Lowel questions

G

Gweilo66

Well-known member
Have an omni stand whose top section won't tighten enough. Nothing obviously different from other sections. Nothing appears cracked. Is it just a matter putting a different washer in the tightening part?

Have a Prolight supposedly wired for 30v..has funky collared circular connector. Can I change this to AC by simply putting a regular AC plug on and putting an appropriate bulb in?
 
Last edited:
Gweilo66 said:
Have an omni stand whose top section won't tighten enough. Nothing obviously different from other sections. Nothing appears cracked. Is it just a matter putting a different washer in the tightening part?

Have a Prolight supposedly wired for 30v..has funky collared circular connector. Can I change this to AC by simply putting a regular AC plug on and putting an appropriate bulb in?
Click to expand...

Lowel answers their phone with a real human being. Ask for the parts guy and he'll walk you through the answers.
 
Lowel has a repair parts guide on their web site. You can order repair parts directly from them or buy the parts from a dealer.

You can remove the 30v bulb from the Pro-light and install a 120v bulb (or a 240v bulb or a 12v bulb). Loosen the small knob on the top of the Pro, and the front housing should come off.

Is the 30v connector "hard-wired" to the Pro-light? It might just be an adapter that is plugged into the end of the cord. If so, just unplug the adapter.
 
You must log in or register to reply here.
Back
Top