Good Printer for printing labels on DVDs and Blu Rays?

Jonathan L Roberts

Active member
Several months ago I got the Canon MG5420 printer. It print labels pretty good for one client. However, It has been acting up and the printing program sucks ( Garden software ). Is there any printer that prints good cd/dvd/bluray labels that has a good software? Thank you.
 
Paper peel off labels or direct to disk? I only print direct to disk and I use Epson printers for that. I currently use the Artisan 1430 series printer. I have not done paper labels in years because I believe the unbalance the disk and if they get wet, it's even worse.
 
For the highest level, one of the few dye-sublimation printers is what you want. After that you might be almost limited to Epson for inkjet, or one of the expensive industrial inkjet disk printers/duplicators.
 
Paper peel off labels or direct to disk? I only print direct to disk and I use Epson printers for that. I currently use the Artisan 1430 series printer. I have not done paper labels in years because I believe the unbalance the disk and if they get wet, it's even worse.

Sorry there brother. Meant direct to disk using white blank inkjet.
 
For the highest level, one of the few dye-sublimation printers is what you want. After that you might be almost limited to Epson for inkjet, or one of the expensive industrial inkjet disk printers/duplicators.

What's a good Espon printer that prints labels directly that won't break the bank and has a good program?
 
When printing with an inkjet printer I find that the silver-matte disc blanks produce the nicest looking end result ( they don't look like they were made on an inkjet ), where sometimes the white discs look like they were inkjet printed.
 
Any of the Epson Workforce with 3 colors and black would be just fine. The included software is decent, but you can usually find a photoshop template on the web that will allow more in depth image work and then just make the correct setting in the print driver and print like a piece of paper from Photoshop. You can even do a custom profile for the disks you are using, but few people do this anymore.
 
Any of the Epson Workforce with 3 colors and black would be just fine. The included software is decent, but you can usually find a photoshop template on the web that will allow more in depth image work and then just make the correct setting in the print driver and print like a piece of paper from Photoshop. You can even do a custom profile for the disks you are using, but few people do this anymore.

I did that with Canon printer I had though and it gave out a horrible print. Would you direct me to one you recommend?
 
I've owned two Epson Artisans and Two Canon Inkjet printers (I just threw away my MG5420) for the purpose of printing on DVDs. There are more professional Canon printers that will print on DVDs but you will have to pay for tons of ink, spend a lot on the printer, and you have to use your ink consistently (the ink goes bad in 6 months). Here are some things I've learned over the years:

- These printers go bad every couple of years and you will have to replace it. They aren't worth fixing, just buy a new one for around $120

- Use your printer at least once a week. Otherwise your print heads could dry up and you will have to perform a cleaning which ultimately ruins your printer.

- Don't use generic ink. Even if it is recognized and doesn't clog your heads, the color accuracy is never good with generics.

- Create your DVD artwork in photoshop using a template and use image garden to import your artwork, nothing else.

- Fine tune the inner and outer diameter settings for the specific DVDs you are using.

- Silver printable DVD's look cool but white printable produce much sharper results.

- I only trust verbatim DataLifePlus Media
 
I've owned two Epson Artisans and Two Canon Inkjet printers (I just threw away my MG5420) for the purpose of printing on DVDs. There are more professional Canon printers that will print on DVDs but you will have to pay for tons of ink, spend a lot on the printer, and you have to use your ink consistently (the ink goes bad in 6 months). Here are some things I've learned over the years:

- These printers go bad every couple of years and you will have to replace it. They aren't worth fixing, just buy a new one for around $120

- Use your printer at least once a week. Otherwise your print heads could dry up and you will have to perform a cleaning which ultimately ruins your printer.

- Don't use generic ink. Even if it is recognized and doesn't clog your heads, the color accuracy is never good with generics.

- Create your DVD artwork in photoshop using a template and use image garden to import your artwork, nothing else.

- Fine tune the inner and outer diameter settings for the specific DVDs you are using.

- Silver printable DVD's look cool but white printable produce much sharper results.

- I only trust verbatim DataLifePlus Media

I imported it from photoshop and it still prints like crap. If Espon printers cost more but less expensive in ink and have great results, I'll buy that instead of a Canon again.
 
I'm not sure if they are less expensive in ink as I have a feeling
every single manufacturer rapes you on the ink. But I will say,
my disks look awfully good after I print on them, so I'm generally
pretty happy with my Epson.
 
I'm not sure if they are less expensive in ink as I have a feeling
every single manufacturer rapes you on the ink. But I will say,
my disks look awfully good after I print on them, so I'm generally
pretty happy with my Epson.

Holy crap Epson Artisans are EXPENSIVE! WOW! I don't wanna' pay almost 200+ just for a printer that prints DVDs and CDs. Is there another option? lol. But if there isn't one, I'll bite the bullet and get one. It'll probably boost my marketing up though and get more clients.
 
Back when I was doing heavy corporate work I had an area set up with 3 older computers and 3 Epson printers. Once discs were out of the duplicator I would run them nonstop through the 3 printers.

I'll be honest.... I am glad most of my work now is broadcast, as I have only burned 4 discs in the last 2 years. I do not miss burning and printing discs!
 
If all your discs are just for client approvals and that sort of thing instead of custom dupes for each unique project there is another option. You can get your blanks preprinted and just fill in the details with a sharpie. I did this for years with a design that had a white space to write in the title and date. Silk screened blanks with just the title written on them were way faster than printing an entire disc. My business was a lot of rush work so we didn't have time to wait for a couple discs to run through the printer. Burn, write down the title, run to Fedex!
 
Back
Top