F3 Video outputs question

M

MediaGen

New member
Hello,
As a brand new F3 owner, I have a question about the outputs.
I am sending the HD-SDI output to my Atomos Samurai,
and the HDMI output to my SmallHD DP4 EVF.
I also want to be able to send another HDSDI signal to
a director's monitor.
My question is will either of the A/B connectors give me that
option? I have tried, but get nothing out of them.
Non S-Log set-up.

Thanks

Peter
 
You will also need the newest firmware version 1.31 for the A/B Output to work as well. As Douglas said connect the Samurai to the A output. Client or Director monitor to the Regular SDI out.
 
Thanks for those 2 answers. I have FW 1.31 already installed..
I get "no signal" message on the Samurai when connected to the A output.
Perfect signal out of the HD-SDI, so I know Samurai and all cables are OK.
Any other suggestions?
Peter
 
Have you enabled the Dual-Link in the Menu. Under Video Set go to Dual-Link & Gamma Select. Set it to 1.5 YPbPr 422 & Video.
 
That was it. I had just not scrolled down far enough in the menu to find
the Dual-Link Settings. Thanks very much.

Peter
 
You must log in or register to reply here.
Back
Top