S-Log HELP!

[D10S]

So I want to record footage over cranked at 720 30/60p. I also want to record this footage with S-Log via a single SDI to a device like the PIX240. Can I record 60P S-Log to an external device via a single SDI or can it only be done via the dual SDI. I've been running tests and I can find no way to do it.

 

[Jason Davenport]

Dual SDI

 

[D10S]

What (if any) external recorder will record dual link S-Log footage shot at 60P?

 

[Jason Davenport]

Now:
http://www.abelcine.com/store/Cinedeck-Extreme/

Soon:
http://www.convergent-design.com/Products/Gemini444/tabid/1870/Default.aspx Soon to have 1080 60p

http://blog.abelcine.com/2011/05/16/camera-mounted-recorders-comparison/ Recorder info.

 

[TimurCivan]

You cannot record slog in any framerate over 30FPS. It disables if you switch out of 24p or 30p.

 

[Jason Davenport]

Well that sux....maybe later firmware prob.

 

[TimurCivan]

I don't think it works in 720 either.....

 

[starcentral]

When you go past 29.97fps S-LOG works but goes from 444 to 422. Its still 10 bit so not bad but must go over dual-link. Maybe firmware will change this some day...

 

[D10S]

S-Log will work in 720. But only at 24p and 30p. But not at 720 60p. It seems that the ONLY way to get 60p is via dual link with an external recorder. So NO over crank is possible with S-Log except with the CineDeck.

 

[Viddovation]

Shouldn't the Gemini also work?

 

[D10S]

Once it is available...

 

[starcentral]

...at an upgrade cost right?

 

[Douglas Villalba]

I heard that AJA is also working on a Dual Link recorder.

 

[starcentral]

Aja ki mini pro part ii ?

 

[TimurCivan]

Are you guyys sure? Cause my cam disables log when I got to hd108060I.

And the highest I can go in log is 30, and I get no log in 720.

 

[starcentral]

I got my info from this, but that's not to say I understood it properly:

http://www.abelcine.com/store/Sony-CBK-RGB01-Dual-Link-444RGB-Upgrade-for-PMW-F3/#tabs

Why would they say that CBK-RGB01 upgrade enables 10 bit 422 via dual link when it is actually standard with the F3?

 

[Douglas Villalba]

Right now with SLOG to record to say a KiPro Mini you have connect to the SDI out, so can't apply the LUT. What I understand is that with the update you will be able to take 422 out of the SDI A and take the LUT from the SDI Out like you do with DUAL LINK now.