F55: F55 and Fuji 20-120 Zoom, incorrect lens data

[Straw Man]

Hoping someone can help -

Currently have a Fuji Cabrio 20-120 zoom on the F55. Lens is powered through the mount, zoom and rec trigger are working, but T stop data is incorrect. The lens is set to T3.5, but in the viewfinder the F55 says the lens is T5.6. Anyone know how to fix?

 

[Run&Gun]

If you haven't already, try switching the lens type in the menu. WIth my 17-120, it's set to Type C, because they use the Cooke i-data protocol. Not sure if Fuji uses the Cooke of Arri protocol. I've shot with the 20-120, but it was on an Amira, not my 55.

 

[Donny 123]

Presuming same as the other cabs.. 19-90 etc..

f55 lens interface set to type C ..Cooke

Dip switch on lens.. S2 set to off. (its under a rubber flap front of the servo motor hand grip

 

[Straw Man]

Thanks all. Ended up needing to run a full initialize once all other dip switches were set correctly. For anyone else who may come by this...

Power up camera while holding VTR+RET on servo, keep holding until zoom wheel initializes then release. Allow lens to work through zoom/focus/iris initialization, LED on front will go out once process is done. Power off camera and power back on. Lens should now be talking correctly with F55.