only works on one of the my C300 II's. It doesn't work on the other that I own. So, it is a lost cause unless some company designs an AF confirm chip specifically for the cinema cameras and tests it.
 
Got to play around with a Sumire from Canon again today. Interesting lens. I can’t decide whether i truly like it or not yet. Also, i fondled a Leica M recently too. They share the fact that they both have some noticeable CA wide open. Some cat eye bokeh towards the frame edge. Leica M reasures with having a legacy. The Sumire is always crippled at shows by being paired with a C700. Even in Canon’s Sumire demo video, the best looking demo footage is shot on a Red.

The Leica M i played with, was paired with a Sony Venice and detached head, so there was a very compelling size to quality ratio.

Leica Thalia and Leica Prime are very different looking. The newer Leica cinema lenses look more Japanese, in the best way possible. Thalia is an increbile size for owner op, but the price says “rental house” “big show”.
 
Got to play around with a Sumire from Canon again today. Interesting lens. I can’t decide whether i truly like it or not yet. Also, i fondled a Leica M recently too. They share the fact that they both have some noticeable CA wide open. Some cat eye bokeh towards the frame edge. Leica M reasures with having a legacy. The Sumire is always crippled at shows by being paired with a C700. Even in Canon’s Sumire demo video, the best looking demo footage is shot on a Red.

The Leica M i played with, was paired with a Sony Venice and detached head, so there was a very compelling size to quality ratio.

Leica Thalia and Leica Prime are very different looking. The newer Leica cinema lenses look more Japanese, in the best way possible. Thalia is an increbile size for owner op, but the price says “rental house” “big show”.

The Sumire lenses are nice but when I met with the people at Canon USA before NAB, they reported that the Sumires are essentially identical to the CN-E primes until the lens is wide open, then the softening and CA comes out. At close to DOUBLE the cost
of the CN-E regular primes. My personal opinion is that's a lot of money (on a full set) to pay to essentially add "character" ie; optical flaws. I don't blame Canon or any other manufacturer for cashing in on trends, I just personally find the trend
toward pursuing optical degradation of your image a bit pointless. Shoot the best, most neutral image you can and degrade or change the image in post. It's so much more controllable and it gives you options. On top of that, the prevailing trend is
to NOT shoot wide open, ultra shallow DOF is definitely on the downward trend in cinematography so you can deduce the value equation of only being able to get that effect at T1.5. I don't want to shoot at T1.5 if I can avoid it.

Just my opinion, which is an unpopular one at the moment. Evidently you have to shoot with lenses with "character", or you just aren't cool in 2019 ;-)
 
Does that mean I'm retro-cool because my FD lenses certainly have character, and I'm still using an old GH2? I'm almost throw back to super8 film cool at this point.
 
Does that mean I'm retro-cool because my FD lenses certainly have character, and I'm still using an old GH2? I'm almost throw back to super8 film cool at this point.

I think that makes you certifiably cool.
 
Got to look at the Zeiss Radiance lenses for a little bit. They get show cased as having lens flare, but they are actually quite nice when not getting a flashlight shoved down the barrel.

They differ from the Sigma Classics, in that the sigmas bloom and flare over anything.

The Supreme Radiance are more reserved, and have subtle flare that feels more like an 80’s flare than a 30’s flare.

Seems a usable lens for a lot of things, and looks best when not being forced to flare.
 
The more interesting lenses I've tested recently that aren't on this list....

Masterbuilt
https://www.masterbuiltlenses.com/

Blackwing7 (Bradford Young and Neil Fanthom ex Arri who basically did all the leg work on the DNA's then decided to have a TAKE 2 and make these)
https://7isatribe.com/

Vega (TLS)
https://www.truelens.co.uk/tls-introduces-the-new-vega-lens

Also Primo 70's...not that new but still worthy of attention....and Panavision H series...
https://www.panavision.com/products/primo-70-series
https://www.panavision.com/products/h-series

JB

EDIT - Don't forget SLR Magic.....The APO primes and the new Micro Primes are VERY under rated...
 
Last edited:
The more interesting lenses I've tested recently that aren't on this list....

Masterbuilt
https://www.masterbuiltlenses.com/

Blackwing7 (Bradford Young and Neil Fanthom ex Arri who basically did all the leg work on the DNA's then decided to have a TAKE 2 and make these)
https://7isatribe.com/

Vega (TLS)
https://www.truelens.co.uk/tls-introduces-the-new-vega-lens

Also Primo 70's...not that new but still worthy of attention....and Panavision H series...
https://www.panavision.com/products/primo-70-series
https://www.panavision.com/products/h-series

JB

EDIT - Don't forget SLR Magic.....The APO primes and the new Micro Primes are VERY under rated...

Fantastic additions!

I’d not heard of the Masterbuilt lenses personally. What was your experience?
 
The Magic SLR APO’s are now on my short wish list. Ignoring price even. They are a slight departure from my normal preference, which might be Zeiss or Arri neutrality. But i have been considering some character glass for a while. Lomo just had too much mojo, and were no longer that bargain bin price for a good set. Then the Glasswerks FF35 anamorphics came out, oozing with character and composure. But at $30K+ a lens and only sold in sets, i had to concede this to rental only.

The MSLR APO primes have a lotnof mojo while not getting in the way, as maybe some other character glass is. Sigma Classics went a little too far on the reflective surfaces, and yet didn’t change the actual flare character. It’s just reflecting more of the same as their standard set, which, as most modern designs go, isn’t exactly pretty.
 
Xeens might be at the top of the Affordable cine glass list for me. I like certain qualities enough to consider them over a few similarly price lenses. But i think i only like them because they are cheap.
 
Back
Top