GH5 For the life of me I cant balance GH5+10-25mm F1.7 Leica on Ronin SC.

CustomerGH4

Well-known member
Ronin sc is stock the cheapest version. The lens is so heavy that it always tilts forward even if the plate is maxed out on the heavy side.
Is it even possible to balance that combo on Ronin SC,, or should I have gotten Ronin S instead? Or maybe there is a possibility to order some counterweights?

Please help me anyway you can!
 
Are you using the stock or extended lens support?

You should be under the 4.4lb SC limit with that combo, but it's probably still too much for it. Any counterweight would put you over the limit which doesn't necessarily mean it wouldn't balance but the motors would be working hard.

The S version or any other beefier gimbal could handle that.
 
Sounds like you need some sort of cheese plate, extension plate to get the camera further back on the unit?
 
Are you using the stock or extended lens support?

You should be under the 4.4lb SC limit with that combo, but it's probably still too much for it. Any counterweight would put you over the limit which doesn't necessarily mean it wouldn't balance but the motors would be working hard.

The S version or any other beefier gimbal could handle that.

Yeah Im using the stock lens support, and to be honest its counter effective since the support adds weight to the lens side lol.. Umm, are you telling me there is an extended version of it available that might be better?
 
Sounds like you need some sort of cheese plate, extension plate to get the camera further back on the unit?

Where might I get it? Im totally bummed about it right now.. I hustled all day yesterday until my t shirt was all sweaty and still no go..
My dream was to use the 10-25 because it offers 10mm which is then the widest I have

EDIT: DARN IT; IVE NOW OPENED UP THE SC COMPABILITY LIST AND 10-25mm IS NOT IN ONE OF THEM, so it means I cant balance it no matter how I TRY??
 
There is an extended one but it wouldn't help.

Maybe try this: https://www.bhphotovideo.com/c/prod...ig_bss2420b_counterweight_mounting_plate.html

Great design because if using the plate alone isn't enough you can screw in counterweights to it on the bottom/sides. Maybe even just one or two 1/4-20 screws you may have laying around might be enough to tip the scale back (if not, you'll need to purchase counterweight separately).

https://www.bhphotovideo.com/c/prod...9_counterweight_for_dji_ronin_s_ronin_sc.html

And there are many different cheeseplates and risers that could help lift and offset/slide the camera back a bit more, but if you use the gimbal a lot then I'd sell it and invest in something bigger, if possible.

Even if you can balance it, its performance may be questionable with the weight limit.
 
There is an extended one but it wouldn't help.

Maybe try this: https://www.bhphotovideo.com/c/prod...ig_bss2420b_counterweight_mounting_plate.html

Great design because if using the plate alone isn't enough you can screw in counterweights to it on the bottom/sides. Maybe even just one or two 1/4-20 screws you may have laying around might be enough to tip the scale back (if not, you'll need to purchase counterweight separately).

https://www.bhphotovideo.com/c/prod...9_counterweight_for_dji_ronin_s_ronin_sc.html

And there are many different cheeseplates and risers that could help lift and offset/slide the camera back a bit more, but if you use the gimbal a lot then I'd sell it and invest in something bigger, if possible.

Even if you can balance it, its performance may be questionable with the weight limit.

woah, thanks for the links!
 
Back
Top