Kellen Moore
Member
****PERFECT CONDITION- Purchased off a B&H ONLY FOUR months ago- USED ONCE****
FOR SALE- Complete lighting set (CURRENTLY OUT OF STOCK ON B&H). This was purchased off B&H PHOTO only FOUR MONTHS ago and it was only used ONCE!
The entire kit is in PERFECT CONDITION and is the perfect set for anyone interested in photography and creating their own home studio.
This set comes with THREE LIGHTS, THREE BOOM POLES, UMBRELLAS, and a wireless set up so control the FLASH on THREE LIGHTS so it is synchronized with the flash on your camera.
If you were to purchase this lighting set off B&H it would cost over $800.00 with tax and shipping.
I am offering it at a discount of over 100 dollars simply because it is out of the box.
HERE IS WHAT THE KIT INCLUDES:
- 2 VS- LCD400 400W Digital Monolight
- 1 Monolight Kit- 100 Total Waa/Seconds
- 1 Multiboom Light Stand/Reflector
- 2 White Translucent Umbrella 43”
- 2 Air Cushioned 4 Section Light Stand, Black- 10”
- 1 AC 16 Channel Radio Slave Transmitter
- 1 AC 16 Channel Radio Slave Reciever
- 1 Light Kit Bag- 34X13. 5x8” (86x34. 3X20 .3cm)
11 ITEMS IN TOTAL!
ONLY $680!!!
EBAY AUCTION FOR ITEM: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=290457524881&ssPageName=STRK:MESELX:IT
- click link to open ebay auction in new window-
** I can also be contacted directly for sale: kellenmoore@hauntedmansion.com
Light output can be varied in 1/10-stop stages over a 4-stop range with the VS-LCD, accessible through the digital readout. The 100W modeling light can be coupled to the flash, getting brighter or dimmer to match the actual light output, or independently set to the level you want. The monolight accepts Bowens monolight reflectors and head accessories. It also has a limited Auto Dump function, firing the strobe when you reset to a different power level (so the strobe is automatically set to the correct setting for the next flash). A built-in optical slave allows the monolight to be triggered using another flash. The EX100A monopod kit adds an additional 100w/s of light and included 24x24" softbox.
The 43" Impact white umbrellas soften and broaden the light. The Impact aluminum light stands extend to 10' in 4 sections, with sure-twist section locks. If you forget to tighten a section with your light mounted, the light comes down slowly, thanks to the air-cushioning. And the light stands will accept casters, which makes positioning the lights a snap. The convertible boom arm/light stand can be used as a 13' light stand, a boom for a small light, or to hold a reflector up to 60" in diameter. The radio slave transmitter and receiver let's you trigger the strobes without being connected to a sync cord. And you can pack it all into the included kit bag.
FOR SALE- Complete lighting set (CURRENTLY OUT OF STOCK ON B&H). This was purchased off B&H PHOTO only FOUR MONTHS ago and it was only used ONCE!
The entire kit is in PERFECT CONDITION and is the perfect set for anyone interested in photography and creating their own home studio.
This set comes with THREE LIGHTS, THREE BOOM POLES, UMBRELLAS, and a wireless set up so control the FLASH on THREE LIGHTS so it is synchronized with the flash on your camera.
If you were to purchase this lighting set off B&H it would cost over $800.00 with tax and shipping.
I am offering it at a discount of over 100 dollars simply because it is out of the box.
HERE IS WHAT THE KIT INCLUDES:
- 2 VS- LCD400 400W Digital Monolight
- 1 Monolight Kit- 100 Total Waa/Seconds
- 1 Multiboom Light Stand/Reflector
- 2 White Translucent Umbrella 43”
- 2 Air Cushioned 4 Section Light Stand, Black- 10”
- 1 AC 16 Channel Radio Slave Transmitter
- 1 AC 16 Channel Radio Slave Reciever
- 1 Light Kit Bag- 34X13. 5x8” (86x34. 3X20 .3cm)
11 ITEMS IN TOTAL!
ONLY $680!!!
EBAY AUCTION FOR ITEM: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=290457524881&ssPageName=STRK:MESELX:IT
- click link to open ebay auction in new window-
** I can also be contacted directly for sale: kellenmoore@hauntedmansion.com
Light output can be varied in 1/10-stop stages over a 4-stop range with the VS-LCD, accessible through the digital readout. The 100W modeling light can be coupled to the flash, getting brighter or dimmer to match the actual light output, or independently set to the level you want. The monolight accepts Bowens monolight reflectors and head accessories. It also has a limited Auto Dump function, firing the strobe when you reset to a different power level (so the strobe is automatically set to the correct setting for the next flash). A built-in optical slave allows the monolight to be triggered using another flash. The EX100A monopod kit adds an additional 100w/s of light and included 24x24" softbox.
The 43" Impact white umbrellas soften and broaden the light. The Impact aluminum light stands extend to 10' in 4 sections, with sure-twist section locks. If you forget to tighten a section with your light mounted, the light comes down slowly, thanks to the air-cushioning. And the light stands will accept casters, which makes positioning the lights a snap. The convertible boom arm/light stand can be used as a 13' light stand, a boom for a small light, or to hold a reflector up to 60" in diameter. The radio slave transmitter and receiver let's you trigger the strobes without being connected to a sync cord. And you can pack it all into the included kit bag.
Last edited: