Cees Mutsaers
Veteran
Who has experience in digitizing film (super8) with the HPX300 and can give me the the full list of scene file settings that gives the best results ?
scenefile settings for digitizing film
- Thread starter Cees Mutsaers
- Start date
Cees Mutsaers
Veteran
These are the setting I got the best results with up to now but I have the feeling there should be a setting which should give much better results in terms of resolution vs noise. Please only mention settings you have experience with no theoretical settings. For instance B.press should give the less noise but the overall resuklt was much worse.
Scenefile CINE D
Resolutie 1080
Codec AVC-I-100
DETAIL LEVEL +4
V DETAIL LEVEL +4
DETAIL CORING +4
CHROMA LEVEL -2
CHROMA PHASE 0
COLOR TEMP A-CH 0
COLOR TEMP B-CH 0
MASTER PED 0
A.IRIS LEVEL -3
DRS effect +3
GAMMA CINELIKE-D
KNEE high
MATRIX Cinelike
SKIN TONE DTL off
V DETAIL FREQ THIN
Zebra 1 70%
Zebra 2 90%
FRAME RATE 25p
SHUTTER OFF
GAIN -3 dB
white balance manual
Flash band compensation OFF
Scenefile CINE D
Resolutie 1080
Codec AVC-I-100
DETAIL LEVEL +4
V DETAIL LEVEL +4
DETAIL CORING +4
CHROMA LEVEL -2
CHROMA PHASE 0
COLOR TEMP A-CH 0
COLOR TEMP B-CH 0
MASTER PED 0
A.IRIS LEVEL -3
DRS effect +3
GAMMA CINELIKE-D
KNEE high
MATRIX Cinelike
SKIN TONE DTL off
V DETAIL FREQ THIN
Zebra 1 70%
Zebra 2 90%
FRAME RATE 25p
SHUTTER OFF
GAIN -3 dB
white balance manual
Flash band compensation OFF
Cees Mutsaers
Veteran
Cees Mutsaers
Veteran
Have a look at an example at my site www.artivideo.nl (look in portfolio and than dizitizing Super 8). Of coarse the source material quality was not that great with respect to sharpness. Is it possible to get a better result by using other scene file settings ?? (detail level and V detail level where both +7 the rest are the some as mentioned above).