How to output kona card to television set?

ShamrockFilms

ShamrockFilms

Well-known member
I have a Kona card and AJA breakout box.

How do I analog out from the breakout to my analog VTR?

The VTR has S-Video in and audion ins and outs.
 
Last edited:
Which Kona do you have? What footage are you working with?

IF HD, then in the Kona Control Panel, set the secondary output to be a downconvert 525i and set it to your COMPOSITE cable. Then the cable should connect to the deck. The deck has a composite in, right? If not, you'll need a composite to S-video adapter.

If SD, then set secondary output to Composite (no need to downconvert) and then the same thing.
 
AJA Kbox
Kona 2 card
DV 720x480 from FCP

I have no idea which pluggy thing is the Composite on the kbox! haha. There's a section on the kbox that reads "Video Monitor Out" and under that are 3 RF connfections that read Y/G/CVBS Pb/B/Y Pr/R/C
So, I'll need to go from the composite to the S-Video in the Television? I looked for hours on end online and AJA website, no directions for this I could find.
 
You might need a special cable... ProMax sells one. If indeed this is the case. But I don't know.

Sorry -- I'll go hide again...

Slinking off....

CaptM
 
Okay cool. Now I know what to plug into (Y/G/CVBS).
What's an RGB though?

Do I need an RGB to S-Video?

Does audio go in the TV by S-Video or do I need to audio out from the Kbox to the audio in the TV? There's RCA audio outs on the Kbox.
 
Last edited:
BNC to S-Video? Hmmm...haven't seen that. BNC to RCA, then RCA to S-Video...

Audio needs to come from the RCA outs on the KBox
 
You must log in or register to reply here.
Back
Top