Hi Everyone, hoping someone can help me here, it takes a bit of explaining so hopefully you can follow.
I'm thinking of selling my HC-X1000 - it has only 94 hours runtime and spent a couple of years sat, very carefully, stored away in a cupboard when I went travelling. It's in immaculate condition.
Anyway, I thought I'd better test everything was working as expected before I put it up for sale (I have never had any issues with this camera before). However, upon testing the mains adapter, the camera didn't seem to power on. I've never used the mains adapter really, always used batteries, so this could have always been an issue and I've never noticed.
I thought it must be the adapter, so I tested it with a multimeter and it is outputting the required 12v. So it's not that - it must be the camera.
This is when things got weird....
When I powered it on WITH the battery, it detected the DC power. The battery symbol vanishes from the display to indicate this.
I could then remove the battery with no problem and the camera remains powered on using the mains power.
If I then powered it off (with the battery still removed) - I couldn't power it back on. It sort of tries to power itself on, but just turns on and off repeatedly, the power LED blinks slowly and gets quicker and quicker until it doesn't turn on at all. Sort of like when you drop a ball, the time between each bounce gets less and less until it just stops bouncing. It's as if the camera is using up some kind of residual power from a transformer.
When I put the battery back in, with DC connected, it powered itself on straight away. Then, I left it for a while and hey presto - things started working as expected again - I could turn it on and off just using DC power.
Or so I thought..... it's now back to not recognising the DC power at all.
There is clearly something wrong with it. I see my options as follows:
- Send it off for repair, where I imagine it is likely to cost in the region of £300 upwards
- Try to fix it myself
- Sell it as faulty
So, if I attempt to fix it myself, does anyone know what the fault might be? Or do you think cut my losses and sell it as faulty? It still works just fine with battery power, but I imagine I will lose a lot on it.
Thanks for reading and sorry it was so long!
I'm thinking of selling my HC-X1000 - it has only 94 hours runtime and spent a couple of years sat, very carefully, stored away in a cupboard when I went travelling. It's in immaculate condition.
Anyway, I thought I'd better test everything was working as expected before I put it up for sale (I have never had any issues with this camera before). However, upon testing the mains adapter, the camera didn't seem to power on. I've never used the mains adapter really, always used batteries, so this could have always been an issue and I've never noticed.
I thought it must be the adapter, so I tested it with a multimeter and it is outputting the required 12v. So it's not that - it must be the camera.
This is when things got weird....
When I powered it on WITH the battery, it detected the DC power. The battery symbol vanishes from the display to indicate this.
I could then remove the battery with no problem and the camera remains powered on using the mains power.
If I then powered it off (with the battery still removed) - I couldn't power it back on. It sort of tries to power itself on, but just turns on and off repeatedly, the power LED blinks slowly and gets quicker and quicker until it doesn't turn on at all. Sort of like when you drop a ball, the time between each bounce gets less and less until it just stops bouncing. It's as if the camera is using up some kind of residual power from a transformer.
When I put the battery back in, with DC connected, it powered itself on straight away. Then, I left it for a while and hey presto - things started working as expected again - I could turn it on and off just using DC power.
Or so I thought..... it's now back to not recognising the DC power at all.
There is clearly something wrong with it. I see my options as follows:
- Send it off for repair, where I imagine it is likely to cost in the region of £300 upwards
- Try to fix it myself
- Sell it as faulty
So, if I attempt to fix it myself, does anyone know what the fault might be? Or do you think cut my losses and sell it as faulty? It still works just fine with battery power, but I imagine I will lose a lot on it.
Thanks for reading and sorry it was so long!