Powering SD302 with a external laptop battery

Harlockr

Harlockr

Active member
Hi there, people with more knowledge :)
I was wondering if it's possible to power the SD 302 with the myPower ALL plus (external laptop battery) www.tekkeon.com
I got it for my portable light, but was wondering if it could be used for the SD302.
The battery goes from 5v to 19v, and it's a pretty nice one.
 
I'm powering my 302, 744T and 2 lectros from an external li-ion laptop battery that does 16/19v. I'm using it with 16v setting without problems
 
From the Manual:

"For extended mixer runtime use an external DC source. The 302 can be powered from any DC source with a voltage range of 5 volts to 18 volts. If using an AC-to-DC transformer, such as a Sound Devices XL-WPH2, make certain its output voltage falls in the 5–18 V range and can supply at least 4 watts. If an over voltage is applied to the mixer, an internal poly fuse is opened to prevent mixer
damage. The fuse is reset when the voltage is removed."

So basically any DC source capable of giving 4W from 5-18 Volts is ok, just need to make a connector: "The external DC connector is a Hirose 4-pin female. This locking connector mates to Hirose P/N HR10-7P-4P (Sound Devices P/N XL-H). Pin-1 is negative and pin-4 is the positive voltage."
 
You must log in or register to reply here.
Back
Top