ROXOR-Filmpower integration 3-axis Stabilization VS DJI Osmo

HHL said:
HOLY COW. I've never been so afraid to ask a question for fear of what the answer may be. :)

Hey, iriszhang: when it says "Remote control with smart phone". Does that mean that you can PAN/TILT the camera from your phone? I think some event videographers just might have a melt down if it does.

Fingers crossed. Pan/Tilt/Remote control from phone???!!! :D
(...as in....I might buy 2 more if it does)
Click to expand...

We through the phone application to control ROXOR, and you can also use joystick to control it.
 
iriszhang said:
We through the phone application to control ROXOR, and you can also use joystick to control it.
Click to expand...

Thank you for your response. I just want to confirm that I can perform these functions (from remote camera app or joystick as you mentioned):
1. Pan
2. Tilt
3. Record (start/stop)

Sorry....I just want to be sure.
 
I would have preferred a less flashy design and even better if a Go Pro can be attached. I would like to know the quality of the inbuilt camera vis-a-vis a Go Pro 4.
 
Published the important parameters about ROXOR：


CMOS: 1/2.3 12.4mp in-type back-illuminated CMOS
Video Resolution: 4K;1440P;1080P;720P;480P
Photo Resolution: 20MP

ROXOR, OSMO, GoPro, X1000V Specs Comparison Chart. I think some people who research parameters will be interested in.

QQ??20151028213017.jpgQQ??20151028213108.jpg
 
Last edited:
cpreston said:
I'm interested to see the 20MP stills from the ROXOR. There is a possibility that might be a mistake, though.
Click to expand...

I spotted that too, might be acheived through interpolation though.

Interesting to see it has the same sensor spec as the OSMO (wonder if it's actually the same sensor)

I've pre-ordered but still on the fence about whether to cancel and get a Beholder DS1 to use with my Canon 70D (and any other cameras I might own in the future). Not really bothered about 4K, perfectly happy with 1080p.

I'd be keen to know more details about dynamic range, aperture (fixed? Max/min?), ISO range and focal length/FOV.

Edit: It also occurred to me, what app will it use or will Filmpower be making their own? It's a lot of work to make a useable app that does everything it would need to do!
 
Last edited:
Hey guys,

Hoping the guy from Filmpower is still watching this thread. I just pre-ordered (risky, I know) because I didn't want the special price to end and have to pay the MSRP price. I did so because in this thread, the guy said that you can control pan and tilt "with joystick" as well as the phone app. I really hope this is the case. I emailed Filmpower sales direct and got this non-committal response:

"Hello,

Please waiting our official update info."

Filmpower dude, please help!
 
Dangerpays said:
Hey guys,

Hoping the guy from Filmpower is still watching this thread. I just pre-ordered (risky, I know) because I didn't want the special price to end and have to pay the MSRP price. I did so because in this thread, the guy said that you can control pan and tilt "with joystick" as well as the phone app. I really hope this is the case. I emailed Filmpower sales direct and got this non-committal response:

"Hello,

Please waiting our official update info."

Filmpower dude, please help!
Click to expand...

Yep. If they deliver a 4K pan/tilt cam for (preorder) $200 bucks....it will be LEGENDARY. I totally expect the video to be "average". Even so....find me that combo at that price ANYWHERE and I'll take 3. Oh....and it's a 3 axis gimbal too btw. DANG...I hope that is the case. I pre-ordered too. Yep...risk...but only $200 bucks risky. Not too bad as far as risks go IMHO. Cheers Peeps! :)
 
dblackeby said:
I spotted that too, might be acheived through interpolation though.

Interesting to see it has the same sensor spec as the OSMO (wonder if it's actually the same sensor)

I've pre-ordered but still on the fence about whether to cancel and get a Beholder DS1 to use with my Canon 70D (and any other cameras I might own in the future). Not really bothered about 4K, perfectly happy with 1080p.

I'd be keen to know more details about dynamic range, aperture (fixed? Max/min?), ISO range and focal length/FOV.

Edit: It also occurred to me, what app will it use or will Filmpower be making their own? It's a lot of work to make a useable app that does everything it would need to do!
Click to expand...

I think DS1 and ROXOR is not the same level products. DS1 and Nebula4000 should be the same level products.

Nebula4200 5-axis gimbal will be deliveryed soon, which parameters and performance are very good.

The Nebula4200 series utilizes a 32-bit board dual sensor that gives users high-quality precision control and faster operation speeds.

The Nebula4200 series can handle a load of 1.6kg (3.52lbs), supporting all types of DSLR cameras. The series is also compatible with mirrorless cameras. Regardless of the type of camera and/or lens you have, the Nebula4200 series can handle it.

The Nebula4200 series is ready to use in just 3 minutes. Without tools, simply adjust the balance of the camera, tighten and you’re ready to go. The stabilizer’s built auto-sensing camera detects parameters and matches them, requiring no further parameter adjustments.

Nebula4200 5-axis stabilizers use single or double exchange operation. These stabilizers easily replace single 3-axis stabilizers or other 5-axis stabilizers. The Nebula4200 5-axis gimbal includes a single handle; the Nebula4200lite 3-axis stabilizer is sold separately.

Using a smart battery, the Nebula 4200 series has a run time of over 4 hours. Available power is displayed by LED. An added feature, these stabilizers can provide power to other electronic devices via DC12V/USB5V output.

...

You could find more information on this page. http://www.dvxuser.com/V6/showthrea...bal-Stabilizer-Announcement-(DVXUser-Sponsor)
 
Dangerpays said:
Hey guys,

Hoping the guy from Filmpower is still watching this thread. I just pre-ordered (risky, I know) because I didn't want the special price to end and have to pay the MSRP price. I did so because in this thread, the guy said that you can control pan and tilt "with joystick" as well as the phone app. I really hope this is the case. I emailed Filmpower sales direct and got this non-committal response:

"Hello,

Please waiting our official update info."

Filmpower dude, please help!
Click to expand...

We will publish other information of ROXOR in the future. We have released all the information is true.

If you pre-order our product, but you don't like it. We can give you a full refund. Please wait patiently, and thank you for your support to us.
 
HHL said:
Yep. If they deliver a 4K pan/tilt cam for (preorder) $200 bucks....it will be LEGENDARY. I totally expect the video to be "average". Even so....find me that combo at that price ANYWHERE and I'll take 3. Oh....and it's a 3 axis gimbal too btw. DANG...I hope that is the case. I pre-ordered too. Yep...risk...but only $200 bucks risky. Not too bad as far as risks go IMHO. Cheers Peeps! :)
Click to expand...

Thank you for your support to us.
 
You must log in or register to reply here.
Back
Top