Getting Line In audio

[AdobeCS]

I just wanted to make sure, but I wanted to hook up my recorder into the mixer (so the line-in port on my recorder) at an event to get the audio feed. Would I be plugging it in through this RCA Audio Out here:
http://www.crestron.com/resources/p...e_catalog/default.asp?jump=1&model=DMC-C-DSP#

I'm getting a little mixed up with the audio ins/outs ! What port should I be looking for?

 

[Richard Crowley]

We could probably help you if we knew what recorder you are talking about.

But generically speaking....
The line outputs in that photo appear to be the kind you could expect to feed into line inputs on a recorder.

 

[AdobeCS]

Sorry, I will be using a Sony PCM-M10.

 

[Richard Crowley]

The photos I find online show that a Sony PCM-M10 has a 3.5mm stereo mini-phone jack on the top for LINE INPUT.



That Crestron gadget appears to offer line-level stereo output from the pair of RCA jacks.
From that evidence, it appears that you need a simple cable like this....

http://hosatech.com/product/cmr-200/



Of course, that Crestron gadget is only a small part of a larger, custom-programmable system. So While the Crestron gadget has the potential of sending a stereo line-level mix out of those RCA jacks, it is up to the operators of the system to program and operate the system to actually SEND the desired signal to that output.

If it were me, I would arrange an advance meeting with the venue operators and organize a test to confirm end-to-end integrity.