Im really concerned about my decision to use SDHC cards with my Sony PMW EX1. I originally decided on purchasing the Sony EX1 over the Sony Z7 which shoots on HDV because i knew the Sony EX1 was true High Definition and that I could Use SDHC cards wih a certain express card reader That i will not mention at this time.
How ever, i have been plaged with problems from the start. I originally lost almost an hours critical footage with using my SDHC Cards and the express card reader. The card just packed up at the end and became unreadable in the camera and in any card reader, so i lost my footage and for the rest of the shoot i was worried about loosing more footage. Then towards the end of the shoot it happened again.
This time it was an important interview. the card just packed up and became unreadable again. the camera couldnt even recongnise it.
I returned the 2 out of 5 SDHC cards and got them exchanged, now i write this after spending the night trying to save an absolutely critical shot that is written on supposedly bad sectors on a SDHC card.
I am starting to see why Sony Charge so much for there SXS cards.
the cards i am using with my expresscard reader are Sandisk Ultra 2 class 4, 16 Gigabyte cards. 15MB/s.
I believe that last part to be important. 15 MB/s, i believe that the SDHC cards are not designed to handle the sony EX1 High Definition at HIgh Quality 50I or 25P modes. And i am not even over cranking.
I read a thread on this site about using these cards and then also later the cards and card reader i bought were advertised as being able to handle shooting in HIGH Quality with the EX1 camera.
Do You know what a bad sector is? I learnt the hard way, your SDHC card is divided up into sectors, when one sector goes bang then you loose whats on that sector. Im Guessing Sony's SXS cards dont have this problem and if they do the extra cost of the card is because they are designed to keep this problem to a minimun.
Whats worse is that the clip with the bad sectors on it can be read still but i can only see the video before and after and inbetween the bad sectors on the clip. So i now need to use a plugin on my SONY CLIP BROWSER that has the ability to use mark in and mark out points. Do you know how much that plug in cost? over $300.
As soon as the clip browser or my PC detect the bad sector the card is instantly ejected from the computer and the conversion is reads error.
I believe the EX1 Camera sends MORE MB/s to the card that the card can handle, and at certain times during filming the MB/s are so high that the SDHC fails whilst recording even when not over cranking (i dont over crank with these cards ever!!!)
How ever, i have been plaged with problems from the start. I originally lost almost an hours critical footage with using my SDHC Cards and the express card reader. The card just packed up at the end and became unreadable in the camera and in any card reader, so i lost my footage and for the rest of the shoot i was worried about loosing more footage. Then towards the end of the shoot it happened again.
This time it was an important interview. the card just packed up and became unreadable again. the camera couldnt even recongnise it.
I returned the 2 out of 5 SDHC cards and got them exchanged, now i write this after spending the night trying to save an absolutely critical shot that is written on supposedly bad sectors on a SDHC card.
I am starting to see why Sony Charge so much for there SXS cards.
the cards i am using with my expresscard reader are Sandisk Ultra 2 class 4, 16 Gigabyte cards. 15MB/s.
I believe that last part to be important. 15 MB/s, i believe that the SDHC cards are not designed to handle the sony EX1 High Definition at HIgh Quality 50I or 25P modes. And i am not even over cranking.
I read a thread on this site about using these cards and then also later the cards and card reader i bought were advertised as being able to handle shooting in HIGH Quality with the EX1 camera.
Do You know what a bad sector is? I learnt the hard way, your SDHC card is divided up into sectors, when one sector goes bang then you loose whats on that sector. Im Guessing Sony's SXS cards dont have this problem and if they do the extra cost of the card is because they are designed to keep this problem to a minimun.
Whats worse is that the clip with the bad sectors on it can be read still but i can only see the video before and after and inbetween the bad sectors on the clip. So i now need to use a plugin on my SONY CLIP BROWSER that has the ability to use mark in and mark out points. Do you know how much that plug in cost? over $300.
As soon as the clip browser or my PC detect the bad sector the card is instantly ejected from the computer and the conversion is reads error.
I believe the EX1 Camera sends MORE MB/s to the card that the card can handle, and at certain times during filming the MB/s are so high that the SDHC fails whilst recording even when not over cranking (i dont over crank with these cards ever!!!)