On Location not showing HD images

[jrp]

Hi.

I connected my HVX200 to a fresh intall of Adobe On Location. And there's the deal.
When I output 480i video, everyting is ok. But when I change the camera to any o f the 720 or 1080 modes, I get no image on the field monitor's window.

Any help would be apreciated

 

[Dick Campbell]

You cannot be in "PN" (native mode), o/w make sure you are not in 1394 Host mode is the only thing I can think of.

 

[erniediaz]

1.- see that your HVX200 is in a "Non PN" mode

2.- make sure you are not in 1394 "host" mode

3.- Selec the HVX200 in the On location device menu

4.- do not use a firewire Cable Longer Than 15 Feet

this should show the image in your monitor and let you record to your HD.

PS: you better use a external USB (best if Sata) hard disk in your laptop

 

[ProfessorU]

I had a 2 meter cable that still caused problems. Definitely try a different cable.

 

[Bob Gruen]

I have a high quality 50' that works fine...

 

[THoff]

I have a high quality 50' that works fine...

Lucky you. Anything over 4.5 meters / 15 feet that doesn't use active repeaters is not within the IEEE spec and not guaranteed to work.

 

[jrp]

thanks, it was the Native thing

 

[Mouayed Zabtia]

Jrp I had same problem before I get the answer for that , problem of OL with DVPRO HD that need very high speed laptop that have hard disk in 7200 RPM so when I get this problem I buy new laptop from HP that is made for editing and video graphic so I test a lot of time and work perfect so if you interesting to work with OL in HD mode tray to get this laptop and I warranty you that will be no problem at all .

http://www.bhphotovideo.com/c/product/531617-REG/HP_Hewlett_Packard_RM263UA_ABA_Compaq_8710w_Mobile_Workstation.html