HD monitor for 7D and EX-1R

P

Peter Reynolds

Well-known member
I'm looking for an HD monitor for my Canon 7D.

I found a used Ikan V8000 with just HDMI input for $700

I'm looking to buy a Sony EX-1R in December and I'm wondering if I can use the Ikan
monitor with it. From my research, it seem like I'll need an HDMI - HD-SDI cable or
something similar.

Does this make sense? The cost for a monitor with both HDMI and HD-SDI are very
expensive so I'm hoping this will be a cheaper alternative.

Thanks.

P.
 
Well, more research has revealed that there are solutions, like the Nebtech HDMI-SDI coverter box, but at $495 it's more expensive then getting an monitor
with both HDMI and HD-SDI. http://www.nebtek.com/proddetail.php?prod=408-HDMI-SDI&cat=46

More research is required, but another option might be to use the HDMI with the 7D, but use the component out with the EX-1R. Is that good enough quality
though for monitoring the EX-1R signal?

Again, any advice or thoughts anyone was would be appreciated.

Thanks.

Peter
 
Well. I guess I'm alone in having this dilemma.

I can only assume that people are fine with HDMI only and using it with their DSLRs

OR

They've got deep pockets and have shelled out for a top of the line Marshall with both HDMI and HD-SDI.

Decisions, decisions...

I'll be sure to keep you all updated on my final purchase.

P.
 
I cant add a lot but to check out SMall HD

even though I have an EX I have never hooked it up yet

I use component with the 5d and hdmi with the 7d

to me on a DSLR res is important in a monitor, less so on a small chip cam where focus is less crucial,
 
Thanks Sam. That does make sense. I need the resolution for critical focus with the 7D, so HDMI is important. But with the EX-1
it's more about framing, so using component should be fine.

It would be interesting to hear from someone who uses component with an EX-1. Is it acceptable resolution?

I've heard good things about the SmallHD. I actually just saw two demos on Vimeo.
Hands On http://vimeo.com/14871550
Walk through http://vimeo.com/14877193

Costs for Ikan/Small HD seem to be about the same. Around $1000 for HDMI only and $1300 for HDMI & HD/SDI.

The only difference being that if I buy Ikan, there are dealers here in Toronto. SmallHD I can only order online. As good as
the Vimeo videos are, with a purchase of that size I like to see it in operation for myself.

P.
 
Honestly - you are going to want to get the SmallHD. They have great customer service. Their products are getting better through firmware updates, and just trust me - they are great. I'm sure they have a fair return policy if you hate the thing.
 
Go with the small HD or Lilliput for a very cheap option. I cannot recommend the Ikan. I have found problems with the reliability of ikan.
 
The downers on the small HD are - BTW I have the DP1X not the new one

The screen is reflective - you need the shade and will struggle on a steadicam

The voltage input, check this spec, For the DP1x it is 12 exactly

I think the new one is 11-14 or wider

This is important if you use VLock power because you need a regulator in the mix

You may want to test the HD marshall monitor, with a transflective screen , but you are jumping up another price step

What I have done is ordered an SD Transvideo 5 inch for using in the sun - costly small and SD, but bright - for steadicam, no focussing

Generally I think SmallHD are getting thier sh1t together and are THE 'budget' solution

This thread http://www.steadicamforum.com/index.php?showtopic=12722 specifically dwells on brightness but you can read some comments on the Marshall

The SD transvideo is no good to focus, the HD transvideo is $7k !

S
 
Hi Clos.

I purchased the 5" Marshall monitor. It's really great. False colour and focus assist have been really helpful.

The downside is that it's a battery hog and only takes double A batteries. 4 double AAs are drained in just over a hour!

Luckily, 90% of my shooting is in studio so I just plug into AC. I've been looking at having an adapter installed locally
so the monitor will take Canon batteries, but it hasn't been necessary so far.

P.
 
You must log in or register to reply here.
Back
Top