bradenjobson
New member
Only flown twice! In great condition! Lots of upgrades! Asking $6150 OBO
We're selling our Octocopter Heavy Lifter with a brushess gimbal RTF. We purchased this as our backup copter and never used it for more than 2 test flights! We've decided that we don't need this unit so we are selling. Our loss is your gain! We upgraded this unit to the max, high end motors, high end props, etc, etc. Here is a list of what is included.
Octocopter
Brushless Gimbal with 120T motors
8x T-Motor 15.5 Carbon Fiber props
8x T-Motor U5 motors
3D Robotics Flight Control
3D Robotics GPS
3D Robotics Telemetry
8x T-Motor Brushless Electronic Speed Controllers
Taranis FrSky Radio Controller
3x 10,000 mAh batteries
AlexMos 32bit processor for brushless gimbal
Instruction manual for 3D Robotics Flight controller
Programmed transmitter
8x Custom Lightweight 500mm booms
8x Standard 550mm booms
4x backup 500mm lightweight booms
Lots of replacement parts.
Assembly DVD
The unit comes ready to fly, but there will be some basic assembling required. We will be disconnecting the booms for shipping, so some minor assembly will be required. This assembly is very simple, but if you don't feel comfortable we will be including an assembly DVD.
Booms:
We have made several high end upgrades to this system, one of which were custom commissioned booms. Currently on the octocopter are 500mm booms that were custom commissioned to be slightly thinner that traditional booms. This provides a total of 2/3 pound weight savings over the stock booms, which allows for longer flight times. Should you choose to use the stock booms, we are including those, which are 550mm booms. This upgrade alone is an $800 feature that we are including. We are also including 4 additional replacement lightweight booms.
Brushless Gimbal:
This is one of the best features of this copter. Unfortunately we never got around to fully assembly this portion of the copter. We are including the necessary components to assemble this including an AlexMos 32bit processor.
Additional accessories and replacements:
1 extra 15.5 carbon fiber prop
Lots of replacement parts, screws and connectors.
8x 550mm booms
4x 500mm custom commissioned lightweight booms.
The unit is in pristine condition, only flown twice! There are no visible scratches to nearly the entire unit save 2 props. There are small scratches on 1 or 2 props that seem to have happened in transport. It does not affect flight, and scratched props are something you can expect from flying anyways. A set of 2 new props would cost about $60.
We will not part this kit out, we are selling as a complete package. We will ship promptly once full payment is received. Insurance will be included in the shipping.
This is a professional unit and is not meant for beginners. A base of knowledge is required for a safe and successful flight.
We're selling our Octocopter Heavy Lifter with a brushess gimbal RTF. We purchased this as our backup copter and never used it for more than 2 test flights! We've decided that we don't need this unit so we are selling. Our loss is your gain! We upgraded this unit to the max, high end motors, high end props, etc, etc. Here is a list of what is included.
Octocopter
Brushless Gimbal with 120T motors
8x T-Motor 15.5 Carbon Fiber props
8x T-Motor U5 motors
3D Robotics Flight Control
3D Robotics GPS
3D Robotics Telemetry
8x T-Motor Brushless Electronic Speed Controllers
Taranis FrSky Radio Controller
3x 10,000 mAh batteries
AlexMos 32bit processor for brushless gimbal
Instruction manual for 3D Robotics Flight controller
Programmed transmitter
8x Custom Lightweight 500mm booms
8x Standard 550mm booms
4x backup 500mm lightweight booms
Lots of replacement parts.
Assembly DVD
The unit comes ready to fly, but there will be some basic assembling required. We will be disconnecting the booms for shipping, so some minor assembly will be required. This assembly is very simple, but if you don't feel comfortable we will be including an assembly DVD.
Booms:
We have made several high end upgrades to this system, one of which were custom commissioned booms. Currently on the octocopter are 500mm booms that were custom commissioned to be slightly thinner that traditional booms. This provides a total of 2/3 pound weight savings over the stock booms, which allows for longer flight times. Should you choose to use the stock booms, we are including those, which are 550mm booms. This upgrade alone is an $800 feature that we are including. We are also including 4 additional replacement lightweight booms.
Brushless Gimbal:
This is one of the best features of this copter. Unfortunately we never got around to fully assembly this portion of the copter. We are including the necessary components to assemble this including an AlexMos 32bit processor.
Additional accessories and replacements:
1 extra 15.5 carbon fiber prop
Lots of replacement parts, screws and connectors.
8x 550mm booms
4x 500mm custom commissioned lightweight booms.
The unit is in pristine condition, only flown twice! There are no visible scratches to nearly the entire unit save 2 props. There are small scratches on 1 or 2 props that seem to have happened in transport. It does not affect flight, and scratched props are something you can expect from flying anyways. A set of 2 new props would cost about $60.
We will not part this kit out, we are selling as a complete package. We will ship promptly once full payment is received. Insurance will be included in the shipping.
This is a professional unit and is not meant for beginners. A base of knowledge is required for a safe and successful flight.