Vitaliy Kiselev
Carbonite Member
Here is small prelemitary review for Leadstar LD-1088 .
From hardware standpoint it is best cheap LCD screen for movie makers.
Processor : MST719DU-LF
LCD : CLAA102NA0ACW (1024x600 resolution)
Battery : 7.4V 2300mAh
Metal 1/4" mount.
Two speakers and headphone amp (with metal socket) to check sound.
I don't go to tuner, SD card player, etc as it is not very important here.
To be short, you can check your JPEG files just by inserting SDHC card. Interface here is not good.
Image quality:
Above average for portable devices.
I like the colors.
Unit has ability to set color temperature and many other parameters for HDMI input.
Menu can be set to be almost transparent and position can be adjusted.
From software standpoint it is not all good.
First. EDID must be changed by manufacturer.
I suggest to set HDMI format to 720p60 on GH1 (as this works fine most of the time).
Sometimes GH1 go to infinite cycle trying to establish HDMI connection (turn modes wheel to go out of this and try again) on 1080i or auto modes.
Second and most important. Unit has overscan. So, framing is slightly off and also sharpness is not so good.
Using VGA it don't have any overscan, so it is HDMI only thing.
My unit is mounted on http://cgi.ebay.com/Telescopic-Arm-...118?pt=LH_DefaultDomain_0&hash=item53d73d5b76 .
This thing is very good for it's purpose.
From hardware standpoint it is best cheap LCD screen for movie makers.
Processor : MST719DU-LF
LCD : CLAA102NA0ACW (1024x600 resolution)
Battery : 7.4V 2300mAh
Metal 1/4" mount.
Two speakers and headphone amp (with metal socket) to check sound.
I don't go to tuner, SD card player, etc as it is not very important here.
To be short, you can check your JPEG files just by inserting SDHC card. Interface here is not good.
Image quality:
Above average for portable devices.
I like the colors.
Unit has ability to set color temperature and many other parameters for HDMI input.
Menu can be set to be almost transparent and position can be adjusted.
From software standpoint it is not all good.
First. EDID must be changed by manufacturer.
I suggest to set HDMI format to 720p60 on GH1 (as this works fine most of the time).
Sometimes GH1 go to infinite cycle trying to establish HDMI connection (turn modes wheel to go out of this and try again) on 1080i or auto modes.
Second and most important. Unit has overscan. So, framing is slightly off and also sharpness is not so good.
Using VGA it don't have any overscan, so it is HDMI only thing.
My unit is mounted on http://cgi.ebay.com/Telescopic-Arm-...118?pt=LH_DefaultDomain_0&hash=item53d73d5b76 .
This thing is very good for it's purpose.
Last edited:
