MIRRORLESS: Canon R6v - I bought one.

Adding an NP battery to the transmitter would save a cable - is this worth it for the extra mass and checks to perform?

I do note that the Diety and these TX/RX run on NP .. so maybe I consider opening my system to include NP
 
You make a lot of great points Morgan.

I certainly see the issues with having to add additional battery formats to your current setup. It's always nicer to be able to use what you have rather than spend additional money if you don't have to.

In this case, maybe it's a compromise of only buying 2 NPF batteries and a 2 bay charger for the Deity? If the battery life is as advertised then you either don't have to change a battery all day and you have one spare in reserve, or, you swap batteries at lunch if you're worried about power. Then throw the other battery back on the charger and you're set in case something else happens.

My preferred setup with the Canon C50 is to have a single LP-E6P in the camera and then I power the camera additionally through a V-mount that is using one of the USB-C power outs on the plate and then the USB-C charge port in the C50.

Screenshot 2026-11-21 at 8.15.54 AM.png

This obviously increases the size of everything, but I've found it to be a pretty robust solution for normal filming. And if you need to go smaller at times (car mount, etc?), just slide the camera body out of the overall arca setup and run it off the internal for the duration of the shot? If it needs to stay powered and rigged for hours at a time though, then it's probably worth keeping it attached to the larger battery.

Every setup has tradeoffs of course. But since you need to eliminate the ground loop hum, it's worth addressing that first and then working outwards from that maybe?
 
Last edited:
Hey thanks for reading. And commenting.

My TX/RX system also uses the NP batts, and I can throw the TX onto other (rental or producers) cameras relying on those cameras can be a challenge.
So there is a good argument for getting some NP

The diety ones are not in stock in the UK, .. to me its probably Amzon (disposable) or hawkwoods (a ten year investment) !

----------------------

To usb into the camera that is worth consideration. Thank for suggesting that.

I dont want to spend on LPE6p and have them not work in my next canon which will use LPE6z

USb stick out the side and fouls the flip out screen which has put me off

RUnning the camera from a 'phone brick' has put me off

I prefer the dummy batt to vlcok but it is slow to remove.

WIth usb I could very easily 'free' the camera for short shots

Ive aquired this Dttap to USB PD and will play with it..

dtapusb.JPG
 
The Acam was my DOPs C70 which I added my TX to to allow the producer/director to see the frame of the Acamera (RX on my Atomos monitor)

I set the lighting and the track(s) for the TV gag.

Lastly I operated the R6V as bcam, providing only a few shots.. piano keys, hi hat, bass fingers et al.

I switched on my F21 to a tv on cue, it then ran in Cool TV mode.
The 'fire' is a pavo tube in 'fire mode' my dedos add sparkle to the BG and Key and fill ae nanlux 300
You may note that the white sheets outside were used with added black molten to block the sun in the middle of the day and had to be lit by my 600 by the end of the day.


Seasons greetings!

 
Last edited:
Daily update. My current thoughts. A lot based around changing the 'mode/build' of the camera


Im gonna use the dummy battery, In a minimal build I will use this bpu plate, using some quite fine (for me) engineeting I attached the BPU plae to a nato clamp meaning that this battery can be..

-mounted on the top
-mounted on the side
-removed quickly ready to place my camera in my Movi or on a big shoulder rig.

Next I work on plating up the TX box

---

NP batteries - im doing some test on the cheap ones I have, It seems that a voltmeter will read 8v if the battery is charged and functional.

I can see that NP with make some builds neat.

WhatsApp Image 2026-11-22 at 13.50.52.jpeg
 
Should the battery wobble or shake or take too much room (in a car rig) I have a nato receiver to allow it to be hard mounted near the camera.

The LPE6p will be a welcome spare for my R6i
 
Last edited:
Back
Top