We've been happy with our EX1R once we learned picture profiles better (and I spent several hours with the camera, an HD CRT, and scopes).
However we sometimes get a pasty, flat, almost solarized look on faces. I basically have to underexpose a bit, otherwise it quickly shows up. Doing a bit of inspection, I found out that the red channel gets completely saturated, so while the overall exposure is still valid, it's not in the reds.
That'd explain it, the question is, do you have suggestions how to tame it down?
PP settings I use are below. While those settings don't have to be legal, they are intended to 'get the look in the can'.
(One idea I've already found out is to switch STD3 gamma over to Cine2 or Cine4.)
[TD="width: 114"]Faces[/TD]
[TD="width: 114"]Faces2[/TD]
However we sometimes get a pasty, flat, almost solarized look on faces. I basically have to underexpose a bit, otherwise it quickly shows up. Doing a bit of inspection, I found out that the red channel gets completely saturated, so while the overall exposure is still valid, it's not in the reds.
That'd explain it, the question is, do you have suggestions how to tame it down?
PP settings I use are below. While those settings don't have to be legal, they are intended to 'get the look in the can'.
(One idea I've already found out is to switch STD3 gamma over to Cine2 or Cine4.)
| NAME: | ||
| MATRIX | On | On |
| Select | High SAT | High SAT |
| Level | 20 | 0 |
| Phase | 0 | 0 |
| R-G | 0 | 0 |
| R-B | 0 | 0 |
| G-R | 0 | 0 |
| G-B | 0 | 0 |
| B-R | 0 | 0 |
| B-G | 0 | 0 |
| COLOR CORREC. | Off | Off |
| WHITE | ||
| Offset White | Off | Off |
| Preset White | 5600 | 3200 |
| DETAIL | On | Off |
| Level | -40 | - |
| Frequency | 15 | - |
| Crispening | -20 | - |
| Sharpening | 0 | - |
| H/V Ratio | 0 | - |
| White Limiter | 0 | - |
| Black Limiter | 0 | - |
| V DTL Creation | Y | - |
| Knee APT Level | 0 | - |
| SKIN TONE | Off | On |
| Level | - | -25 |
| Area Detection | - | - |
| Area Indication | - | Off |
| Saturation | - | 0 |
| Phase | - | 118 |
| Width | - | 40 |
| KNEE | On | - |
| Auto Knee | On | - |
| Point | - | |
| Slope | - | |
| Knee SAT Level | 50 | - |
| GAMMA | ||
| Level | 0 | 0 |
| Select | STD3 | CINE4 |
| BLACK | -9 | 0 |
| BLACK GAMMA | 0 | 0 |
| Low Key SAT | 10 | 0 |
[TD="width: 114"]Faces[/TD]
[TD="width: 114"]Faces2[/TD]
