Nice video demo of the Odyssey 7Q

Awesome. Thanks for the info.

Mitch how would you say the image is on the 7q, as compared to the DP7 pro? Same panel right? I have heard good things (finally) about the color/calibration accuracy in the DP7 specifically. Will the 7q ship calibrated or "pretty"?

Also, will the red file naming feature need to be updated every time red updates their firmware?

Thanks again
 
txdp said:
Awesome. Thanks for the info.

Mitch how would you say the image is on the 7q, as compared to the DP7 pro? Same panel right? I have heard good things (finally) about the color/calibration accuracy in the DP7 specifically. Will the 7q ship calibrated or "pretty"?

Also, will the red file naming feature need to be updated every time red updates their firmware?

Thanks again
Click to expand...

I cannot speak for another manufacturer's image quality, but I can note that even when using the same or similar components, results can vary. In our design we have excellent signal isolation and filtration, which keeps any noise from being introduced into the signal. We also have a very precise image callibration system at the factory, so the picture will be extremely accurate upon delivery. The color gamut of our display actually exceeds REC709 and is in fact DCI P3 compatible, so we will have both monitoring standards available. That is a HUGE deal for a product in this price range (which is the story I like to tell about ALL our features ;-D). We have monitor controls available so that you can muck it up to your heart's content, but then there is a RESET which takes it back to our profile. And we have a program for returning your Odyssey back to reference spec should it shift out over time. If we cannot reset it, which would take a LOT of burn hours on the panel, then a replacement screen with a full rest calibration will be only about $350.

I believe RED's naming protocol has not changed in some time, so it should not be an issue. Still, I cannot speak for another company as I am not privy to their future plans. If they change their naming convention protocols, we will update as soon as we can.
 
All great news, this is seeming like the one to buy!

Final question, is there a 5v 1amp usb power out for Parralinx arrow?
 
There is a USB port on the Odyssey, designed for plugging in for firmware updates and diagnostics. I'll have to check if it can provide enough juice for a Paralinx Arrow receiver (5v, 2amp). Several of the battery plate accessory makes will have P-Tap or other secondary power outputs, which would be perfect for powering these devices with the voltage regulating cable provided from Paralinx. Also works with the Teradek Bolt and other systems.
 
I see you noted 5v 1amp, not 2amp. I thought the transmitter was 1amp and the receiver 2amp, or do I have it backward? Or did you wish to use the Odyssey7Q as an onboard monitor and stick the transmitter onto it to send out to video village?
 
Last edited:
Correct, I want to transmit from the monitor. So I could go sdi into monitor, hdmi out has the arrow transmitter plugged in, and a short cable from USB port to the arrow transmitter. Simple, clean. The odyssey is a recorder and now a neat and tidy uncompressed transmitter with LUT applied. This would be badass.
 
I have to check on what that USB port can handle. Otherwise you can power from the battery as I mentioned. Bonus: The USB and the HDMI Out ports so happen to be right next to one another on the right side of the Odyssey (screen facing you).
 
Hi Mitch,

Can the image on the 7Q be flipped upside down so the monitor can rotated? That would be really useful for certain rig setups.
 
I may have missed it, but i wonder what sort of battery life one could expect if they're using a Sony NPF-970 battery to power the monitor/recorder.

Any ideas?
 
To the USB power question for a Paralinx transmitter: No, but yes.

Our USB port will not put out the juice for the power. It was never meant for that. However, we do have our Remote port, just a couple of inches south of it. That port can output the 5v 1amp needed to power a Paralinx Arrow transmitter. We can make you a custom cable for a few hundred dollars or you could have one made by your local shop.
 
A Sony NPF-970 is rated for 47.5 watts. At absolute maximum power draw(like when recording high frame rates), the Odyssey7Q draws less than 15 watts. So you should get at least three hours out of one 970 brick. In most modes the Odyssey7Q draws more like 8-10w, so we're probably talking about something more like five hours. The device is very power efficient.
 
Mitch Gross said:
A Sony NPF-970 is rated for 47.5 watts. At absolute maximum power draw(like when recording high frame rates), the Odyssey7Q draws less than 15 watts. So you should get at least three hours out of one 970 brick. In most modes the Odyssey7Q draws more like 8-10w, so we're probably talking about something more like five hours. The device is very power efficient.
Click to expand...

Thanks so much for the information, Mitch. You guys have been excellent, keeping us all informed here about such an exciting product!
 
mitch gross said:
to the usb power question for a paralinx transmitter: No, but yes.

Our usb port will not put out the juice for the power. It was never meant for that. However, we do have our remote port, just a couple of inches south of it. That port can output the 5v 1amp needed to power a paralinx arrow transmitter. We can make you a custom cable for a few hundred dollars or you could have one made by your local shop.
Click to expand...

nice
 
Mitch Gross said:
A Sony NPF-970 is rated for 47.5 watts. At absolute maximum power draw(like when recording high frame rates), the Odyssey7Q draws less than 15 watts. So you should get at least three hours out of one 970 brick. In most modes the Odyssey7Q draws more like 8-10w, so we're probably talking about something more like five hours. The device is very power efficient.
Click to expand...

This is way too awesome for people like me who love a light setup. Super awesome!
 
How about this for awesomesauce:

- Odyssey7Q runs less than 15w and accepts 6.5-34v range.
- Teradek Bolt receiver runs 6w and accepts 6-28v range.
- Odyssey7Q INCLUDES FOR FREE Multi-Stream viewing mode, which means you can view up to FOUR HD video feeds simultaneously on a quad-split view (or scroll through the four images).
- An Odyssey7Q with a pair of Bolt receivers draws about 27w, so it can run off a single NPF-970 for almost two hours continuously (perhaps more--I think the Multi-Stream viewing isn't too power hungry). And the combined weight including battery and mounting is maybe 2.5lbs.

A multi-camera Director's handheld monitor.

Pay for the Multi-Stream recording option coming in the beginning of the new year and you can record each signal in full HD and even get a LIVE SWITCHER to make a rough cut on the fly, complete with EDL.

Amazeballs.
 
The Multi-Stream functionality may very well be the biggest hidden gem of the Odyssey7Q.

That is, until we enable some of the secrets we have coming. ;-D
 
You must log in or register to reply here.
Back
Top