Cool Shotgun I picked up!

I bought a cheap XLR to XLR 20 foot cable. Guitar Center had them on sale for 6.99 Pulled the UA-3-14 connector off the back of the mike and saw that pin 1 went to chassis ground, red went to pin 2 and black went to pin3. Measured the pin dia of both mic connector and XLR cable, both are 0.093. Pin spacing looked to be the same. Removed the metal cover and pried the metal shield off of the front of the XLR connector. Just a little work with a file on the plastic barrel and the connector slid onto the mike like it was made for it. Tested it with my Tascam DR100 and it works! I had the mic sitting on a piece of bubble wrap on a cardboard box about 6 feet from me. Not the best setup. Next thing to do is finish up my shock mount. I'm going to order some 1/8 and 5/32 o-rings of different sizes to see what works best.
Bill Wojo
 
Back
Top