NEW indiSLIDER 99 Bucks

In terms of the indi slider mini, will my XH-A1 be like a sumo wrestler sitting on the back of a little pony? Or will I be able to get by with that big of a camera?
 
I have one coming that I am testing. I gonna see if it can take an HPX/rails/LEX/ lenses.

I will keep you guys posted after my tests.
 
Just an update. I emailed the company directly and received an answer almost immediately. They say it's fine for a larger camera with adapter and even forwarded me the following pic. I ordered one today so I'll let you know what I think when it comes.
 

Attachments

  • DSC_2218.jpg
    DSC_2218.jpg
    100.1 KB · Views: 0
I got mine yesterday, it's sweet!

Since I'm using a larger setup (DVX/HVX+), I ended up tightening the carriage down for more resistance. This also eliminated the tiny wiggle the carriage had on the slider. I'm not 100% sure I'd put my adapter on here. I wouldn't walk away from it if I did, its alot of weight on a tiny base plate, but it might be okay. I'm pumped to say it should be PERFECT for my scarlet when I get it. The track part also has pre-drilled holes at both ends so it can be mounted between two tripods if necessary. Tim, you did it again bro -- sick

I love the fact that everything is allen keyed so its easy to rip apart or adjust stuff.

My only issue is that the base plate piece has a built in screw that likes to loosen up on its own. I may pull it out and put in a normal screw I can actually torque it down. I think what causes this is that there is no guide peg to keep the cam from rotating.

I recommend it guys.
 
Just an update. I emailed the company directly and received an answer almost immediately. They say it's fine for a larger camera with adapter and even forwarded me the following pic. I ordered one today so I'll let you know what I think when it comes.
Attached Thumbnails
Click to expand...
Hey that's my rig. I am glad someone posted this.

It does work well. HOWEVER. Your rig must be balanced front to back. It might take some adjustment and I ,like others said, would not leave this unattended on a tripod, but it does work well. Just know its limitations and treat with respect.

This thing absolutely rocks with the bare HPX170. Its quick so quick to set up.
 
Last edited:
I have not tried it with an adapter yet but with the stock hmc150 it's sick. Very easy setup and smooth. I will give it a go with the Letus soon but I really can't wait to try it when I get a GH1. That should be one hell of a compact combination.
 
Yeah ZaZa I was going to point that out as well...it's just some 80/20 stuff...carriage looks nice though. Not sure if you can just buy a few pieces from 80/20 so modifying and reselling isn't that big of a deal...good use of it actually.

Seems like it's great stuff, a friend showed me some things he's built with 80/20 and it seems pretty great.

I'm sure the slider functions well and $99-169 isn't too bad.
 
Jason, is that indiMount removable from the carriage? How does it attach?
Click to expand...
it attaches with what looks like a 2 inch hockey puck. It can quick release on and off the slider, but you will have that not standard proprietary puck attached. However you could get a quick release for it and hop right off your tripod to the slider.

Its pretty easy to use. Even changing from tripod plate to Indi mount (puck) its still faster set up then the traditional Indislider.
 
jason.adams said:
Hey that's my rig. I am glad someone posted this.

It does work well. HOWEVER. Your rig must be balanced front to back. It might take some adjustment and I ,like others said, would not leave this unattended on a tripod, but it does work well. Just know its limitations and treat with respect.

This thing absolutely rocks with the bare HPX170. Its quick so quick to set up.
Click to expand...


My slider came in on the 25th and so far it's been a good budget investment. And yes, balancing is key. Slightly tighter tolerances between the slide pads and rail would reduce the wobble. For some reason the slide pads were loose on mine, causing undesirable wobble but once snugged, reduced wobble enough for stable slides.

The pistol grip is awesome for leveling the camera quick but is not recommended for heavy rigs. Just to try, I threw my GH1 (mounted on the indiRAILSpro XVsm and Cavision matte box) onto the slider and pistol grip and almost crapped my pants when the pistol grip tilted forward due to the excess weight. I assumed that would happen but confidently pulled my hands away 2 inches too far thinking the grip was actually holding the rig securely when suddenly it gave.

I highly recommend a disclaimer stating not to combine a heavy rig with the pistol grip. Though most competent camera guys should know the limitations of a pistol grip, someone else may not be aware. I tried it just to test the weight limit.

I've never used premium sliders so I can't compare smoothness or tolerances between $300+ vs $99 sliders.

Basic instructions would've been nice indicating what's included and what not to do. Maybe a few pointers on how to finesse the slider. It's pretty intuitive but practice and trial/error is key to finding the smoothest shot.

Either way I love it but wish the table legs were taller or height adjustable since the tripod release plate I use is thicker than the height of the legs. This causes the slider to teeter totter on the plate when pulled off tripod and surface mounted. I guess I'll add thicker rubber feet for the cure.

One other note not directly slider related. I tried the slider and rig on a velbon fluid head and encountered a bit of teeter due to the flex of the release plate even with this short 24'' rail. A quality head will reduce any teeter.

Definitely a great product!
 
Last edited:
I am new to sliders.

What kind of video tripod do I need? I want to use the cheapest and/or lightest wobble-free tripod.
 
Hey Folks,

I posted something to the effect of "Somebody point this no talent wannabe to information about what a slider is".

Apparently some did not understand I meant the comment to refer to myself. I apologize if anybody was offended. I frequently make fun of myself.

So where do I find out about uses for sliders?

Thanks,
Robert A. Ober
 
Hey Folks,

I posted something to the effect of "Somebody point this no talent wannabe to information about what a slider is".

Apparently some did not understand I meant the comment to refer to myself. I apologize if anybody was offended. I frequently make fun of myself.

So where do I find out about uses for sliders?

Thanks,
Robert A. Ober
Click to expand...

The use for a slider is simple. It is a device used to produce linear camera moves.

just go to www.vimeo.com and search indislider and you will find a ton of videos and reviews.

Its basically a dolly replacement for short (24-36" camera moves)
 
I wanted to buy one but they haven't responded to any of my emails for a few days now.

The lack of communication doesn't appeal to me at all.

I am now looking at the glidetrack or pocket dolly. Any other alternatives?
 
Retrospective said:
I wanted to buy one but they haven't responded to any of my emails for a few days now.

The lack of communication doesn't appeal to me at all.

I am now looking at the glidetrack or pocket dolly. Any other alternatives?
Click to expand...

Call him....He's a good guy, and is more then willing to answer questions over the phone. I've sent him a couple E-mails in the past and they NEVER get replied to....but everyone I've read about that has called him has been very happy...so forget E-mail and pick up the phone.:thumbup:
 
Nick Walters said:
Call him....He's a good guy, and is more then willing to answer questions over the phone. I've sent him a couple E-mails in the past and they NEVER get replied to....but everyone I've read about that has called him has been very happy...so forget E-mail and pick up the phone.:thumbup:
Click to expand...
Thanks, he did message me. Just ordered it now! :) He's a busy guy, hopefully he can get some help to run his business.
 
You must log in or register to reply here.
Back
Top