I built this very small digital video assist capture/monitor setup in 2008 and used it on 3 studio jobs. The items are in very good condition and never abused, they are like new. The Datavideo QC DN-10 Deck is the new name for this machine, even though the actual machine was known as Nnovia QC A2D before Datavideo became the new company. This deck has analog pass thru for full time monitoring.
You can see current information about the deck here:
http://www.gdbint.com.au/Product.aspx?pID=352
The operators manual for the deck is here (PDF)
http://www.gdbint.com.au/ProDocuments/QCDeck_Operation_Manual_2.0.pdf
The media pack is included and is 100G. It has never been dropped or abused, never over 10G recorded to it.
The monitor is a Marshall V-LCD4PROL 4" LCD Monitor, with separate A/B inputs/output BNC connections.
You can see more information about the monitor here:
http://www.lcdracks.com/monitors/model/V-LCD4PRO.php
The box is made of MDF painted with hammertone black. It's a complete little combo unit, perfect for video assist capture and monitoring, with ability to feed other monitors using the pass through connection on the monitor. The size of the whole system is compact as you can see by the coffee cup in the photos. The monitor has no scratches and looks like new, as does the digital deck.
The system runs off 12V DC using a standard 4 pin XLR in the rear panel, operated by a lighted rocker switch. There is another pass through female XLR 4 pin DC jack for powering a speaker or other item off the same battery.
The red BNC cable and the 12V Power cable seen in the photos are not included.
Rear panel connections include:
L/R Audio input
L/R Audio output
Timecode input (Green)
Video Output (Blue)
Video Input (Go Green)
Firewire 400 output (hold menu on power up to use deck in disk mode) for transfer of files
Power switch and XLR 4 pin DC IN/OUT
It is perfect for doing video assist, adding a B/C camera monitor/record capability or however you want to use it. Car rigs, video cart, etc. Sound mixers could also use it for monitoring cameras and recording video if they desired.
$1200
Any questions please pm me. Thank you.
You can see current information about the deck here:
http://www.gdbint.com.au/Product.aspx?pID=352
The operators manual for the deck is here (PDF)
http://www.gdbint.com.au/ProDocuments/QCDeck_Operation_Manual_2.0.pdf
The media pack is included and is 100G. It has never been dropped or abused, never over 10G recorded to it.
The monitor is a Marshall V-LCD4PROL 4" LCD Monitor, with separate A/B inputs/output BNC connections.
You can see more information about the monitor here:
http://www.lcdracks.com/monitors/model/V-LCD4PRO.php
The box is made of MDF painted with hammertone black. It's a complete little combo unit, perfect for video assist capture and monitoring, with ability to feed other monitors using the pass through connection on the monitor. The size of the whole system is compact as you can see by the coffee cup in the photos. The monitor has no scratches and looks like new, as does the digital deck.
The system runs off 12V DC using a standard 4 pin XLR in the rear panel, operated by a lighted rocker switch. There is another pass through female XLR 4 pin DC jack for powering a speaker or other item off the same battery.
The red BNC cable and the 12V Power cable seen in the photos are not included.
Rear panel connections include:
L/R Audio input
L/R Audio output
Timecode input (Green)
Video Output (Blue)
Video Input (Go Green)
Firewire 400 output (hold menu on power up to use deck in disk mode) for transfer of files
Power switch and XLR 4 pin DC IN/OUT
It is perfect for doing video assist, adding a B/C camera monitor/record capability or however you want to use it. Car rigs, video cart, etc. Sound mixers could also use it for monitoring cameras and recording video if they desired.
$1200
Any questions please pm me. Thank you.
